You may also like
4SQ SURF CVR 5CU DPLX+TGL 1/2 RSD
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States
- Selling Unit Of Measure:
- each
- Standards:
- UL E2969
- Surface Finishing:
- Pre-Galvanized
- Volume:
- 5 in³
- Department:
- Electrical
- Product Group:
- Boxes & Enclosures
- Product Subgroup:
- Box Covers
- Product Type2:
- Outlet Box Covers
- Product Size:
- 4 Inches
- Product Color:
- Silver
- Product Shape:
- Square
- Product Material:
- Steel
- Product Type:
- Raised Device Cover
Steel City RS 2 – Frequently Asked Questions
1) What device combination does the Steel City RS 2 square box cover accept?
The RS 2 is a combination cover for a 4 inch square box: one opening for a duplex receptacle and one for a toggle switch, side by side on a single raised cover. If you need two receptacles or two switches on the same box, this is not the right cover.
2) How much extra box volume does the RS 2 raised cover add?
5 cubic inches. That counts toward your box fill calculation, so a 4 inch square box plus this cover gives you 5 in3 more room for conductors and device yokes than a flat cover would.
3) How deep is the raise on the Steel City RS 2 cover?
It's a 1/2 inch raised cover, which is what you want when the box is set behind drywall or paneling and the devices need to come forward to the finished surface. For flush-set boxes in exposed work, a flat cover is the simpler choice.
4) Is the RS 2 cover UL listed?
It carries UL file E2969.
5) Is a pre-galvanized steel box cover suitable for damp or outdoor locations?
The RS 2 is pre-galvanized steel, which is a dry and general indoor interior finish, not a weatherproof assembly. Outdoor or wet-location work needs a gasketed weatherproof cover with in-use or flip lids, not a plain raised device cover.
6) I need to hang a 4 inch square box off 1/2 inch conduit instead of mounting devices in it - what cover do I use?
For hanging a 4 inch square box from pipe, the RACO 897KH is the swivel cover made for that purpose; it is listed for 1/2 or 3/4 in. pipe. The Steel City RS 2 is a pre-galvanized steel raised surface cover with a duplex and toggle opening and 5 cubic inches of added volume, which is what you want when the box is holding a receptacle and a switch rather than being supported from conduit.
7) Is the Steel City RS 2 sold individually or by the box?
Sold each, so you can order the exact count for the job rather than a carton quantity.
8) Where is the Steel City RS 2 cover made, and what does it look like installed?
Made in the United States. The finish is bare pre-galvanized steel with a silver appearance, which is standard for exposed commercial and industrial work where covers aren't painted.
How fast can I get the Steel City RS 2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Steel City RS 2 come with a warranty?
Absolutely. The Steel City RS 2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Steel City RS 2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Steel City RS 2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.