Klein Tools 5481 Tool Pouch, Leather Pocket Tool Organizer, 6-Pockets, 5.75x2.5x10-Inch

Yes. The 5481 attaches with a snap loop sized for belts up to 2 inches (5.1 cm) wide, so a standard 2-inch electrician's or tool belt works. The snap loop also means you can pull it off the belt without unthreading anything, and the pouch is small enough to drop into a back pocket when you don't want to wear a belt at all.

It measures 5.75 x 2.5 x 10 inches and carries six pockets, including a scissors pocket on the back flap. That is a hand-tool carrier, not a bag: pliers, screwdrivers, a tester, a tape and snips. At 0.47 lbs empty it adds almost nothing to the belt.

Leather, stitched and riveted at the stress points. Rivets are what keep the seams from pulling open when sharp-tipped tools load one pocket, which is why leather pouches like this outlast nylon on daily service work. Nylon is lighter and cheaper; leather takes the abrasion better.

The 5481 is a single pouch for the tools you reach for constantly, worn on a belt you already own or carried loose in a back pocket. If you need to haul a full kit including a drill, conduit tools and a larger fastener assortment, you want a tool belt rig or a bucket bag instead. A property maintenance tech or a service electrician doing trim-out and troubleshooting is the buyer this size suits.

No belt is included. The 5481 is the pouch only, with a snap loop that goes onto a belt up to 2 inches wide, so you supply the belt or wear it on the one you already have. For crews standardizing, that means you can add these to existing belts without replacing the whole rig.

Klein Tools 5481. That is the manufacturer part number to quote or reorder against, and it is a single configuration, so there are no finish, size or hand options to specify.