Square D 2510K Manual Motor Sw...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$75.53
Square D 2510K Manual Motor Switch, Toggle Operated

Square D 2510K Manual Motor Switch, Toggle Operated

(No reviews yet) Write a Review

Model: 2510KO1

In Stock (leaves warehouse same day if ordered before 3pm ET)

$75.53
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Square D 2510K Manual Motor Switch, Toggle Operated

The Square D 2510K manual motor switch is a toggle-operated, 2-pole switch rated for 30A line current, built for industrial, commercial, and residential applications where overload protection is not required or is provided separately. This unit provides simple manual On/Off control and carries a rated operational voltage (Ue) of 600V AC and 230V DC, with motor power ratings including 3 HP at 575V AC, 3 HP at 460V AC, 2 HP at 230V AC, 2 HP at 115V AC, 2 HP at 115V DC, 1.5 HP at 230V DC, and 1 HP at 90V DC. It is supplied without a pilot light indicator and is UL Recognized and CSA certified for dependable performance.

Key Features

  • Line Rated Current: 30A for reliable manual motor disconnect and control.
  • Poles: 2-pole (2P) configuration for single-phase circuits.
  • Motor Power Rating: 3 HP at 575V AC; 3 HP at 460V AC; 2 HP at 230V AC and 115V AC; 2 HP at 115V DC; 1.5 HP at 230V DC; 1 HP at 90V DC.
  • Operational Voltage (Ue): 600V AC and 230V DC.
  • Toggle Operated, No Indicator: Two-pole, 30 amp switch without a pilot light indicator for straightforward manual On/Off operation.
  • Wire Range: AWG 14...AWG 10 copper conductors.
  • Mounting: Open type fits industry standard single-gang switch boxes for direct mounting in a wall or machine.
  • Design: Simple design, small size, and easy to install.

Certifications & Compliance

  • CSA LR25490 Class 3211 05
  • UL Recognized E42243 CCN NLRV2
  • California Proposition 65 Warning: this product can expose you to chemicals including lead and lead compounds, known to the State of California to cause cancer and birth defects or other reproductive harm.

Technical Specifications

  • Warranty: 18 months
  • Poles Description: 2P
  • Country of Origin: Mexico

Typical Applications

  • Industrial Motor Disconnect and Control
  • Commercial Equipment Switching
  • Residential Motor Applications
  • Single-Gang Wall or Machine-Mounted Switch Boxes
  • Applications Where Overload Protection Is Provided Separately

Why Square D?

Square D 2510K manual motor switches deliver UL Recognized, CSA certified performance backed by an 18-month warranty, giving electricians, contractors, and OEM panel builders a dependable, code-aware component for manual motor control. The simple, compact toggle-operated design installs easily into standard single-gang boxes, making it a practical choice for industrial, commercial, and residential motor switching needs.

Manufacturer Resources

Product Specs

Product Type:
Manual Motor Switch
Series:
2510K
Voltage Rating:
600V AC
Amperage Rating:
30A
Configuration:
2-Pole, Toggle Operated
Listing:
UL Recognized
Standards:
CSA
Country of Origin:
Mexico
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Motor Starters

Square D 2510KO1 – Frequently Asked Questions

1) Does the Square D 2510KO1 manual motor switch provide overload protection?
No. The 2510KO1 is a manual On/Off switch only, intended for applications where overload protection is not required or is supplied separately by another device such as an overload relay or branch circuit protection. If your motor needs overload protection at the switch, this is not the part. Use it as a manual disconnect or local control point.
2) What horsepower motor will a Square D 2510K 30A toggle switch handle?
Motor ratings run 3 HP at 575V AC, 3 HP at 460V AC, 2 HP at 230V AC, and 2 HP at 115V AC. On DC it is 2 HP at 115V DC, 1.5 HP at 230V DC, and 1 HP at 90V DC. The 30A figure is line rated current, so size by the HP/voltage pair that matches your motor nameplate rather than by amps alone.
3) Can I use a 2-pole Square D 2510K on a three-phase motor?
No. The 2510KO1 is a 2-pole device for single-phase circuits, so it will not break all three ungrounded conductors of a three-phase motor. For three-phase you need a 3-pole manual motor switch. The 575V and 460V horsepower ratings on this unit apply to its two-pole configuration, not to three-phase switching.
4) Will this Square D manual motor switch mount in a standard single-gang box?
Yes. It ships as an open-type unit that fits industry standard single-gang switch boxes, so it drops into a wall box or a box mounted on the machine itself. Because it is open type, it has no enclosure of its own, so the box or panel has to provide the protection for the location.
5) What wire size do the terminals on the Square D 2510KO1 accept?
Terminals take AWG 14 through AWG 10 copper conductors. If your circuit is pulled in #8 or larger, or in aluminum, this switch will not land your conductors and you need a different device.
6) Is the Square D 2510K switch UL listed or UL recognized, and is it CSA approved?
It is UL Recognized under file E42243, CCN NLRV2, and CSA certified under LR25490, Class 3211 05. Recognized is a component listing, not a standalone UL Listing, which matters if an inspector or a panel build spec calls specifically for a UL Listed device.
7) Does the 2510KO1 have a pilot light to show when the motor is running?
No indicator on this one. The 2510KO1 is supplied without a pilot light, so it gives plain toggle On/Off with no visual status. If your operators need a run indication at the switch, specify a pilot light version of the 2510K instead.
8) What voltage can a Square D 2510K manual motor switch be used at?
Rated operational voltage is 600V AC and 230V DC, so it covers common 120V, 208V, 240V, 480V and 575V AC motor circuits as well as DC control up to 230V. Horsepower capacity drops as voltage drops, so check the HP rating at your actual system voltage.
9) Can I use this as a service disconnect for a rooftop unit or a shop machine?
It works as a local manual disconnect and control point for single-phase loads within its ratings, and the open-type body is meant to go in a single-gang box in a wall or on the machine. For outdoor or wet locations you would need a suitable enclosure, since the switch itself is open type with no housing.
10) Where is the Square D 2510KO1 manufactured?
Country of origin is Mexico. That is the detail procurement teams usually need for domestic-preference or trade documentation on a bid package.
How fast can I get the Square D 2510KO1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Square D 2510KO1 come with a warranty?
Absolutely. The Square D 2510KO1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Square D 2510KO1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Square D 2510KO1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!