Klein Tools 80006 Tool Kit, 6-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$212.33
$124.99
Klein Tools 80006 Tool Kit, 6-Piece

Klein Tools 80006 Tool Kit, 6-Piece

(No reviews yet) Write a Review

Model: 80006
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$212.33
$124.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Tool Kit, 6-Piece

  • Warnings

    • The tool belt provided in this kit is NOT an occupational protective belt.
    • Always wear approved eye protection.
    • Do NOT use screwdrivers to pry or chisel.
    • NOT for fall arrest or back support.
    • NOT insulated. Do NOT use these tools on or near live electrical circuits.

  • Features

    • Made in USA
    • #2 Phillips-Tip Screwdriver, 4-Inch (10.2 cm) round shank (603-4), 1/4-Inch(6.4 mm) Cabinet Tip Screwdriver 4-Inch (10.2 cm) Shank (Cat. No. 605-4)
    • 4-Pocket Leather Tool Pouch, riveted for extra durability (Cat. No. 5119)
    • Includes - Heavy Duty Side Cutting Pliers (Cat. No. D2000-9NE) and Klein-Kurve® Wire Stripper (Cat. No. 11055)
    • 6-Piece tool set contains one side cutting pliers, one Klein Kurve® Wire Stripper, one Phillips-Tip Screwdriver, one Cabinet-Tip Screwdriver, one 4-pocket leather pouch, and a lightweight utility belt
    • Lightweight Utility Belt (Cat. No. 5204)
    • Klein Tools Trim-Out Tool Kit is a quick, portable solution for electricians on the go!


80006 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Item Depth In:
11.6
Item Height In:
2.9
Item Weight Lbs:
2.75
Item Width In:
6.8
Number Of Pieces:
6
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Tool Kits
Product Type:
Trim-Out Tool Kit
Product Details:
Trim-Out Tool Kit
Product Weight:
2.8 lb (1.3 kg)

Klein Tools 80006 – Frequently Asked Questions

1) Can the screwdrivers and pliers in the Klein 80006 kit be used on live circuits?
No. The tools in the 80006 kit are not insulated and must not be used on or near live electrical circuits. If you need to work energized, you need separately rated 1000V insulated tools. Also, don't use the screwdrivers to pry or chisel, and wear approved eye protection.
2) Is the belt in the Klein 80006 kit safe to use for climbing or as a back support?
No. The 5204 belt included is a lightweight utility belt for carrying the pouch and tools only. It is not an occupational protective belt, not for fall arrest, and not a back support. Anyone working at height needs a separate rated harness and positioning belt.
3) Can I buy the pouch or belt from the Klein 80006 kit separately if one wears out?
The parts carry their own Klein catalog numbers, so a replacement is ordered by that number rather than by the kit: 5119 for the 4-pocket leather pouch, 5204 for the lightweight utility belt, 603-4 and 605-4 for the screwdrivers, D2000-9NE for the side cutting pliers, and 11055 for the Klein-Kurve wire stripper. Useful for an MRO stockroom standardizing replacements across a crew.
4) Is this Klein kit enough for trim-out and device work, or do I need more tools?
The 80006 is built as a trim-out kit: pliers, stripper, and two screwdrivers cover setting devices, making up boxes, and trimming out receptacles and switches. It does not include a voltage tester, tape measure, nut drivers, or a level, so a tech doing rough-in or troubleshooting will carry those separately. As a grab-and-go belt setup for finish work it is complete on its own.
5) What screwdriver tips and shank lengths are in the Klein 80006 kit?
Two short drivers: a #2 Phillips with a 4-inch (10.2 cm) round shank, Cat. No. 603-4, and a 1/4-inch (6.4 mm) cabinet-tip slotted driver on a 4-inch (10.2 cm) shank, Cat. No. 605-4. The 4-inch shanks are the stubby length that works inside a box or panel where a full-length driver won't clear. The 1/4-inch cabinet tip is the parallel-sided slotted tip for terminal screws recessed in a counterbore.
6) How heavy is the Klein 80006 kit on the belt all day?
The whole kit weighs 2.8 lb (1.3 kg), so a worn setup is light enough for a full shift of finish work. Packed, it measures 11.6 by 6.8 by 2.9 inches, which fits a van bin or gang box without taking much room.
7) Is the pouch in the Klein 80006 leather or nylon, and how many pockets?
Leather, riveted construction, with 4 pockets, Cat. No. 5119. Leather holds its shape and resists tear-out at the pocket mouths better than fabric when you are dropping pliers in and out all day.
8) Are the tools in the Klein 80006 kit made in the USA?
Yes, the 80006 kit is listed as Made in USA.
How fast can I get the Klein Tools 80006 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 80006 come with a warranty?
Absolutely. The Klein Tools 80006 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 80006?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 80006 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!