IDEAL Industries 89-504 Termin...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$86.46
$43.66
IDEAL Industries 89-504 Terminal Strip, 4-Pole, 22-6 AWG

IDEAL Industries 89-504 Terminal Strip, 4-Pole, 22-6 AWG

(No reviews yet) Write a Review

Model: 89-504
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$86.46
$43.66
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Terminal Strip, 4-Pole, 22-6 AWG

  • Features

    • UL Recognized (E82048) and CSA Certified (LR15364)
    • Accepts wire sizes from 6 through 22 AWG Cu
    • #10-32 Philslot, nickel-plated brass terminal screws
    • Heavy-duty, corrosion-resistant screws, surface plates and optional hardware
    • Operating temperature rated from 130° C (260° F) to -40° C (-40° F)
    • Rugged polyester thermoplastic base (UL Rated 94V-0)
    • Available in standard or shorting block styles
    • .625 in. (15.88mm) center spacing


89-504 - spec sheet

Manufacturer Resources

Product Specs

Product Group:
Outlets
Department:
Electrical
Product Subgroup:
Switches & Receptacles
Recommended Torque:
20 in. - lb
parent sku:
IDL-89-504

Ideal Industries 89-504 – Frequently Asked Questions

1) What wire sizes can I land on the IDEAL 89-504 terminal strip?
The 89-504 accepts copper conductors from 22 AWG up to 6 AWG, so you can mix control wiring and feeder-size conductors on the same four-pole strip. Terminals are #10-32 Philslot screws in nickel-plated brass.
2) How tight should the screws be torqued on the IDEAL 89-504 terminal block?
Torque the terminal screws to 20 inch-pounds. That figure applies across the range the block takes, 22 through 6 AWG copper, and matters most on the larger conductors where an under-torqued screw heats up under load.
3) Will the 89-504 hold up in a hot mechanical room or an unheated outdoor cabinet?
Operating range runs from 130 C (260 F) down to -40 C (-40 F), so rooftop units, boiler rooms and unheated exterior control cabinets are all inside the rating. Screws, surface plates and optional hardware are corrosion resistant.
4) Should I order a standard terminal strip or a shorting block?
Both styles exist in this IDEAL family. A standard strip like the 89-504 keeps each of the four poles electrically isolated, which is what you want for separate circuits or individual control legs. A shorting block ties poles together, used where you need a common bus, for instance a shared neutral or a ground collection point. Pick standard unless your drawing calls for the poles commoned.
5) Can I use the IDEAL 89-504 for both line-voltage and low-voltage control wiring in the same enclosure?
The block itself takes anything from 22 AWG thermostat and control wire through 6 AWG, so mechanically it handles either. Whether you can run both in one enclosure is a code separation question for your installation, not a limit of the strip. For mixed work, most panel builders use separate strips so the torque spec and wire size stay consistent per block.
6) What is the exact part number to order for the four-pole IDEAL barrier terminal strip?
Order IDEAL Industries 89-504. That is the manufacturer part number for the 4-pole version rated 22-6 AWG with #10-32 terminal screws.
How fast can I get the Ideal Industries 89-504 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries 89-504 come with a warranty?
Absolutely. The Ideal Industries 89-504 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries 89-504?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries 89-504 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!