Stanley Security Grade 1 Surfa...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$255.00
$242.38
Stanley Security Grade 1 Surface Closer, Size 1-4, Hold Open

Stanley Security Grade 1 Surface Closer, Size 1-4, Hold Open

(No reviews yet) Write a Review
New Parts & Accessories Available!

Model: D-1611H 695
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$255.00
$242.38
Adding to cart… The item has been added
New Parts & Accessories
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Stanley Security Grade 1 Surface Closer, Size 1-4, Hold Open

The D-1610 Series is a slim line closer uniquely designed to accommodate the standard aluminum storefront application foot print. The pinion and piston are constructed of cold forgedsteel maintaining critical tolerances for reliable performance. The nonhanded cylinder body incorporates a robust cast aluminum construction

D-1611 Series Door Closers are adjustable from size 1 – 4 (2lbf – 8lbf closing force measured 30” from the pivot). The D-1611 Series. Door Closers are designed to meet entrance accessibility requirements of 5lbf opening force or less.

Cut Sheet

Manufacturer Resources

Product Specs

Series:
D-1611
ADA Compliant:
Yes
Mounting Detail:
Surface - Hinge Mount(Pull Side), Top Jamb Mount(Push Side), Parallel Arm Mount(Push Side)
Mounting Location:
Pull Side
Subcategory:
Surface Mounted Closers
Product Group:
Door Controls
Product Subgroup:
Door Closers - Surface Mounted
Product Type:
Surface Mounted Door Closers
Finish Type:
Powder Coat
Fluid Type:
All-Weather
Commercial/Residential:
Commercial
Mounting Method:
Surface Mount
Product Substrate:
Iron
Product Category:
Door Controls
Department:
Door Hardware

Parts & Accessories

    Stanley Security D-1611H 695 – Frequently Asked Questions

    1) Will the Stanley D-1611 closer fit a narrow aluminum storefront door?
    That is what the D-1610 Series slim line body was shaped for. The cylinder is sized to the standard aluminum storefront application footprint, so it sits on the narrow top rail of a storefront door without hanging past it. The body is cast aluminum with a cold forged steel pinion and piston.
    2) Does the Stanley D-1611 door closer meet ADA opening force requirements?
    Yes. The D-1611 is built to meet entrance accessibility requirements of 5 lbf opening force or less, and it is flagged ADA compliant in the specs. To hit that number you dial the spring down toward the low end of its range rather than leaving it at maximum.
    3) How heavy a door will a size 1-4 closer handle?
    The D-1611 adjusts across spring sizes 1 through 4, which is 2 lbf to 8 lbf of closing force measured 30 inches from the pivot. That covers typical interior and storefront openings. For an exterior door fighting wind or stack pressure you usually want a closer that goes higher, such as the Arrow DCN325 or the BEST EHD9000, both adjustable through size 6.
    4) Can this Stanley closer be mounted on the push side of the door?
    Yes. Three mounting arrangements are supported: hinge (pull side) mount, top jamb mount on the push side, and parallel arm mount on the push side. Parallel arm is the usual pick when you want the closer tucked against the frame face on the stop side, top jamb when there is no usable top rail on the door itself.
    5) What is the closest alternative to the Stanley Security D-1611 hold open surface closer if hold open is required on another brand?
    The Stanley Security D-1611 is a size 1-4 adjustable surface closer with a hold open function. For hold open in another brand, the Accentra 51 Series is supplied with a tri-packed hold open arm and an adjustable size 1-6 spring, and the Orca Hardware BHDC1958HO/PA also carries a tri-packed hold open arm with a parallel bracket for 1-3/4 inch doors. Both give you the hold open feature; the Accentra 51 covers a wider spring range than the D-1611's size 1-4.
    6) Which door closers are built for aluminum storefront openings like the Stanley D-1611?
    The Stanley Security D-1611 is a slim line closer designed around the standard aluminum storefront application footprint, adjustable size 1-4. The Norton Rixson 1600BC Series is likewise described as an aluminum storefront closer with tri-style mounting and is rated heavy duty Grade 1. The BEST SL6000 Series is another slim line style option, light duty and Grade 1.
    7) If the opening needs more spring power than a size 1-4 closer provides, what should be used instead of the Stanley D-1611?
    The Stanley Security D-1611 adjusts from size 1 through 4, roughly 2 lbf to 8 lbf closing force measured 30 inches from the pivot. For heavier or wider doors, the BEST EHD9000 Series is an extra heavy-duty Grade 1 closer adjustable size 1-6, the Imperial USA TC4300 Series is a heavy duty size 1-6 ADA closer, and the Norton Rixson 8501A is a Grade 1 tri-mount closer with an adjustable size 1-6 spring.
    8) Which closers look like substitutes for the Stanley D-1611 hold open but do not hold the door open?
    Several similar-looking surface closers ship with non-hold-open arms and will not do what the Stanley Security D-1611 hold open does. The Accentra 1101BF and Accentra 2701 are supplied with tri-packed non-hold open arms, the Design Hardware 116, 316 and 416 Series all carry tri-packed non-hold open arms, and the Dorma 8916-JT is a flat non-hold open arm closer. If the opening has to stand open, these are not drop-in replacements.
    9) Is the hold open feature on this closer adjustable, or does it hold at a fixed point?
    The D-1611 hold open configuration is the hold open arm version of the series, so the door stays open at the set point instead of self-closing. Keep in mind that a hold open arm is not permitted on a fire rated opening unless it is released by the alarm system; on a fire door you want the non-hold-open arm instead.
    10) Will this closer work outdoors in cold weather?
    It uses all-weather hydraulic fluid, so closing speed stays reasonably consistent across a temperature swing rather than slowing to a crawl in winter. That is what makes it workable on a storefront entrance rather than interior doors only.
    11) Do I have to specify handing when I order the D-1611?
    No. The cylinder body is non-handed, so one unit works on a left or right hand door. What you do have to decide is the mounting arrangement, since that dictates which arm and bracket the job needs.
    12) What is a comparable slim line storefront closer if the Stanley D-1611 is not the right fit?
    For the same aluminum storefront application, the Norton Rixson 1600 Series is sold specifically as an aluminum storefront closer with tri-style mounting, and the BEST SL6000 is a Grade 1 slim line surface closer with adjustable spring sizes. If you need the higher spring range, the Arrow DCN325 covers sizes 1 through 6.
    13) Which alternatives to the Stanley D-1611 also offer tri-mount regular, top jamb and parallel arm mounting?
    The Stanley Security D-1611 mounts hinge side (pull side), top jamb (push side), or parallel arm (push side) from one nonhanded cylinder. Comparable tri-mount closers include the Dexter DCH1000 Series and DCM1000 Series, both Grade 1 surface closers offered in regular, parallel or top jamb mounting, the Norton Rixson 1601P Grade 1 tri-mount medium duty closer, and the Arrow DCN314, a Grade 1 surface closer with regular/parallel arm tri-pack adjustable size 1-4.
    14) Is there a Grade 2 option instead of the Grade 1 Stanley D-1611 closer for lighter interior doors?
    The Stanley Security D-1611 is a Grade 1 commercial closer. If the opening is specified to a lower grade, the Cal-Royal 400 Series is a Grade 2 commercial hydraulic door closer and the Falcon SC91A is a Grade 3 light duty cast aluminum surface closer. For an ADA barrier-free Grade 1 alternative, the Cal-Royal 500S offers adjustable back-check.
    15) What alternative to the Stanley D-1611 uses a slide track or delayed action arm instead?
    The Stanley Security D-1611 uses a conventional arm in hinge, top jamb or parallel arm mounting. Where the spec calls for a track arm, the Corbin Russwin DC5230 is a Grade 1 surface closer with a slide track arm standard, pull side mounted, for 1-3/4 inch doors. For delayed action, the Orca Hardware BHDC1958DA/PA and BHDC2011DA/PA are delayed action closers with a regular arm and parallel bracket for 1-3/4 inch doors.
    16) How does the Stanley D-1611 compare with the LCN 1261 for a light to medium traffic opening?
    The Stanley Security D-1611 is a Grade 1 surface closer adjustable size 1-4 with a cast aluminum nonhanded cylinder body, all-weather fluid, and powder coat finish in 689 aluminum painted or 695 dark bronze painted. The LCN 1261 of the 1260 Series is rated light to medium duty with cast iron construction and adjustable spring sizes 1-5. The LCN 1250 Series is light duty, sizes 1-5, with all-weather fluid.
    17) Which medium duty Grade 1 closers compete with the Stanley D-1611 for standardizing across a facility?
    The Stanley Security D-1611 is a Grade 1 commercial surface closer adjustable size 1-4. Medium duty Grade 1 peers commonly standardized across facilities include the Sargent 1131 and Sargent 1331, the BEST HD7000 Series with adjustable spring power and backcheck control, the Falcon SC81A cast aluminum closer, and the Dormakaba 7414 size 1-4. All are Grade 1 surface mounted; they differ in body construction and arm packaging.
    18) What finishes does the Stanley D-1611 surface closer come in?
    Two: 689 aluminum painted and 695 dark bronze painted, both powder coat. If you are standardizing a building, 689 matches clear anodized aluminum storefront and 695 matches dark bronze anodized frames.
    19) Is this closer rated for commercial traffic or is it a residential unit?
    It is a commercial-duty surface mounted closer, not a residential product. For light residential or low-traffic interior doors, Deltana's DC10 or DC40 closers are the lighter-duty option.
    How fast can I get the Stanley Security D-1611H 695 delivered?
    Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
    Can I return it if it doesn’t work for me?
    Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
    Does the Stanley Security D-1611H 695 come with a warranty?
    Absolutely. The Stanley Security D-1611H 695 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
    How do I get technical support or installation help for the Stanley Security D-1611H 695?
    You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
    Why buy the Stanley Security D-1611H 695 from ZenSupply?
    ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
    !