Metallics TRS87 Thread Rod 3/8...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$81.10
$42.43

Metallics TRS87 Thread Rod 3/8-16 x 7" St-zn (Piece 1)

(No reviews yet) Write a Review

Model: TRS87
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$81.10
$42.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Thread Rod 3/8-16 x 7" St-zn (Piece 1)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Pack Type:
Bundle
Sub Division:
Electrical-E H2
Department:
Electrical

Metallics TRS87 – Frequently Asked Questions

1) Is a 7 inch threaded rod long enough to hang conduit or strut from a concrete deck?
Seven inches of 3/8-16 rod suits short drops only, the kind you get hanging strut, conduit clamps or a small junction box tight to a deck or joist. Once you account for the thread taken up by the anchor or insert at the top and the nut and washer at the bottom, usable drop is a few inches less than the full 7. For longer drops you either order a longer cut length or join two pieces with a 3/8-16 coupling nut.
2) Can a zinc plated threaded rod like the TRS87 be used outdoors or in a wet location?
Zinc plating on the TRS87 is a general indoor corrosion coating, fine for dry interior electrical and mechanical hanging. For exterior, damp, corrosive or washdown environments, specify stainless or hot dip galvanized rod instead, since cut ends and thread crests on plated steel rod are where rust starts first.
3) What hardware do I need to order with 3/8-16 threaded rod to complete a hanger assembly?
The TRS87 is bare rod only. A complete drop also needs an attachment at the top (a 3/8 inch drop-in anchor, wedge anchor, beam clamp or concrete insert) and, at the bottom, 3/8-16 hex nuts with flat washers, or a strut nut if you are landing on channel. All of it has to be 3/8-16 to match the rod thread.
4) Is the Metallics TRS87 rod sold as one piece or in a bundle?
The TRS87 is one piece of pre-cut rod, and it is packed as a bundle, so expect the rods banded together rather than individually bagged. If you are standardizing a job on one drop length, ordering the pre-cut 7 inch pieces saves cutting and re-chasing threads on site.
How fast can I get the Metallics TRS87 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TRS87 come with a warranty?
Absolutely. The Metallics TRS87 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TRS87?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TRS87 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.