TownSteel CRX-A-41 Single Dumm...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$377.95
TownSteel TownSteel CRX-A-41 Single Dummy - Stainless Steel Heavy Duty Ligature Resistant Arch Trim Cylindrical Lockset TWS-CRX-A-41

TownSteel CRX-A-41 Single Dummy - Stainless Steel Heavy Duty Ligature Resistant Arch Trim Cylindrical Lockset

(No reviews yet) Write a Review

Model: CRX-A-41-630-LH
$377.95

In Stock (leaves warehouse same day if ordered before 3pm ET)

$377.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

CRX-A

ANSI Grade 1 Cylindrical Lock with Ligature Resistant Trim-Arch

Description

The CRX-A is an ANSI Grade 1 Cylindrical Lock with Ligature Resistant Trim-Arch. CRX-A is recommended for high-risk areas in facilities housing patients at risk. This product is equipped with a 5-point ligature-resistant stainless steel arch trim and tamper-resistant mounting screws. The CRX-A can be mounted on both a wood and metal door.

Features:

  • Equipped with a 5 point ligature resistant arch trim
  • Meets all ligature resistant requirements
  • Heavy-duty Grade 1
  • Various cylinder and keying options
  • Through-bolt mounting with tamper-resistant screws

 

 

RESOURCES

Product Specs

Series:
CRX-A Series
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Product Type:
Knobs and Levers
Subcategory:
Cylindrical Locks
Commercial/Residential:
Commercial
Lock Type:
Cylindrical
Keyed Function:
Non-Keyed
Duty Level:
Heavy Duty
Grade:
Grade 1
Product Function:
Single Dummy
Door Thickness Range:
1-3/4"
Face Plate:
1-1/8"
Door Strike:
1-1/4" x 4-7/8", ASA Strike
Product Category:
Mechanical Locks
Department:
Door Hardware

TownSteel CRX-A-41-630-LH – Frequently Asked Questions

1) Does the TownSteel CRX-A-41 single dummy actually latch, or is it just trim?
Single dummy function, so there is no latch and no key. The CRX-A-41 is a fixed pull only: the arch trim mounts to one face of the door and does not rotate or retract anything. Use it on an inactive leaf of a pair, a closet door, or anywhere you need the ligature resistant arch profile to match adjacent openings without any locking. If you need an operating latch in this series, you need one of the keyed or non-keyed latching functions instead.
2) Why does a dummy trim like the CRX-A-41 ask for handing when I order?
The arch trim is directional, so it is built left hand, left hand reverse, right hand, or right hand reverse. All four are offered. Pick the handing that matches the active hardware on the rest of the opening so the arch sweeps the same direction; on a pair of doors that usually means matching the leaf next to it.
3) Will the TownSteel CRX-A fit a 1-3/8 inch door?
No. The CRX-A is built for 1-3/4 inch doors only, which is the standard commercial thickness. On a 1-3/8 inch leaf the through-bolts and trim will not sit correctly. If your opening is 1-3/8 inch, look at a cylindrical lock with a range that covers it, such as the Cal-Royal Barrington BA series (1-3/8 to 1-3/4 inch) or the Falcon K501, which covers 1-3/8 to 2-1/4 inch.
4) What backset do I need to prep for the TownSteel CRX-A?
2-3/4 inch standard backset, which is the usual commercial bored prep. That is the only backset offered on the CRX-A-41. If your existing doors are drilled 2-3/8 inch, that prep will not line up.
5) Is the TownSteel CRX-A suitable for a behavioral health or patient room where anti-ligature is required?
That is exactly what it is built for. The CRX-A carries a 5-point ligature resistant stainless steel arch trim and is recommended for high-risk areas in facilities housing patients at risk. The sloped arch gives nothing to tie off to, and tamper-resistant mounting screws keep the trim from being removed. Combine the dummy version on inactive leaves with the keyed functions on active doors so the whole ward reads the same.
6) I need a keyed lock on the same opening instead of a dummy trim - what Grade 1 cylindrical lock can I use?
The CRX-A-41 is a non-keyed single dummy cylindrical trim, so it has no cylinder and no latch operation at all. If the door needs a keyed entrance function, the Falcon K501 is a Grade 1 heavy duty cylindrical entrance lock with a push-turnbutton function, fire rated, and fits doors from 1-3/8 inch to 2-1/4 inch. Note the K501 is a standard lever trim and does not carry the 5-point ligature resistant arch trim the CRX-A uses for patient-risk areas.
7) The opening is a classroom or storeroom door in a behavioral health wing - is the CRX-A-41 the right part?
No. The CRX-A-41 is a single dummy, so it cannot secure a door. For a classroom function, the Cal-Royal BA03 is an ANSI F84 Grade 2 cylindrical classroom lock; for storeroom, the Cal-Royal BA05 is an ANSI F86 Grade 2 storeroom lock with a deadlocking latch. Both fit 1-3/8 inch to 1-3/4 inch doors. Neither is a ligature resistant design, so for patient-risk areas the CRX-A series trim is what addresses that requirement, in its keyed functions rather than the -41 dummy.
8) Will the CRX-A-41 work on a 1-3/8 inch door like the Barrington locks do?
No. The CRX-A-41 is specified for 1-3/4 inch doors only. If the leaf is 1-3/8 inch, the Cal-Royal Barrington BA series covers 1-3/8 inch to 1-3/4 inch, and the Falcon K501 covers 1-3/8 inch to 2-1/4 inch. Both of those are functioning locks rather than dummy trim, so confirm the function you need before swapping.
9) Can the CRX-A ligature resistant lockset go on a hollow metal door, or is it wood only?
Both. The CRX-A mounts on wood and on metal doors, and it uses through-bolt mounting with tamper-resistant screws so the trim cannot be pulled off from the room side. That through-bolt requirement is why the 1-3/4 inch thickness matters.
10) Is the CRX-A Grade 1, and how does that compare to the other cylindrical locks you carry?
The CRX-A is ANSI Grade 1 heavy duty. Among the alternatives, the Falcon K501 is also Grade 1 heavy duty, while the Cal-Royal Barrington BA line is Grade 2 (the BA03 classroom and BA05 storeroom are both listed as Grade 2). Neither of those carries ligature resistant trim, so for a patient-risk opening the CRX-A is the one doing that job.
11) What strike does the TownSteel CRX-A series use?
A 1-1/4 by 4-7/8 inch ASA strike, with a 1-1/8 inch face plate on the latch. If your frames are already prepped for ASA strikes, the latching versions of the CRX-A drop into that cutout. The CRX-A-41 dummy itself has no latch, so it needs no strike at all.
12) I need a keyed lock on the active door and matching trim on the inactive leaf. Can I mix within the CRX-A series?
Yes, that is the normal way it is specified. The CRX-A-41 is the non-keyed dummy, and the series is offered with various cylinder and keying options for the functions that actually lock. Order the keyed function for the active leaf and the -41 dummy for the inactive one, matching handing, and both openings carry the same 5-point arch trim.
13) What is the difference between the CRX-A-41 and a Cal-Royal Barrington BA00 entrance lock?
They do different jobs. The CRX-A-41 is a non-keyed single dummy - fixed trim with no latch, used on inactive leaves or pull-side-only openings, and it carries Grade 1 heavy duty ligature resistant stainless arch trim with tamper-resistant through-bolt mounting. The Cal-Royal BA00 is an entrance function cylindrical lock with turn/push button locking that fits doors 1-3/8 inch to 1-3/4 inch. If the leaf needs to latch and lock, the BA00 is the functional part; the CRX-A-41 only provides trim.
14) I need remote or access-controlled operation on this opening - what replaces the CRX-A-41?
The CRX-A-41 is mechanical dummy trim with no cylinder and no electrical provision. For remote operation on a cylindrical prep, the BEST 9KW series is a heavy duty electromechanical cylindrical lock with remote control operation. Note the 9KW is not a ligature resistant trim, so on a patient-risk opening you would be trading the CRX-A arch trim for electrified function.
15) If I want Grade 1 rather than Grade 2 on a cylindrical opening, which of these qualify?
The TownSteel CRX-A-41 is Grade 1 heavy duty, and the Falcon K501 is also Grade 1 heavy duty and fire rated. The Cal-Royal Barrington BA03 and BA05 are Grade 2 functions. Bear in mind the CRX-A-41 is a single dummy, so its Grade 1 rating applies to the trim and mounting, not to a latching function.
16) For a pair of doors between two rooms, is the CRX-A-41 or a communicating lock the right choice?
Depends on which leaf. The CRX-A-41 single dummy is the part for the inactive leaf, where you want matching trim with no latch. For the active leaf on a door between two occupied spaces, the Cal-Royal BA04 is an ANSI F80 Grade 2 communicating cylindrical lock for 1-3/8 inch to 1-3/4 inch doors. The CRX-A-41 is specified for 1-3/4 inch doors, so on a 1-3/4 inch pair both can apply to their respective leaves.
17) Is the TownSteel CRX-A a residential lock, or commercial only?
Commercial. The CRX-A is a heavy duty Grade 1 cylindrical lockset intended for institutional openings, not residential passage hardware. It is specified in healthcare, behavioral health, and correctional-type settings where the trim profile matters as much as the lock function.
How fast can I get the TownSteel CRX-A-41-630-LH delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the TownSteel CRX-A-41-630-LH come with a warranty?
Absolutely. The TownSteel CRX-A-41-630-LH is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the TownSteel CRX-A-41-630-LH?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the TownSteel CRX-A-41-630-LH from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!