Trimco 3071 Coat Hook - 5-1/2" High

The 3071 is the heavy-duty side of Trimco's hook range. Trimco describes the 3071 and 3071-1 as the heavy-duty, more durable hooks compared with the 3070-1 traditional cast coat and hat hook, and the 3071 is a commercial-rated item rather than a residential bath accessory. Trimco lists it for commercial and industrial buildings, government and military facilities, hospitality, multifamily and mixed-use, and offices.

The Trimco 3071 is a single 5-1/2 inch high coat hook. For a two-prong hook, the Deltana 55D2010 and the Deltana 88DRH are both double robe hooks in solid brass, from the 55D Series and the 88 Series respectively. The Orca Hardware 4854 Blakely and the Orca Hardware 4954 Whidbey are also double robe hooks, and the Emtek 2266 SELECT knurled tip double hook comes with a rosette. Doubles hang a coat and a garment bag on the same anchor point, which is the usual reason to move off a single hook in a guest room or locker area.

The Emtek 25050 robe hook is a wrought steel hook, so it is the closest metal-forward alternative among the peer hooks. The Trimco 3071 coat hook stands 5-1/2 inches high and is made from stainless steel, brass or bronze, and it is offered in Bright Stainless Steel (629) and Satin Stainless Steel (630) among its finishes. The Emtek 25050 sits in Emtek's Wrought Steel Bath Hardware line, which is a residential bath program rather than a commercial door trim item, so the 3071 is the one specified where the hook is being ordered as commercial door hardware.

Seven finishes, by BHMA code: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 625 bright chrome, 626 satin chrome, 629 bright stainless steel and 630 satin stainless steel. If you are standardizing a building on 630 satin stainless, which is the common commercial spec, the 3071 matches that without a custom order.

Depends on where it goes and who uses it. The Trimco 3071 is a commercial hook, and Trimco's own comparison puts the 3071 on the heavy-duty end of its range, which is what you want in a corridor, back-of-house or a high-turnover room. For a decorative guest bath where the hook is part of a matched accessory suite, a bath-hardware hook such as the Emtek 2606 Solid Brass Robe Hook from Emtek's Traditional Bath Hardware line or the Emtek 25050 Wrought Steel Robe Hook is the closer fit stylistically.

Not in profile. The contemporary round Trimco hooks are the 3072 and 3073; the 3071 is the heavy-duty style. If the existing hooks are round, order the 3072 or 3073 to match and keep the 3071 for the higher-abuse openings. Finish is the easier half of the match, since the 3071 is offered across the same common BHMA finishes including 613 oil rubbed bronze, 626 satin chrome and 630 satin stainless steel.

They are not the same part. The Trimco 3071 is a 5-1/2 inch high coat hook offered in seven architectural finishes from Bright Brass (605) through Satin Stainless Steel (630), and it is a commercial item specified alongside door hardware in offices, hospitality, multifamily, government and industrial buildings. The Deltana BBN2009 single robe hook and the Orca Hardware 2753 Cypress robe hook are bath-program robe hooks in decorative series - the BBN Series and the 27-Cypress Series - designed to coordinate with a bath suite. A robe hook will take a coat, but if the submittal calls for the Trimco 3070 series a decorative robe hook is not an equal.

The Trimco 3071 is 5-1/2 inches high. Within the same Trimco family the 3071-1 coat hook is 4-1/2 inches high and the 3072 is a contemporary round coat hook, so both give a shorter footprint on a narrow stile or a partition. If the shorter profile is going in a bath or guest room and a decorative look is acceptable, the Emtek 2606 solid brass robe hook and the Orca Hardware 3654 Swirl robe hook are single-hook options from the Traditional Bath Hardware and 36-Swirl series.

The Trimco 3071 coat hook is offered in Oil Rubbed Bronze (613), which is the standard BHMA finish number carried on lever, hinge and trim hardware, so it matches an existing 613 door hardware set directly. The Emtek 2306 is a sandcast bronze double hook from Emtek's Sandcast Bronze Bath Hardware line, which is a cast bronze look rather than a plated 613 finish, and it carries two prongs instead of one. For a fleet standardizing on 613 across doors, the 3071 is the coordinating choice; the 2306 is the choice when a cast bronze character piece is wanted.

Yes. Trimco custom makes coat hook designs and sizes to order in addition to the catalog styles. If a job's drawing calls for a hook geometry the 3071, 3071-1, 3072 or 3073 does not match, that is the route rather than substituting a different brand.

For a single hook with a more decorative profile, the Orca Hardware 2753 Cypress Robe Hook and the Orca 3654 Swirl Robe Hook are single hooks from styled series, and the Deltana BBN2009 Single Robe Hook is another single-point option. The trade-off is that the Trimco 3071 is the commercial-duty piece in this group, so for corridors, lockers and back-of-house the 3071 stays the one to spec.

Among the double hooks, the Deltana 55D2010 in the 55D Series and the Deltana 88DRH in the 88 Series are both described as solid brass, and the Deltana BBS2010 is a double robe hook in the BBS Series. The Trimco 3071 is a single coat hook made from stainless steel, brass or bronze and offered in Bright Brass (605) and Satin Brass (606), so it covers the brass appearance in a single-prong 5-1/2 inch high form.

The Trimco 3071 coat hook is offered in Bright Chrome (625) and Satin Chrome (626), both standard BHMA finish numbers, and it is a commercial item called out for hospitality, office, multifamily and government facilities. The bath-line peers such as the Emtek 2266 SELECT knurled tip double hook with rosette and the Orca Hardware 4954 Whidbey double robe hook are styled to coordinate with a decorative bath suite rather than with corridor door hardware, and both are two-prong hooks. For a corridor or guest room standardizing on 625 or 626 door trim, the 3071 keeps the finish call consistent.