Trimco 3071-1 Coat Hook - 4-1/2" High

It is the heavy-duty one in Trimco's hook range. Trimco positions the 3071 and 3071-1 as the heavy-duty, more durable hooks against the 3070-1 traditional cast coat and hat hook, and the 3071-1 is a commercial-duty item, not a residential accessory. Bodies are stainless steel, brass, or bronze rather than plated pot metal. Trimco names commercial and industrial buildings, government and military facilities, hospitality, multifamily and mixed-use, and office buildings as the applications, which is the abuse level this hook is built around.

Seven finishes: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 625 bright chrome, 626 satin chrome, 629 bright stainless steel, and 630 satin stainless steel. Those are standard BHMA finish numbers, the same codes stamped on levers, push plates, and closers, so a 630 hook lands in the same satin stainless family as your 630 pulls and a 626 hook sits with 626 lockset trim. For a building already standardized on satin stainless, 630 is the one that disappears into the rest of the openings.

Single-hook substitutes across the brands ZenSupply carries are the Deltana BBN2009 Single Robe Hook in the BBN Series, the Emtek 25050 Wrought Steel Robe Hook, the Emtek 2606 Solid Brass Robe Hook, the Orca Hardware 2753 Cypress Robe Hook in the 27-Cypress Series and the Orca Hardware 3654 Swirl Robe Hook in the 36-Swirl Series. The Trimco 3071-1 itself is a 4-1/2 inch high coat hook built from stainless steel, brass or bronze and is used in commercial and industrial buildings, government and military facilities, hospitality, multifamily and office buildings.

The Trimco 3071-1 is a 4-1/2 inch high coat hook offered in stainless steel, brass or bronze. When the opening needs a two-prong hook, the closest cross-brand equivalents are the Deltana 55D2010 Double Robe Hook in the 55D Series solid brass, the Deltana 88DRH Double Robe Hook in the 88 Series solid brass, the Deltana BBS2010 Double Robe Hook in the BBS Series, the Orca Hardware 4854 Blakely Double Robe Hook in the 48-Blakely Series and the Orca Hardware 4954 Whidbey Double Robe Hook in the 49-Whidbey Series. Any of the five covers a double-hook line on the schedule; the Deltana pair are the two stated in solid brass.

They are close in form but they come from different design programs, and that is the thing to check before swapping. The Emtek 2266 SELECT Knurled Tip Double Hook with Rosette belongs to the Select Bath Hardware series, the Emtek 2306 to the Sandcast Bronze Bath Hardware series, the Emtek 25050 to the Wrought Steel Bath Hardware series and the Emtek 2606 to the Traditional Bath Hardware series - each is drawn to coordinate with the towel bars and rings in its own bath suite. The Trimco 3071-1 is a commercial coat hook offered in seven architectural finishes, 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 625 bright chrome, 626 satin chrome, 629 bright stainless steel and 630 satin stainless steel, so it is specified against a door hardware finish schedule. If the hook has to read with the levers and push plates on the rest of the openings, the Trimco is the one written that way; if it has to read with a bath suite, the Emtek series hooks are.

Depends which finish you order. Trimco makes these hooks in stainless steel, brass, or bronze, and the finish code tells you which family you are in: 629 and 630 are the stainless steel finishes, 605 and 606 are the brass ones, 613 is oil rubbed bronze, and 625 and 626 are the chrome finishes. In a wet or coastal environment, or a restroom that gets hosed down, the 630 satin stainless is the one that holds up without the plating being the weak point.

The Trimco 3071-1 is a single coat hook in Trimco's 3070 line. For two hanging points on one mounting, look at the Deltana 55D2010 double robe hook in solid brass from the 55D Series, the Deltana 88DRH double robe hook in the 88 Series, the Orca Hardware 4854 Blakely or 4954 Whidbey double robe hooks, the Emtek 2266 SELECT knurled tip double hook with rosette, or the Emtek 2306 sandcast bronze double hook. Those are decorative bath-hardware patterns rather than commercial-duty hooks, so for a heavy-use corridor or restroom you may still be better off mounting two of the Trimco hooks.

The 3071-1 is a commercial-duty coat hook, styled to sit with institutional door hardware rather than with a bath suite. For a home bathroom or a hospitality guest room where the hook should match towel bars and a decorative bath set, the Emtek 2606 solid brass robe hook from the Traditional Bath Hardware line, the Emtek 25050 wrought steel robe hook, the Orca Hardware 2753 Cypress or 3654 Swirl robe hooks, or the Deltana BBN2009 single robe hook are the decorative single-hook options. Keep the Trimco where the traffic is heavy and the look needs to follow the building's door hardware.

Trimco's hook range runs from traditional to contemporary. The 3071-1 at 4-1/2 inches high is the heavy-duty pattern, the 3070-1 is the traditional cast coat and hat hook, and the 3072 and 3073 are the contemporary round hooks. If the interior package is modern and the rest of the trim is round-rose lever hardware, the 3072 or 3073 reads better on the wall; if the priority is a hook that survives a public corridor, stay with the 3071-1.

The Trimco 3071-1 coat hook is manufactured from stainless steel, brass or bronze, so the material substitute depends on which one the job is written to. For bronze, the Emtek 2306 is a sandcast bronze double hook. For brass, the Emtek 2606 is a solid brass robe hook, and the Deltana 55D2010 and Deltana 88DRH are solid brass double robe hooks. For a steel hook, the Emtek 25050 is wrought steel. Matching the base material matters where the finish schedule or the corrosion exposure of the space is written around one metal.

The 3070 series runs to three profiles. The Trimco 3071 is the 5-1/2 inch high version of the same heavy-duty hook, one inch taller than the 4-1/2 inch 3071-1, which is the one to use where a longer body is needed to clear a chair rail or reach a stud line. The 3070-1 is the traditional cast coat and hat hook, and the 3072 is a contemporary round hook. All are drawn from the same stainless steel, brass and bronze construction. Trimco will also custom make a size or style outside the standard three.

Yes. Trimco will custom make hook sizes and styles to a submitted design in addition to the catalog patterns, which is worth knowing on a project where the architect has drawn a hook that does not match anything standard, or where an existing building's hooks need to be replicated across a renovation. Where a stock hook will do, the 3071-1 covers it at 4-1/2 inches high in seven finishes.

The Trimco 3071-1 is the heavy-duty profile in its line and is offered in seven architectural finishes from bright brass through satin stainless steel. Where the room calls for a patterned or named-design hook instead, Orca Hardware runs four: the 2753 Cypress Robe Hook in the 27-Cypress Series, the 3654 Swirl Robe Hook in the 36-Swirl Series, the 4854 Blakely Double Robe Hook in the 48-Blakely Series and the 4954 Whidbey Double Robe Hook in the 49-Whidbey Series. The Emtek 2266 SELECT Knurled Tip Double Hook is the one that comes with a rosette, which changes what the wall sees behind the hook.