Test Kit with Multimeter, Non-Contact Volt Tester, Receptacle Tester
69149P - spec sheet
Warnings
- Do not attempt to measure resistance or continuity on live circuits.
- Do not use equipment during electrical storms or in wet weather, and do not use if equipment appears to be damaged.
- Read, understand and follow all instructions, cautions and warnings attached to and /or packed with all test and measurement devices before each use.
- Before each use verify meter operation by measuring a known voltage or current.
Features
- Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2MOhms resistance
- Receptacle tester Cat. No. RT105 detects wiring configurations and indicates correct wiring, and identifies common wiring faults
- MM300 multimeter tests continuity with visual and audible continuity indicators
- NCVT1P has a high intensity, bright red LED that illuminates and an audible tone when voltage is detected from 50 to 1000 VAC power operating range
- MM300: Low Battery Indicator; NCVT-1P: Pocket Clip
- Non-Contact Voltage Tester Cat. No. NCVT1P has a bright green LED to indicate the tester is working; it changes to red and audible tones sound when voltage is detected
- Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
- Test leads included for Cat. No. MM300; batteries included for Cat. Nos. NCVT1P and MM300
69149P - spec sheet
Manufacturer Resources
Product Specs
- Batteries:
- MM300 - 2 x AAA; NCVT-1P - 2 x AAA
- Depth:
- 3.5000 in
- Height:
- 6.0000 in
- Material:
- Polymer Body and Electronic Components
- Overall Height:
- 1.78" (4.5 cm)
- Overall Length:
- 6" (15.2 cm)
- Overall Width:
- 3.16" (8 cm)
- Standard:
- MM300: CAT III 600V; NCVT1P: CAT IV 1000V
- Type:
- Electrical Test Kit
- Weight:
- 8.2 oz (231 g)
- Width:
- 0.9000 in