Topaz Lighting 1551HDG Right A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2.59
Topaz Lighting 1551HDG Right Angle Conduit Support, Hot-Dip Galvanized Steel

Topaz Lighting 1551HDG Right Angle Conduit Support, Hot-Dip Galvanized Steel

(No reviews yet) Write a Review

Model: 1551HDG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Topaz Lighting Right Angle Conduit Support, Hot-Dip Galvanized Steel

The Topaz Lighting Right Angle Conduit Support is a heavy-duty hot-dip galvanized steel hardware solution engineered to secure and route conduit at a 90° angle in commercial and industrial electrical installations. Constructed from galvanized steel for outstanding corrosion resistance and long-term mechanical strength, this conduit support is available across trade sizes from 1/2" through 3" (1/2", 3/4", 1", 1-1/2", 2", 3") to accommodate standard conduit runs where a right-angle directional change or wall/structure mounting is required.

Key Features

  • Trade Size Range: Available in 1/2", 3/4", 1", 1-1/2", 2", and 3" trade sizes for secure right-angle support across standard raceway diameters.
  • Durable Construction: Manufactured from galvanized steel, providing exceptional strength and resistance to mechanical stress in tough installation environments.
  • Hot-Dip Galvanized Finish: Hot-dip galvanized coating delivers superior corrosion protection compared to standard zinc plating, extending service life in harsh or outdoor-adjacent conditions.
  • 90° Right Angle Configuration: Designed specifically for right-angle conduit support applications, enabling clean, code-compliant conduit routing along walls, ceilings, and structural members.
  • Reliable Hardware: Galvanized steel hardware construction ensures consistent performance and dimensional stability throughout the installation lifecycle.

Technical Specifications

  • Angle: 90°
  • Trade Size Range: 1/2" - 3"

Typical Applications

  • Commercial and Industrial Conduit Raceway Systems
  • Right-Angle Conduit Routing Along Walls and Structural Members
  • New Construction and Renovation Electrical Installations
  • Conduit Support and Fastening in Manufacturing and Utility Facilities
  • Exposed Conduit Runs Requiring Secure Mechanical Support

Why Topaz Lighting?

Topaz Lighting's Right Angle Conduit Support is built from hot-dip galvanized steel, a construction standard that ensures robust corrosion resistance and long-lasting mechanical integrity across the full 1/2" to 3" size range. The hot-dip galvanizing process provides a thicker, more durable protective coating than conventional zinc plating, making this support a reliable choice for electricians and contractors who demand code-compliant, dependable hardware for right-angle conduit routing. Trust Topaz Lighting for quality electrical support products that stand up to the rigors of commercial and industrial environments.

Product Specs

Product Type:
Conduit Support
Angle:
90°
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Straps & Supports
Product Material:
Galvanized Steel
Product Color:
Hot-Dip Galvanized
Product Finish:
Hot-Dip Galvanized
Product Size:
1/2" - 3"

Topaz Lighting 1551HDG – Frequently Asked Questions

1) Can I use this Topaz conduit support outdoors or in a wet industrial area?
Hot-dip galvanized is the finish on this Topaz right angle support, and that coating is thicker than standard zinc plating, which is why it holds up in harsh and outdoor-adjacent conditions such as manufacturing and utility facilities. The body is galvanized steel throughout, not plated sheet with bare edges. For fully submerged or heavy chemical exposure, stainless would be the material to specify instead.
2) What is a right angle conduit support actually for, and when would I use a strap instead?
A right angle support holds conduit at a 90 degree relationship to the mounting surface, so it is what you reach for when the run turns or when you are standing conduit off a wall, ceiling, or structural member. A plain one-hole or two-hole strap only clamps conduit flat against the surface it is fastened to. If your run is straight and lies on the surface, use a strap. If the run changes direction or has to be supported off a perpendicular face, this is the part.
3) Will the Topaz 1551HDG support EMT, rigid, and IMC conduit?
The Topaz supports are sized by conduit trade size, 1/2 inch through 3 inch, not by raceway type. Trade size is common across EMT, IMC, and rigid, but the actual outside diameter is not the same between them, so match the support to the outside diameter of the raceway you are running rather than assuming the trade size alone settles it. For a galvanized rigid run, the hot-dip galvanized finish here is the matching corrosion class.
4) I'm standardizing conduit supports across a plant. Can I order the whole size range in the same finish?
Yes. All six Topaz right angle supports, 1/2 inch through 3 inch, are the same hot-dip galvanized steel construction, so a facility can carry one finish standard across every raceway diameter in the run. The part numbers follow a straight sequence: 1551HDG, 1552HDG, 1553HDG, 1555HDG, 1556HDG, 1558HDG, with HDG denoting the hot-dip galvanized version.
5) Do I need to order mounting fasteners separately for the Topaz right angle conduit support?
Anchors and fasteners are selected for the substrate you are mounting to, concrete, steel, or wood, and are ordered separately from the support itself. The support is the galvanized steel bracket that holds the conduit; pick the anchor to match the wall or structural member and, in a corrosive or exterior location, keep the fastener in a compatible galvanized or stainless finish so you are not pairing dissimilar metals against a hot-dip coating.
6) How do I tell the hot-dip galvanized Topaz support from the plain zinc version when ordering?
Look for the HDG suffix on the catalog number. The hot-dip galvanized parts run 1551HDG, 1552HDG, 1553HDG, 1555HDG, 1556HDG, and 1558HDG. The base number alone identifies the size, the HDG identifies the heavier corrosion coating, which is the one to spec for exposed exterior-adjacent or industrial runs.
How fast can I get the Topaz Lighting 1551HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Topaz Lighting 1551HDG come with a warranty?
Absolutely. The Topaz Lighting 1551HDG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Topaz Lighting 1551HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Topaz Lighting 1551HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!