You may also like
1066/1067/1068 DROP-RING FLUSH PULLS OVERVIEW
Trimco’s Hands-Free Adjustable Pulls are uniquely designed to make the world healthier, while being durable, flexible, and highly customizable. These patent pending pulls have an adjustable hands-free bend that can pivot during installation to achieve different clearances for hands-free operation. The AP330 Series Pulls come standard with adjustable standoffs for worry-free retrofit of current door pulls and easy access to lock cylinders. The AP330 hands-free pulls are available in 710 Healthy Hardware® and stainless steel. The Healthy Hardware 710CU Finish is made from bactericidal copper alloy touch surfaces that are registered with the U.S. Environmental Protection Agency (EPA), and when cleaned regularly, have been proven to kill 99.9% of infectious bacteria* like e-Coli, MRSA, Staph & VRE. It is not a coating; it’s an all-natural, solid copper-based alloy that will never wear off.
FEATURES & BENEFITS
- A series of low-profile, surface-mounted, drop-ring pulls to operate mortise locks generally from the inside of the door. Typical applications are handball courts, research facilities, adjoining rooms, etc. Ring handle is securely attached to half-spindles. Multiple spindle sizes and orientations enable mating to most mortise locks.
APPLICATIONS
- Hospitality
- Multifamily & Mixed-Use
- Office Buildings
- NOTES
- 1066/1067/1068 Order Form must accompany PO.
Add $83.00 LIST for special prep or modification.
DOWNLOADS & RESOURCES
Manufacturer Resources
Product Specs
- Series:
- 1066 Series
- ADA Compliant:
- Yes
- Product Group:
- Sliding Door and Barn Door Hardware
- Product Subgroup:
- Flush Pulls
- Product Type:
- Flush Pulls
- Subcategory:
- Flush Pulls
- Commercial/Residential:
- Commercial
- Product Model:
- 605,606, 613, 625, 626
- Product Category:
- Sliding Door and Barn Door Hardware
- Department:
- Door Hardware
Trimco TRI-1066S-932.626 – Frequently Asked Questions
1) What spindle size do I need for a Trimco 1066 drop-ring pull to work with my mortise lock?
The 1066, 1067 and 1068 drop-ring pulls take a half-spindle, and you pick the size to match the mortise lock hub already in the door: 3/8 inch square, 5/16 inch square, or 9/32 inch square. There is also a Dummy option with no spindle at all, for a door where the ring is decorative or where nothing is being operated. Measure the existing hub or check the lock manufacturer's spindle size before you pick, because the ring attaches to the half-spindle and that is the only thing tying it to the lock.
2) What is the difference between the Trimco 1066, 1067 and 1068 drop-ring pulls?
They are the same idea in three shapes. The 1066 is a round drop-ring pull, the 1067 is a drop-ring flush pull with a square plate, and the 1068 is a drop-ring flush pull with a round plate. All three are low-profile surface-mounted rings that operate a mortise lock, usually from the room side of the door. Trimco publishes a separate mounting template for each one (1066S, 1067, and 1068 template 17731), so the prep differs between them and you cannot swap plates after the door is cut.
3) Are Trimco drop-ring flush pulls ADA compliant for commercial doors?
Yes, the 1066/1067/1068 drop-ring pulls are listed ADA compliant, and they are a commercial-duty product rather than a residential one. That matters on institutional and multifamily work where the accessible route hardware has to be operable without tight grasping or twisting of the wrist.
4) Can I retrofit a Trimco drop-ring pull onto the mortise locks already in my building?
Usually, and the deciding factor is the hub. The rings are built with multiple spindle sizes and orientations so they mate to most mortise locks, with 3/8 inch, 5/16 inch and 9/32 inch square half-spindles offered. Pull one lock, measure the hub, and order to that. What the ring will not do is change the door prep: each of the three models has its own template, so a retrofit into an existing plate cutout only works if the old pull used the same footprint.
5) What is the difference between the Trimco 1066 drop-ring pull and the Orca Hardware 2-1/8 inch round flush pull?
They solve two different problems in the door face. The Trimco 1066 is a drop-ring pull that mounts to half-spindles and turns a mortise lock from the door face, which is why it is offered with 3/8 inch, 5/16 inch and 9/32 inch square spindles as well as a dummy version with no spindle. The Orca Hardware FPULL is a 2-1/8 inch diameter round flush pull -- a recessed cup for grip only, with no spindle and no lock connection. If the opening needs the pull to retract a mortise latch, the drop-ring with a spindle is the one that does it; if the opening only needs a finger pull on a sliding or pocket panel, the round flush pull covers it.
6) For a behavioral health or detention opening, can a Trimco drop-ring flush pull be used, or is a ligature-resistant pull required?
A drop-ring pull has a hinged ring that swings away from the door face, so it presents a loop a cord can pass through -- it is built for handball courts, research facilities and adjoining rooms, and for hospitality, multifamily and office buildings. Where the specification calls for ligature resistance, the ABH 1911 Series flush door pull is the ligature-resistant design in the same flush-pull category. Specify the 1066, 1067 or 1068 on standard commercial openings and the ABH 1911 where the room type drives a ligature-resistant requirement.
7) Which flush pull matches a mortise lock spindle, and which ones will not connect to a lock at all?
Spindle size is the deciding spec. The Trimco 1066, 1067 and 1068 drop-ring pulls are the ones that mate to a mortise lock, with 3/8 inch, 5/16 inch and 9/32 inch square half-spindles covering most mortise lock hubs, plus a dummy for openings with no lock. Neither the Orca Hardware 2-1/8 inch round flush pull nor the ABH 1911 Series flush door pull is a spindle-driven pull, and the Baldwin Estate 8601 pocket door pull is offered for passage and dummy. Measure the existing lock hub first: if it is 3/8, 5/16 or 9/32 inch square, the Trimco drop-ring is the direct match.
8) Is a drop-ring pull the right choice, or should I use a lever or knob?
A drop-ring pull is for openings where a projecting lever or knob is a problem: the ring sits flat against the door and drops out of the way when it isn't being used. Trimco names handball courts, research facilities, and adjoining rooms as the typical applications, and lists hospitality, multifamily and mixed-use, and office buildings as the building types. It operates the mortise lock from the inside face. If you need normal two-side operation with a full grip, a lever trim or knob on the mortise lock is the better answer; the ring is a low-profile substitute, not a full-function handle.
9) What finishes do the Trimco 1066/1067/1068 drop-ring pulls come in, and will they match the rest of my hardware?
Five finishes, all standard BHMA numbers so they cross-reference against whatever is already on the openings: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 625 bright chrome, and 626 satin chrome. If your building is standardized on 626 satin chrome, which most commercial multifamily and office work is, the ring pull matches without a special order. There is no 630 stainless option, so a stainless-standardized facility will not get an exact match here.
10) I just need a plain flush pull for a pocket or sliding door, not a ring that works a lock. What should I look at?
Then the drop-ring pulls are the wrong family, since the ring exists to turn a mortise lock hub through a half-spindle. For a straight recessed pull, the Orca Hardware 2-1/8 inch diameter round flush pull is a simple round cup, and the Baldwin Estate 8601 pocket door pull is made for passage and dummy pocket door use. For a behavioral health or detention opening, the ABH 1911 Series flush door pull has a ligature-resistant design.
11) What is a good alternative to a Trimco drop-ring pull for a pocket door that does not need to operate a lock?
The Baldwin Estate 8601 is a pocket door pull offered for passage and dummy applications, which is the straightforward choice on a sliding pocket panel that only needs to be pulled open and closed. The Trimco drop-ring pulls are the alternative when the same flush opening needs to work a mortise lock -- the 1066 round, 1067 square and 1068 round bodies take 3/8 inch, 5/16 inch or 9/32 inch square spindles. Trimco also builds a dummy configuration if the drop-ring look is wanted on the inactive side.
12) I need a flush pull in oil rubbed bronze to match other doors in a hotel corridor -- which one should I standardize on?
The Trimco 1066, 1067 and 1068 drop-ring pulls come in 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 625 bright chrome and 626 satin chrome, so 613 oil rubbed bronze is available across all three body styles -- 1066 round, 1067 square and 1068 round. That lets a hospitality property run one finish across guest room, adjoining room and back-of-house openings while varying only the body shape and spindle. The Baldwin Estate 8601 pocket door pull and the Orca Hardware FPULL round flush pull are separate programs, so matching a corridor to a single finish family is simpler within the Trimco 1066 Series.
13) Is a drop-ring pull an ADA compliant option, or should I look at a different flush pull style?
The Trimco 1066, 1067 and 1068 drop-ring pulls are ADA compliant and rated for commercial use, and the ring drops flat against the door face when not in use while still giving something to grip and turn. Among the alternatives, the ABH 1911 Series is the ligature-resistant flush door pull and the Orca Hardware FPULL is a 2-1/8 inch diameter recessed round pull. For an accessible opening where the pull also has to operate a mortise lock, the drop-ring is the configuration that does both.
14) What is the Dummy option on a Trimco 1067 drop-ring pull for?
Dummy means the ring ships without a working spindle, so it pulls the door but operates nothing. Use it on the inactive leaf of a pair, on a closet or a false door, or where you want the same ring appearance on an opening that has no mortise lock behind it. If you need the ring to actually retract the latch, order one of the square spindle sizes instead.
How fast can I get the Trimco TRI-1066S-932.626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-1066S-932.626 come with a warranty?
Absolutely. The Trimco TRI-1066S-932.626 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-1066S-932.626?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-1066S-932.626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.