You may also like
TALON INSUL CONN 4/0-1/0 1/0-6
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- Insulated Conductor Connectors
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Temperature Range:
- Max 90 °C
- Type2:
- Mechanical connectors
- Voltage Rating:
- 300 V
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Color:
- Black
Blackburn IPC4111 – Frequently Asked Questions
1) What wire sizes does the Blackburn IPC4111 Talon insulated connector take?
The IPC4111 is a two-port insulated tap connector: the run port takes 4/0 through 1/0, and the tap port takes 1/0 through 6 AWG. So it is built for tapping a smaller branch conductor off a large feeder without cutting the run.
2) Can I use the IPC4111 on 600V feeders in a panel?
No. The IPC4111 carries a 300 V rating, so it is not suitable for 600 V circuits. For a tap on a 600 V feeder you need a connector rated 600 V or higher.
3) Is this Talon connector rated for 90 degree C THHN conductors?
Yes. The IPC4111 is rated to a maximum of 90 degrees C, which covers THHN/THWN-2 conductors terminated at their 90 C insulation rating.
4) Do I need to tape or boot this connector after making the tap?
No separate insulating is needed for the connector body. The IPC4111 is an insulated mechanical connector, so the insulation is part of the device rather than something you add with tape or a cover. It is a mechanical (set-screw type) connector, not a compression lug, so no crimp tool or die set is required either.
5) What color is the Blackburn Talon IPC4111 body, and where is it made?
Black insulation body, manufactured in Mexico. The black housing is useful when you want taps to look consistent across a gutter or trough full of connectors.
How fast can I get the Blackburn IPC4111 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn IPC4111 come with a warranty?
Absolutely. The Blackburn IPC4111 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn IPC4111?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn IPC4111 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.