Tell DB3060 - Grade 3 Single Cylinder Deadbolt

Both. The DB3060 covers a door thickness range of 1-3/8 inch to 1-3/4 inch, so it works on older interior and residential entry doors as well as standard 1-3/4 inch slabs. That range is handled without a separate spacer kit.

No. The DB3060 ships with an adjustable backset that sets to either 2-3/8 or 2-3/4 inches, which are the two backsets you will find on virtually every bored door prep. Set it on site to match the existing cross bore.

In most cases yes. The DB3060 uses a 1 inch housing diameter with a 1 x 2-1/4 inch square corner faceplate, and it comes with a 1-1/8 x 2-3/4 inch standard strike. If the old bolt had a square corner faceplate of the same size and the frame is prepped for a 1-1/8 x 2-3/4 strike, it swaps in. A door prepped for a drive-in (no faceplate) bolt or a radius corner faceplate will need the mortise re-cut.

The DB3060 uses a conventional cylinder cut to the Schlage C keyway, so it takes SC1 blanks and can be keyed to an existing Schlage C system. You choose keyed different or keyed alike when ordering, and a key code field is available if you need it cut to a specific bitting. There is also a less-cylinder option if your locksmith is supplying the cylinder.

Grade 3 is the residential duty level, and the DB3060 is classified as residential. For unit entry doors in multi-family it is a common fit. For a main building entrance, a leasing office, or any high-traffic commercial opening, step up: Hager's 3215 is a Grade 2 commercial deadbolt with a 1 inch throw on the same Schlage C keyway, and the Cal-Royal CRB800 is a Grade 1 heavy duty single cylinder deadbolt.

The Tell DB3060 is a Grade 3 single cylinder deadbolt with a cylinder x thumbturn function, an adjustable 2-3/8 to 2-3/4 inch backset, and a 1-3/8 to 1-3/4 inch door thickness range. The Cal-Royal ED500 matches that profile closely: it is also a Grade 3 single cylinder deadbolt with cylinder x thumbturn function, adjustable backset, and the same 1-3/8 to 1-3/4 inch door thickness range. The Callan Model 200S is another Grade 3 cylinder x thumbturn deadbolt, offered with square trim.

The Tell DB3060 is a Grade 3 deadbolt designated for residential use. For a higher ANSI/BHMA grade in the same cylinder x thumbturn function, the Accentra D111 is Grade 1 with a 2-3/8 inch backset and a 1-3/8 to 1-3/4 inch door thickness range, and the Dexter DB1000 single cylinder deadbolt is Grade 1 covering 1-3/8 to 1-7/8 inch doors. The Falcon D111 is a Grade 1 heavy duty deadbolt with adjustable backset. At Grade 2, the Dexter DB2000 single cylinder deadbolt covers the same 1-3/8 to 1-3/4 inch door range as the DB3060.

The Tell DB3060 is a single cylinder deadbolt, keyed on the outside with a thumbturn inside. Where a keyed cylinder on the exterior face is not wanted, the Arrow E60 is a Grade 2 non-keyed exit deadlock with a blank plate on one side and a thumbturn on the other, covering 1-3/8 to 1-3/4 inch doors - the same door range the DB3060 fits. For a one-sided application, the Callan Model 205S is a Grade 3 one-sided half-bore deadbolt.

The Tell DB3060 uses a Schlage C keyway with a conventional cylinder. The Hager 3115 is a Grade 2 cylinder x thumbturn deadbolt with a Schlage C keyway and the same 1-3/8 to 1-3/4 inch door thickness range, and the Hager 3118 is a Grade 1 classroom deadbolt with a Schlage C keyway and a 6-pin cylinder over that same door range. For keyed-both-sides, the Hager 3214 is a Grade 2 double cylinder deadbolt in Schlage C. Any of these can be brought onto a common key system with the DB3060 by a locksmith.

The Tell DB3060 is a Grade 3 deadbolt designated for residential use. Where a fire rating is called for on the drawing, the Hager 3215 single cylinder deadbolt is a Grade 2 commercial lock with a 1 inch throw and a fire rating, covering 1-3/8 to 1-3/4 inch doors, and the Cal-Royal CRB800 is a Grade 1 heavy duty single cylinder deadbolt with a UL 3-hour fire rated latch. Both keep the cylinder x thumbturn function the DB3060 provides.

The Tell DB3060 fits doors 1-3/8 to 1-3/4 inches thick. For thicker stock, the Deltana 7312KA2 Grade 3 deadbolt covers 1-3/8 to 2 inch doors, the Dexter DB1000 Grade 1 deadbolts cover 1-3/8 to 1-7/8 inches, and the Corbin Russwin DL3011 Grade 1 cylindrical deadlock covers 1-3/4 to 2-1/4 inch doors.

Cylinder outside, thumbturn inside. That means no key is needed to get out, which matters on any door in an egress path. If you specifically want key operation on both faces (glass-adjacent doors, for instance), look at a double cylinder model such as the Callan 210S or the Delaney LU Series, and check your local egress code first.

Two finishes: 619 satin nickel and 630 satin stainless steel. 630 is the usual match for satin stainless lever and closer hardware in commercial corridors, while 619 pairs with satin nickel residential trim. Both are brushed silver tones but they are not identical, so pick the one your existing lockset carries rather than mixing.

Yes. Keyed alike is one of the keying selections, so a run of DB3060 bolts can be supplied on a single key, which is what most landlords want for common doors or a maintenance key. Keyed different is the other option for individual unit entries, and you can supply a specific key code if you are extending an existing Schlage C system.

The DB3060 is specified as a single cylinder deadbolt, cylinder x thumbturn. For a keyed-both-sides opening, the Callan Model 210S is a Grade 3 double cylinder deadbolt, and the Deltana 7312KA2 is a Grade 3 double cylinder deadbolt fitting 1-3/8 to 2 inch doors. At Grade 2, the Delaney LU Series double cylinder deadbolt comes in US32D stainless steel and the Dexter DB2000 double cylinder covers 1-3/8 to 1-3/4 inch doors. Keyed-both-sides deadbolts are restricted by code on many egress doors, so confirm the requirement for the facility type before specifying one.

The Tell DB3060 is a Grade 3 cylinder x thumbturn deadbolt fitting 1-3/8 to 1-3/4 inch doors. For openings where thumbturn operation matters, the Cal-Royal LSD is also a Grade 3 single cylinder cylinder x thumbturn deadbolt over the same 1-3/8 to 1-3/4 inch door range but uses an ADA ergonomic thumbturn.

The Tell DB3060 carries a conventional cylinder in the Schlage C keyway. If a facility standardizes on small format interchangeable cores, the Arrow E61 is a Grade 2 single cylinder deadlock prepped for SFIC and supplied less core, fitting 1-3/8 to 1-3/4 inch doors like the DB3060. The Deltana CL200LAIC is a Grade 2 single deadbolt built for an interchangeable core with a 2-3/4 inch backset, and the Delaney LM Series is a Grade 1 single cylinder less core deadbolt in dull chrome US26D.

The Tell DB3060 is offered in 619 satin nickel and 630 satin stainless steel with a round 1 inch housing and a 1 by 2-1/4 inch square corner faceplate. For different trim styling in a comparable single cylinder deadbolt, the Bravura 310SC Elite is a Grade 2 contemporary square deadbolt and the 310RC Elite is a Grade 2 contemporary round, both cylinder x thumbturn. The Brinks Mendocino E2402 is a contemporary square single cylinder deadbolt with a 4-way adjustable backset, and the Callan 200S offers square trim at Grade 3.

The Tell DB3060 is a mechanical keyed deadbolt with a Schlage C cylinder and thumbturn. For coded or credential access in the same deadbolt role, the Delaney KP400 is a Grade 2 electronic deadbolt with a programmable remote, the Codelocks CL2200 is a medium duty electronic surface deadbolt in brushed steel, and the Codelocks CL200 is a light duty surface deadbolt with key override. For multihousing RFID, the Dormakaba Nova-D is a smart electronic deadbolt.

The Tell DB3060 is a single cylinder deadbolt, cylinder outside and thumbturn inside, so the bolt can always be retracted from the inside by hand. The Falcon D211 is a Grade 2 classroom function deadbolt with single cylinder operation, medium duty, and the Falcon D111 is the Grade 1 heavy duty classroom version with adjustable backset. Corbin Russwin DL2211 and DL3211 are Grade 1 cylindrical deadlocks configured cylinder x blank, with no inside thumbturn at all. Confirm which side needs key-only control before substituting.

The Tell DB3060 is a Grade 3 single cylinder deadbolt with a 1 inch housing diameter and a conventional Schlage C cylinder. Where the exterior cylinder needs hardening, the Cal-Royal CB160 is a Grade 2 single cylinder deadbolt with a tamper-resistant cylinder guard, keeping the same cylinder x thumbturn function.

The Tell DB3060 has an adjustable 2-3/8 to 2-3/4 inch backset, so it covers a 2-3/4 inch bore directly. If a fixed-backset unit is preferred, the Deltana CL200LA is a Grade 2 single deadbolt built for a 2-3/4 inch backset, and the Accentra D111 is a Grade 1 single cylinder deadbolt with a 2-3/8 inch backset for openings bored at that dimension.