You may also like
Tapcon Flat Head Concrete Screw, Blue Climaseal Coating, Box of 100
Model: TAP-CSF
Tapcon Flat Head Concrete Screw, Blue Climaseal Coating, Box of 100The Tapcon Flat Head Concrete Screw is engineered for dependable fastening into concrete, block, and masonry surfaces. Each screw...
Tapcon
Starting at
$13.91
Minerallac 1/4" x 3-1/4" Tapcon Concrete Screws with Hex Washer Head and Blue Climaseal Coating
Model: MIN-60352J
Minerallac 1/4" x 3-1/4" Tapcon Concrete Screws with Hex Washer Head and Blue Climaseal CoatingProfessional Concrete Fastening Solutions with Enhanced Corrosion ProtectionMinerallac delivers...
Minerallac
$92.00
Minerallac Tapcon Concrete Screws 1/4" x 2-1/4" Hex Washer Head with Blue Climaseal Coating, 100 Pack
Model: MIN-60336J-2
Minerallac 1/4" x 2-3/4" Tapcon Concrete Screws with Hex Washer Head and Blue Climaseal CoatingProfessional Concrete Fastening Solutions with Enhanced Corrosion ProtectionMinerallac delivers...
Minerallac
Starting at
$37.33
Minerallac Tapcon Concrete Screws 3/16" x 1-1/4" Hex Washer Head with Blue Climaseal Coating, 100 Pack
Model: MIN-60120J
Minerallac Tapcon Concrete Screws 3/16" x 1-1/4" Hex Washer Head with Blue Climaseal CoatingProfessional Concrete Fastening Solutions with Enhanced Corrosion ProtectionMinerallac Tapcon concrete...
Minerallac
$50.31
$31.43
Tapcon Hex Washer Head Concrete Screw, Blue Climaseal Coating
The Tapcon Hex Washer Head Concrete Screw is a steel masonry fastener finished in Tapcon's signature Blue Climaseal coating for added corrosion resistance. Each screw features a hex washer head for easy driving with a nut driver or wrench and a large bearing surface for secure hold. This item is sold in a box of 100, making it a practical choice for contractors and job sites that need a reliable supply of concrete screws on hand.
Key Features
- Hex Washer Head Design: Allows for fast, efficient driving with a nut driver or wrench and provides a wide bearing surface for a secure, flush fastening.
- Blue Climaseal Coating: A distinctive blue coating engineered to help resist corrosion, extending the usable life of the fastener in demanding environments.
- Durable Steel Construction: Made in the USA from US or Canadian steel for dependable strength when anchoring into concrete and masonry.
- Box of 100: Packaged in a box quantity of 100 screws, ideal for stocking job sites or completing larger anchoring projects without running short.
- Concrete Screw Design: Purpose-built threading designed to anchor directly into concrete, brick, and block without the need for a separate anchor.
Technical Specifications
- Country of Origin: Made in the USA from US or Canadian Steel
- Box Quantity: 100
Typical Applications
- Fastening to Concrete, Brick, and Block
- Anchoring Fixtures and Hardware to Masonry Surfaces
- New Construction and Renovation Projects
- Exterior and Weather-Exposed Installations
- Commercial and Residential Job Sites
Why Tapcon?
Tapcon concrete screws are made in the USA from US or Canadian steel and finished with the Blue Climaseal coating to help guard against corrosion on the job site. The hex washer head design makes installation straightforward for professionals who need a consistent, reliable anchor into concrete and masonry. Packaged in boxes of 100, this Tapcon concrete screw is built to keep crews stocked and projects moving without compromising on quality or durability.
Specifications by Size
| Size | Part # | Pull-Out (lbs.)* | Shear (lbs.)* | Bit Size | Box Qty | Max. Fixture Thickness | Min. Edge Distance | Min. Embedment | Min. Fixture Hole Ø (Hole Spotted) | Min. Fixture Hole Ø (In Place) | Min. Spacing | Thread Length | Thread Type | Driver Size | UPC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/16" x 1-1/4" | HW-3114 | 600 | 720 | 5/32" | 100 | 1/4" | 2-1/4" | 1" | 1/4" | 1/4" | 3" | 1-1/4" | Threadform Technology™ | 1/4" | 092097951358 |
| 3/16" x 1-3/4" | HW-3134 | 600 | 720 | 5/32" | 100 | 3/4" | 2-1/4" | 1" | 1/4" | 1/4" | 3" | 1-3/4" | Threadform Technology™ | 1/4" | 092097951365 |
| 3/16" x 2-1/4" | HW-3214 | 600 | 720 | 5/32" | 100 | 1-1/4" | 2-1/4" | 1" | 1/4" | 1/4" | 3" | 1-3/4" | Threadform Technology™ | 1/4" | 092097951372 |
| 3/16" x 2-3/4" | HW-3234 | 600 | 720 | 5/32" | 100 | 1-3/4" | 2-1/4" | 1" | 1/4" | 1/4" | 3" | 1-3/4" | Threadform Technology™ | 1/4" | 092097951389 |
| 3/16" x 3-1/4" | HW-3314 | 600 | 720 | 5/32" | 100 | 2-1/4" | 2-1/4" | 1" | 1/4" | 1/4" | 3" | 1-3/4" | Threadform Technology™ | 1/4" | 092097951396 |
| 1/4" x 1-1/4" | HW-4114 | 750 | 900 | 3/16" | 100 | 1/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-1/4" | Threadform Technology™ | 5/16" | 092097951426 |
| 1/4" x 1-3/4" | HW-4134 | 750 | 900 | 3/16" | 100 | 3/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Threadform Technology™ | 5/16" | 092097951433 |
| 1/4" x 2-1/4" | HW-4214 | 750 | 900 | 3/16" | 100 | 1-1/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Threadform Technology™ | 5/16" | 092097951440 |
| 1/4" x 2-3/4" | HW-4234 | 750 | 900 | 3/16" | 100 | 1-3/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Threadform Technology™ | 5/16" | 092097951457 |
| 1/4" x 3-1/4" | HW-4314 | 750 | 900 | 3/16" | 100 | 2-1/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Threadform Technology™ | 5/16" | 092097951464 |
| 1/4" x 3-3/4" | HW-4334 | 750 | 900 | 3/16" | 100 | 2-3/4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Threadform Technology™ | 5/16" | 092097951471 |
| 1/4" x 4" | HW-4400 | 750 | 900 | 3/16" | 100 | 3" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Threadform Technology™ | 5/16" | 092097951488 |
| 1/4" x 5" | HW-4500 | 750 | 900 | 3/16" | 100 | 4" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Threadform Technology™ | 5/16" | 092097951495 |
| 1/4" x 6" | HW-4600 | 750 | 900 | 3/16" | 100 | 5" | 3" | 1" | 5/16" | 5/16" | 4" | 1-3/4" | Threadform Technology™ | 5/16" | 092097902961 |
* Pull-out and shear values are average ultimate loads in 2000 PSI concrete, offered as a guide only and not guaranteed. A 4:1 safety factor (25% of ultimate) is generally accepted as a safe working load.
Manufacturer Resources
Product Specs
- Product Brand:
- Tapcon
- Product Type:
- Hex Head Concrete Screw
- Country Of Origin:
- United States
- Box Quantity:
- 100
- Department:
- Fasteners
- Product Group:
- Concrete Anchors
- Product Subgroup:
- Concrete Screws
- Product Material:
- Blue Climaseal Coated
- Location Rating:
- Dry to Moist
Tapcon CSH14114;T – Frequently Asked Questions
1) What size drill bit do I need for Tapcon hex washer head concrete screws?
Bit size depends on diameter, not length. All 3/16 inch Tapcon hex washer head screws drill with a 5/32 inch carbide bit; all 1/4 inch sizes use a 3/16 inch bit. Those bits are not included in the box of 100, so order them separately if you don't already have them on the truck.
2) How do I pick the right screw length for the thickness of what I'm fastening to concrete?
Work from the max fixture thickness column, because every size needs 1 inch of minimum embedment in the concrete. A 1/4 x 1-1/4 handles a 1/4 inch fixture, 1/4 x 2-1/4 handles 1-1/4 inch, 1/4 x 4 handles 3 inch, and 1/4 x 6 handles up to 5 inch. On the 3/16 side, 3/16 x 1-1/4 takes 1/4 inch of material up to 3/16 x 3-1/4 at 2-1/4 inch. Pick the length so the material thickness plus at least 1 inch of embedment is covered.
3) How close to the edge of a concrete slab can I set a Tapcon hex head screw?
Minimum edge distance is 2-1/4 inches for the 3/16 inch diameter screws and 3 inches for the 1/4 inch diameter. Minimum spacing between anchors is 3 inches for 3/16 and 4 inches for 1/4. If you're pinning a plate near a slab edge or along a block cell, the smaller 3/16 diameter buys you the tighter layout.
4) Do I need a separate shield or plastic anchor with a Tapcon concrete screw?
No. The threadform cuts its own thread directly into concrete, brick, or block, so you drill the hole and drive the screw. That is the practical difference between a concrete screw and a sleeve or wedge anchor: it's removable, it's a one-step install, and it doesn't expand against the hole wall, which is what lets you work closer to an edge.
5) What size hole do I need in the fixture or steel I'm bolting down?
The hole through the material has to clear the threads: 1/4 inch minimum for the 3/16 inch screws and 5/16 inch minimum for the 1/4 inch screws. Those figures apply whether you spot the hole through the fixture or drill the concrete with the fixture already in place. Undersize the fixture hole and the thread binds in the steel instead of cutting into the concrete.
6) What size nut driver or socket drives these Tapcon screws?
The hex washer head takes a 1/4 inch driver on the 3/16 inch diameter screws and a 5/16 inch driver on the 1/4 inch diameter screws. No bit tip or Phillips needed, which is why crews use this head style for overhead and ladder work where a cam-out would cost them the hole.
7) Can I use these blue Tapcon screws outdoors or in a wet area?
The Blue Climaseal coating is a corrosion-resistant finish on a steel screw, and the fastener is rated for dry to moist locations. That covers typical exterior and weather-exposed work on concrete, brick, and block. It is not a stainless fastener, so for submerged, constantly wet, or chemically aggressive settings you want a stainless anchor instead.
8) Will a Tapcon hex head screw work in hollow block or only solid concrete?
Concrete, brick, and block are all listed base materials. In hollow block, land the screw in the solid web or a mortar joint rather than a cell face shell, and keep the 1 inch minimum embedment. Published pull-out and shear figures were taken in 2000 PSI concrete, so treat block capacity as lower than those numbers.
9) Are Tapcon concrete screws made in the USA for a Buy American spec job?
Country of origin is the United States, made from US or Canadian steel. That's the line institutional and government procurement usually needs for domestic-content language on a submittal.
10) What sizes does the Tapcon hex washer head concrete screw come in?
Two diameters. The 3/16 inch runs 1-1/4, 1-3/4, 2-1/4, 2-3/4 and 3-1/4 inch lengths. The 1/4 inch runs 1-1/4, 1-3/4, 2-1/4, 2-3/4, 3-1/4, 3-3/4, 4, 5 and 6 inch. Every size ships 100 per box. If you need length past 3-1/4 inches, you're in the 1/4 inch diameter.
11) How deep do I drill the hole for a Tapcon screw?
Drill deeper than your intended embedment so dust has somewhere to go. Minimum embedment is 1 inch on every size here, so at a bare minimum the hole goes 1 inch past the back of the material you're fastening, plus extra depth for cuttings. A hole drilled only to embedment depth packs with dust and the screw will strip or stop short.
How fast can I get the Tapcon CSH14114;T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Tapcon CSH14114;T come with a warranty?
Absolutely. The Tapcon CSH14114;T is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Tapcon CSH14114;T?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Tapcon CSH14114;T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.