Strut Clamp 1 pc 1" - 3/4" (Box 50)
Additional Notes
- other sizes and quantities available by request
Features
- No screws or bolts to drop
- One Piece Strut Clamps For EMT/Rigid Conduit
- Requires only a screwdriver or nutdriver for installation
- Soft wide saddle supports cable conduit & pipes
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Length:
- 1
- Fastener Width:
- 1
- Language Code:
- EN
- Order Minimum Imperial:
- 50
- Order Minimum Uom Imperial:
- CT
- Pack Type:
- Box
- Product Group:
- Electrical Hardware
- Product Height:
- 3.25 in
- Product Length:
- 7.25 in
- Product Weight:
- 6.5 lbs
- Product Width:
- 6.75 in
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Conduit Clamps
- Product Type:
- Strut Clamp
- Type2:
- Strut Clamp
- Product Finish:
- Galvanized
- Product Details:
- Strut Clamp
- Product Material:
- Steel
Metallics 1PSC100 – Frequently Asked Questions
1) What conduit sizes does the Metallics 1PSC100 strut clamp fit?
The 1PSC100 is sized for 1 inch EMT and 3/4 inch rigid conduit. It is a one-piece strut clamp for EMT and rigid conduit runs, so if your run is a different trade size you need a different clamp in the series rather than this one.
2) Do I need separate nuts and bolts to install a one-piece strut clamp?
No. The one-piece design has no loose screws or bolts to drop in a ceiling or a lift basket, and it installs with just a screwdriver or nutdriver. That is the main reason electricians choose one-piece over a two-piece strut strap with a separate channel nut and bolt.
3) Does the Metallics 1PSC100 meet Buy American requirements on a federally funded job?
Metallics lists the 1PSC100 as both Buy American compliant and ARRA compliant, which is what a government, school, or healthcare procurement office typically needs on the submittal. Country of origin is listed as multiple.
4) Are these strut clamps galvanized steel, and will they hold up in a parking garage or damp mechanical room?
Material is steel with a galvanized finish, which is the usual spec for interior and protected exterior strut runs. For continuously wet, coastal, or chemically aggressive locations, buyers normally step up to a stainless or PVC-coated clamp instead.
5) Can I get this one-piece strut clamp in other conduit sizes or pack quantities?
Yes. Metallics offers the one-piece strut clamp in other sizes and quantities by request, so a contractor running mixed 1/2, 3/4, and 1 inch EMT off the same strut can stay in one clamp family across the job.
6) Will the 1PSC100 clamp damage or crush the conduit when I tighten it?
The clamp uses a soft wide saddle that supports conduit, cable, and pipe across a broader bearing surface rather than pinching a narrow band. That is what lets it hold a run tight to the strut without deforming thin-wall EMT.
How fast can I get the Metallics 1PSC100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics 1PSC100 come with a warranty?
Absolutely. The Metallics 1PSC100 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics 1PSC100?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics 1PSC100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.