You may also like
1 1/2 INCH STRAP,EMT,STL,2 HOLE
Manufacturer Resources
Product Specs
- Product Material:
- Steel
- Surface Finishing:
- Zinc Plated
- Product Type:
- Conduit Strap
- Department:
- Electrical
- Product Group:
- Hangers, Supports & Fasteners
- Product Subgroup:
- Hangers, Straps & Supports
- Selling Unit Of Measure:
- each
Steel City TS 903 – Frequently Asked Questions
1) What conduit sizes does the Steel City TS 900 series 2-hole EMT strap come in?
Three sizes: 1 inch (TS 903), 1-1/2 inch (TS 905), and 2 inch (TS 906). The size refers to the trade size of the EMT it straps, so match the strap to the conduit trade size you are running, not to the outside diameter.
2) Can I use these Steel City steel EMT straps outdoors or in a damp location?
The strap is steel with a zinc plated finish, which is a general purpose indoor/dry-location plating. Zinc plating gives limited corrosion resistance, so for exterior walls, wet areas, or corrosive environments most electricians step up to a hot-dip galvanized or stainless strap rather than plated steel.
3) Do I get a box of straps or a single strap when I order the Steel City TS 905?
These are sold each, so one strap per unit. Two-hole straps take two fasteners apiece, so count your support points, then order the strap quantity and the screws or anchors separately.
4) Are mounting screws or anchors included with the 2-hole EMT strap?
No. The strap is the only item supplied. Each one has two mounting holes, so you will need to supply your own fasteners suited to the substrate, wood screws into studs or blocking, self-drilling screws into metal, and expansion or toggle anchors into masonry or hollow walls.
5) Should I use a 2-hole strap or a 1-hole strap for 2 inch EMT?
A two-hole strap like the TS 906 grips the conduit on both sides of the run and resists twisting, which is why it is the usual choice on larger trade sizes and on horizontal runs carrying real weight. One-hole straps are quicker and fine for small trade sizes on light work, but at 1-1/2 and 2 inch EMT the two-hole pattern is what most inspectors and specs expect.
6) Will a 1 inch EMT strap hold flexible metal conduit or rigid pipe instead?
It is made for electrical metallic tubing. EMT, rigid, and IMC of the same nominal trade size have different outside diameters, so a 1 inch EMT strap (TS 903) will be loose or tight on anything else. Use a strap sized for the raceway type you are actually installing.
7) Where are Steel City EMT straps made?
Country of origin is listed as the United States and India, so the source country can vary by production run. The part number and specification are the same either way.
How fast can I get the Steel City TS 903 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Steel City TS 903 come with a warranty?
Absolutely. The Steel City TS 903 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Steel City TS 903?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Steel City TS 903 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.