TayMac Die Cast Metal Flat Bla...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2.10
TayMac Die Cast Metal Flat Blank Wallplate Cover, Powder Coated Finish

TayMac Die Cast Metal Flat Blank Wallplate Cover, Powder Coated Finish

(No reviews yet) Write a Review

Model: RACOBC100S

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2.10
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

RACO BC100S Die Cast Metal 1-Gang Flat Blank Wallplate Cover, Powder Coated Finish

The RACO BC100S is a 1-Gang flat blank wallplate cover designed to close off unused single-gang electrical boxes with a clean, finished appearance. Built from durable die-cast metal and finished with a powder coated surface, this blank cover gives electricians and contractors a sturdy, long-lasting way to cap wiring boxes that are not currently in service. The flat, device-free design has no cutouts or openings, so it fully seals the box opening while presenting a smooth, professional surface on the wall. This RACO cover plate is a straightforward, code-friendly solution for finishing out any location where a switch, receptacle, or other device has been removed or was never installed. Whether used during rough-in, renovation, or as a permanent closure for a discontinued device location, the BC100S delivers dependable coverage backed by RACO's quality die-cast construction.

Key Features

  • Gang Configuration: 1-Gang design sized to fit standard single-gang electrical boxes for a precise, secure fit.
  • Durable Construction: Solid die-cast metal body resists impact and everyday wear, providing long-term durability in demanding environments.
  • Blank Design: Flat, device-free cover fully closes an unused box opening with no switch or receptacle cutouts.
  • Low-Profile Fit: Flat, streamlined profile sits flush against the wall surface for a clean, finished appearance.
  • Finish: Powder coated finish resists chipping and wear while maintaining a consistent, durable appearance over time.
  • Metal Build: Die-cast metal construction offers added strength and rigidity compared to lightweight cover alternatives.
  • Versatile Use: Suitable for capping any standard single-gang box location where a device is not required.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Capping Unused Single-Gang Electrical Boxes
  • Residential and Commercial Electrical Installations
  • Renovation and Remodel Wiring Projects
  • Junction Box and Device Box Closures
  • New Construction Electrical Rough-In and Finish Work
  • Discontinued Switch or Receptacle Locations

Why RACO?

RACO manufactures the BC100S from solid die-cast metal and applies a powder coated finish to deliver dependable, code-friendly performance on the jobsite. Electrical professionals turn to RACO electrical box covers for their consistent fit, sturdy metal construction, and clean, finished appearance on every installation, making the BC100S a practical choice whenever a single-gang box needs to be reliably closed off. Choosing a RACO cover plate means specifying a component built for consistent quality and fit across every box in a project, simplifying inventory and installation for busy crews.

Manufacturer Resources

Product Specs

list_batch:
RACO-20260916
Product Type:
Blank Wallplate
Department:
Electrical
Product Subgroup:
Wallplates
Product Group:
Wiring Devices

TAYMAC RACOBC100S – Frequently Asked Questions

1) Does the TayMac blank wallplate come in a 2-gang size, or only single gang?
Both. The die cast blank cover is sold as BC100S for a standard 1-gang box and BC200S for a 2-gang box. Same flat, device-free plate either way, just sized to the box opening.
2) I pulled an old switch out and need to close off the box - will a BC100S blank plate work for that?
That's exactly what it's for. The BC100S is a flat blank with no switch or receptacle cutouts, so it fully closes a single-gang box where a device was removed or never installed. Works as a permanent closure on a discontinued device location or as a temporary cap during rough-in. Note the conductors in the box still need to be capped and the box must stay accessible.
3) I have a 3-gang box that needs to be blanked off - will the TayMac BC200S work?
No. The TayMac die cast blanks come in 1-gang (BC100S) and 2-gang (BC200S) sizes only, and a blank plate has to match the gang count of the box to close it properly. For a 3-gang or 4-gang opening, the Mulberry 97151 box mount blank in 430 stainless steel is offered in 1 through 4 gang and will cover that opening.
4) What is the closest equivalent to the TayMac BC200S 2-gang blank wallplate from another brand?
For a 2-gang blank cover, the Leviton PJ23-E is the nearest peer: it is a 2-gang blank wallplate in commercial grade, built from thermoplastic nylon and box mounted in a midway size. The main difference is material and profile - the BC200S is a flat die cast metal plate with a powder coated finish, while the PJ23-E is nylon in a midway (oversized) footprint. If the opening needs metal rigidity, stay with the BC200S; if a nonmetallic plate is preferred and the slightly larger midway coverage helps hide a rough cut, the Leviton covers that.
5) I need a blank cover in stainless steel instead of powder coated metal - what should I use?
The Mulberry 97151 is the stainless option. It is a box mount blank wallplate in 430 stainless steel, offered in 1 through 4 gang. The TayMac BC100S and BC200S are die cast metal with a powder coated finish in 1-gang and 2-gang only, so if you are standardizing on bare stainless for washdown areas, kitchens, or a specification that calls out 430 stainless, the Mulberry is the one that matches that callout - and it also covers 3-gang and 4-gang openings the TayMac blanks do not.
6) What other metal blank wallplates could I use instead of the TayMac die cast plate?
Two metal alternatives: the Mulberry 97151 is a box mount blank in 430 stainless steel, offered 1 through 4 gang, which is the usual pick where you want a bare stainless look or more than two gangs. The Pass & Seymour WPB Series blank comes in brushed aluminum. The TayMac die cast plate differs in being powder coated rather than bare metal, so the finish is painted on.
7) We're standardizing covers across a building - can I use the same TayMac blank on both single and double boxes?
Yes, and that's the usual reason to spec it. The BC100S and BC200S share the same die cast body and powder coated finish, so single and two-gang blanks match visually across every opening in the facility. Order by gang count per box and the finish stays consistent.
8) Do I need a metal blank plate, or will a plastic one do the job?
Both styles are made for the same purpose - closing an unused box opening with no device cutouts. The Leviton PJ23-E is a thermoplastic nylon commercial grade blank, while the TayMac BC100S and BC200S are die cast metal with a powder coated finish, which adds strength and rigidity compared with lightweight cover alternatives. In high-traffic corridors, mechanical rooms, or anywhere a plate takes knocks from carts and equipment, the die cast TayMac is the more impact-resistant choice; for a nonmetallic plate on a finished interior wall, the nylon Leviton is built for commercial service.
9) What blank plate matches a brushed aluminum trim package?
The Pass & Seymour WPB Series blank wallplate is finished in brushed aluminum, so it blends with brushed aluminum or brushed nickel device trim without painting. The TayMac BC100S and BC200S are powder coated die cast metal, which gives a solid painted surface rather than a brushed metallic look. Pick the WPB Series when the blanks have to visually match brushed metal plates already on adjacent openings, and the TayMac blanks when you want a painted metal finish.
10) Is a midway blank plate the same thing as a standard blank plate?
They are not interchangeable in appearance. The Leviton PJ23-E is a midway size 2-gang blank, meaning the plate is larger than standard to cover a wider margin around the box. The TayMac BC200S is a flat standard-profile 2-gang die cast blank. Both close a 2-gang box, but if the other plates on the wall are standard size, a midway blank will read as oversized; if the drywall cut around the box is ragged, the midway dimension is what hides it.
11) Will this blank plate sit flush, or does it stick out off the wall?
It's a flat, low-profile plate meant to sit flush against the finished wall surface. There is no raised dome or device hump, since there's nothing under it, so you get a smooth face across the opening.
How fast can I get the TAYMAC RACOBC100S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the TAYMAC RACOBC100S come with a warranty?
Absolutely. The TAYMAC RACOBC100S is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the TAYMAC RACOBC100S?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the TAYMAC RACOBC100S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!