Trimco 1097HA Series Anti-Vandal Pull without Astragal

The Trimco 1097HA is a full-cover anti-vandal pull from the 1090 Series, built without exposed handles or fasteners that can be pried, unscrewed or wrenched off. A conventional pull like the Ives 8103HD is a round bar through-bolted to the face of the door, which gives a vandal something to grab and hardware to attack. The 1097HA covers the trim area instead, which cuts down damage to the lock trim behind it. It is heavy duty, and the version without an astragal is the one to order when you are not covering the gap on a pair of doors.

Without is the version for a single door, or for a pair where you are not trying to close off the meeting gap. The astragal version of the 1090 Series adds the strip that covers the space between two door leaves, protecting the gap from pry attack on a pair. If the opening is one leaf, the astragal does nothing for you.

Both. The 1090 Series anti-vandal pulls are made to mate to exit devices, mortise locks or cylindrical locks, and are available for in-swing and out-swing doors. That is the reason this pull shows up on school and municipal openings where the same trim style has to cover a mix of exit device doors and mortise lock doors. You specify which lock or device it is mating to when you order, since the cutout has to match the trim behind it.

That is exactly the failure the 1090 Series is built against. Trimco calls out schools, parks, public buildings and commercial buildings as the target applications, and the reason it survives there is that there is no exposed handle to lever against and no exposed fastener head to attack. Prisons, government facilities and retail strip malls are on the same application list. If your current pull is a through-bolted bar, the vandal has a lever; this trim takes the lever away.

The Trimco 1097HA is a heavy duty anti-vandal pull that has no exposed handles or fasteners to tamper with and mates to exit devices, mortise locks, or cylindrical locks. The nearest heavy duty peers are the Ives 8102HD straight door pull with a 3/4 inch round bar and 1-1/2 inch clearance, the Ives 8103HD straight pull with a 1 inch round bar and through bolt mounting, and the Ives 8169 C style offset solid pull at 1 inch diameter with heavy duty mounting. Those three are conventional bar pulls with visible grips and through bolts, so they are equivalents on duty level but not on the concealed-fastener, flush anti-vandal form of the 1097HA.

The Trimco 1097HA is ADA compliant and built for the anti-vandal case at schools, prisons, government facilities, and retail. On an opening with no tamper exposure, the Ives 8145EZHD is a 45 degree offset door pull with heavy duty mounting hardware that is also stated ADA compliant, and the ABH AB3300 straight flat end pull at 1.00 inch diameter is a plain commercial door pull. Those give you a graspable commercial pull without the concealed-fastener construction the 1097HA is built around.

Five finishes: 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 629 bright stainless steel and 630 satin stainless steel. For a building standard, 630 satin stainless is the one that hides handling marks and matches most commercial trim on the other openings. 629 bright is polished and shows fingerprints in a high traffic entry. 613 and 613E are the living-finish bronzes, so they will continue to darken with use, which matters if you are patching in one door among several installed years ago.

Different jobs. The Ives 8102HD and 8103HD and the ABH AB3300 and AB7200 are bar-style pulls, round stock through-bolted to the door face, and they are what you use on a normal commercial entry where nobody is attacking the hardware. The 1097HA is anti-vandal trim: no exposed handle, no exposed fasteners, and it mates to the exit device or lock behind it. If the openings are getting hit, the bar pull is the wrong answer no matter how heavy the duty rating. If they are not, a bar pull is simpler to order and install.

The Ives 8145EZ is a 45 degree offset pull with heavy duty mounting hardware and is ADA compliant. It is the straightforward choice for an office, clinic or tenant entry where accessibility is the requirement and vandalism is not. Go to the Trimco 1097HA when the opening is exposed, unsupervised or has a history of trim damage, since it is ADA compliant as well but adds the tamper resistance.

Either. The 1090 Series pulls are available to mate to locksets and exit devices for both in-swing and out-swing doors, so the swing direction is part of what you specify rather than a reason to rule the product out. On an outswing exterior door you are typically pairing it with the exit device trim on the pull side.

The Trimco 1097HA is built to mate to exit devices, mortise locks, or cylindrical locks as an anti-vandal pull. If the opening only calls for a pull that carries a rim cylinder for night latch operation, the Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, in stainless steel construction. It handles the cylinder-and-pull function on a narrower footprint rather than covering the trim area the 1097HA does.

The Trimco 1097HA is a heavy duty anti-vandal pull that mates to the lockset or exit device on the door. For a back-to-back arrangement with a grip on each face, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset door pull set, the Deltana SSPORBB24 is a 24 inch back-to-back round offset set, the Deltana OHP620 is an off-set handle pull back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick, and the Sure-Loc PL-2KN is a knurled long door pull in a double-sided configuration.

The Trimco 1097HA is a heavy duty anti-vandal pull with no exposed handles or fasteners, offered in oil rubbed bronze, dark oxidized satin bronze, matte black, bright stainless steel, and satin stainless steel. The ABH AB3310 is an offset flat end door pull handle in a commercial grade surface mount, and the ABH AB3330 is an offset round end pull available with custom length options. The ABH pulls are surface mounted bar pulls sized to the opening, while the 1097HA is a trim-style pull that ties into the lockset or exit device.

The Trimco 1097HA is offered in bright stainless steel and satin stainless steel among its finishes and is made without exposed fasteners. If you specifically want a through-bolted stainless bar pull, the ABH AB7200 is a solid stainless steel flat end pull handle at 7/8 inch diameter with through-bolt mounting, and the Ives 8103HD is a heavy duty straight pull at 1 inch round with through bolt mounting. Both put visible fasteners on the opposite face, which is the trade against the concealed construction of the 1097HA.

The Trimco 1097HA is offered in bronze, brass and aluminum substrate with finishes including 613 oil rubbed bronze and 613E dark oxidized satin bronze, which covers the bronze specification across an anti-vandal fleet. The one comparable in cast bronze is the Emtek Art Nouveau 8 inch lost wax cast bronze door pull, which is selected by handing and is a decorative pull rather than a heavy duty one. For a facility standard on heavy duty openings the 1097HA carries the bronze finishes itself.

No. The Sure-Loc PL-1RD is a round long door pull, single-sided, with a choice of concealed or thru-bolt mounting, and the PL-1KN is the knurled version single-sided with thru-bolt mounting. Both are grip bars. The Trimco 1097HA is a heavy duty anti-vandal pull with no exposed handles or fasteners that mates to exit devices, mortise locks, or cylindrical locks, so it also protects the trim area of the door rather than only providing a grip.