Trimco 1748 Offset Pull "C" Sh...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$338.10
$247.96
Trimco 1748 Offset Pull "C" Shaped Grip - 1" Dia - 3/4 Dia.

Trimco 1748 Offset Pull "C" Shaped Grip - 1" Dia - 3/4 Dia.

(No reviews yet) Write a Review

Model: TRI-1748.626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$338.10
$247.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

TRIMCO 1748 “C" SHAPED OFFSET PULL

12" CTC ¾" Dia. “C" Shaped Offset Pull

 

1748 SERIES "C" SHAPED OFFSET PULLS OVERVIEW

The 1748 Series are bent into an elegent offset “C” shape and compliments many architectural designs. Offered in 3/4″ and 1″ diameter stainless steel, bronze or brass and available in most architectural finishes. Multiple mounting methods for steel, wood or glass door applications.

 

PRODUCT FEATURES

  • Elegent offset "C" design compliments many architectural designs.
  • Manufactured from solid stainless steel, bronze or brass for durability and long life.
  • 12" CTC and available in 3/4" or 1" diameter material.
  • ADA compliant

 

FUNCTIONS/OPTIONS

  • 1748 12" CTC ¾" Dia. “C" Shaped Offset Pull
  • 1748-1 12" CTC 1" Dia. “C" Shaped Offset Pull

 

APPLICATIONS

  • Government & Military Facilities
  • Retail & Strip Malls
  • Hospitality
  • Multifamily & Mixed-Use

 

STANDARDS

  • USGCBC Certified
  • BHMA Certified
  • ADA Compliant

 

DOWNLOADS & RESOURCES

Templates

Warranty

1748 Series

Content Sheet

Manufacturer Resources

Product Specs

Series:
1748 Series
ADA Compliant:
Yes
Clearance:
2-5/8"
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pull
Duty Level:
Heavy Duty
Commercial/Residential:
Commercial
Subcategory:
Door Pulls, Push and Pull Plates
Hang Type:
Offset Hung
Healthy Hardware:
Yes
(CTC) Center-to-Center:
12"
Product Projection:
1-7/8"
Product Category:
Door Trim and Accessories
Product Substrate:
Brass or Bronze
Department:
Door Hardware

Trimco TRI-1748.626 – Frequently Asked Questions

1) What is the center-to-center spacing on the Trimco 1748 C-shaped offset pull, and will it match my existing mounting holes?
The 1748 offset pull is drilled 12 inches center to center, which is the standard CTC for commercial entrance pulls. If the holes already in your door or glass door rail are on 12 inch centers, it drops straight onto the existing prep. Anything else means new prep.
2) Does the Trimco 1748 pull give enough hand clearance to be ADA compliant?
Yes. Clearance behind the grip is 2-5/8 inches and total projection off the face of the door is 1-7/8 inches, and the pull is stated ADA compliant. That clearance is what lets a user get a full hand behind the bar without a tight grasp, which is what ADA is after on operable hardware.
3) What is the difference between the Trimco 1748 and the 1748-1?
Grip diameter is the only difference. The 1748 uses 3/4 inch diameter bar, the 1748-1 uses 1 inch. Both are the same C-shaped offset form at 12 inch CTC. Pick the 1 inch where you want a heavier look and a fuller grip; the 3/4 inch reads slimmer on lighter or residential-scale doors.
4) Can the Trimco 1748 offset pull be mounted on a glass door?
Yes. The 1748 Series offers multiple mounting methods covering steel, wood and glass door applications, so it can be specified for a glass front as well as a hollow metal or wood opening. You specify the mounting method to suit the door you are working on.
5) Is the Trimco 1748 pull heavy enough for a high traffic entrance?
It is rated heavy duty and built for commercial use, made from solid stainless steel, bronze or brass rather than tube or plated pot metal. That is the right class of pull for retail, hospitality, government and multifamily entrances where the door gets pulled hundreds of times a day.
6) What finishes does the Trimco 1748 offset pull come in, and can I match the rest of my door hardware?
Ten BHMA finishes: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome, 626 satin chrome, 628 satin aluminum, 629 bright stainless and 630 satin stainless. Because those are standard BHMA numbers, you can match locksets, closers and push plates from other lines by specifying the same code, 630 being the usual commercial default.
7) Should I use a C-shaped offset pull or a straight pull on my entrance door?
An offset pull like the 1748 bends the grip away from the door face, so the hand stays clear of the stile and the pull reads as a designed element rather than a plain bar. A straight pull, such as the Ives 8103HD 1 inch round or the ABH AB3300 flat end pull, sits parallel to the door and is the plainer, more utilitarian choice. If the architect drew a curved or offset grip, the straight pull will not satisfy the elevation.
8) Is the Trimco 1748 a back-to-back pull set or a single pull?
The 1748 is a single pull at 12 inch CTC. If you need grips on both faces of the door, order two and specify a back-to-back mounting method. For a factory back-to-back set, the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back offset pulls, and the Deltana OHP620 is a back-to-back offset set for 1-1/8 to 1-3/8 inch doors.
9) I need a straight pull instead of a C shaped one for a flush storefront door. What should I use?
For a straight grip rather than the bent C shape of the Trimco 1748, the Ives 8103HD is a heavy duty straight door pull in 1 inch round stock with through bolt mounting, and the Ives 8102HD is a heavy duty straight pull using 3/4 inch round bar with 1-1/2 inch clearance. The ABH AB3300 is a straight flat end commercial pull in 1.00 inch diameter. The 3/4 inch and 1 inch bar sizes on those match the two diameters the 1748 series is made in.
10) What other offset pulls should I look at if the C shape of the Trimco 1748 does not suit the door?
The Ives 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware and is ADA compliant, giving a angled leg instead of a curve. The ABH AB3310 is an offset flat end surface mount pull and the ABH AB3330 is an offset round end pull with custom length options if you need a center dimension other than the 12 inch center-to-center the Trimco 1748 is built on.
11) Which pull matches the Trimco 1748 for a 12 inch center dimension on a single side?
The Deltana SSP1210 is a 12 inch contemporary pull mounted single side, which lines up with the 12 inch center-to-center of the Trimco 1748. The Trimco 1748 is bent to a C shaped offset with a 2-5/8 inch clearance and a 1-7/8 inch projection, so hand clearance behind the grip differs from a contemporary straight profile.
12) Does a Cal-Royal PUL-175 do the same job as the Trimco 1748?
No. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height in stainless steel, used at a rim cylinder to pull the door where a mortise cylinder is installed. The Trimco 1748 is a 12 inch center-to-center C shaped offset grip pull with no cylinder provision, so it is not a replacement for a night latch pull.
13) Does the Trimco 1748 pull carry BHMA certification and count toward green building credit?
It is BHMA certified and USGBC certified per the manufacturer's standards listing, and it is flagged as Healthy Hardware. For a spec writer chasing green building documentation on a government, healthcare or education project, those are the two lines that matter on the submittal.
14) What material is the Trimco 1748 offset pull made from?
Solid stock, not hollow tube. The series is produced in stainless steel, bronze or brass depending on finish, with brass or bronze listed as the base substrate. Brass and bronze finishes such as 605, 606, 613 and 613E come on brass or bronze bar; 629 and 630 are stainless.
15) I want a lighter bar diameter than the Trimco 1748-1. What are the options?
The Trimco 1748 itself is offered in 3/4 inch diameter alongside the 1 inch 1748-1. If you are cross shopping, the ABH AB7200 is a solid stainless steel flat end pull in 7/8 inch diameter with through-bolt mounting, and the Ives 8102HD uses 3/4 inch round bar with 1-1/2 inch clearance. Note those are straight profiles rather than the C shaped offset of the 1748.
How fast can I get the Trimco TRI-1748.626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-1748.626 come with a warranty?
Absolutely. The Trimco TRI-1748.626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-1748.626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-1748.626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!