You may also like
Trimco 7061 Series fOCAL Small Flush Cup Pulls (2-3/4" x 2-1/16")
Model: TRI-7061
7059 SERIES FOCAL FLUSH CUP PULLS OVERVIEW The fOCAL Flush Cup Pulls make a great upgrade to the standard sliding door cups. Available in many architectural finishes, these pulls have a black...
Trimco
Starting at
$98.70
$74.55
7059 SERIES FOCAL FLUSH CUP PULLS OVERVIEW
The fOCAL Flush Cup Pulls make a great upgrade to the standard sliding door cups. Available in many architectural finishes, these pulls have a black interior creating a unique and modern style that compliments other hardware in the space. Sizes range from 2-1/2″ round to rectangular options of 4-1/4″ x 3-1/8″ and 2-3/4″ x 2-1/16″.
FEATURES & BENEFITS
- Unique and modern flush cup design manufactured from stainless steel, bronze or brass.
- Includes black interior that accents the architectural finish.
- Multiple sizes and shapes available.
- Back-to-back mounting available on 1-3/8″ door (7059) or larger.
APPLICATIONS
- Hospitality
- Multifamily & Mixed-Use
- Office Buildings
Manufacturer Resources
Product Specs
- Series:
- 7059 Series
- ADA Compliant:
- Yes
- Product Group:
- Sliding Door and Barn Door Hardware
- Product Subgroup:
- Sliding Door Pulls
- Product Type:
- Sliding Door Pulls
- Subcategory:
- Sliding Door Pulls
- Commercial/Residential:
- Commercial
- Product Category:
- Sliding Door and Barn Door Hardware
- Department:
- Door Hardware
Trimco TRI-7060.626 – Frequently Asked Questions
1) What size is the Trimco 7060 fOCAL flush cup pull, and what other sizes does the fOCAL line come in?
The 7060 is the large rectangular fOCAL cup, 4-1/4 by 3-1/8 inches. The fOCAL family also runs a 2-1/2 inch round cup and a smaller 2-3/4 by 2-1/16 inch rectangle, so if the 7060 face plate is too big for a narrow stile or a pocket door rail, step down to one of those.
2) Can I mount Trimco fOCAL cup pulls back to back on both faces of a sliding door?
Back-to-back mounting is offered on doors 1-3/8 inches thick or greater, using the 7059 cup. That covers standard 1-3/8 inch residential slabs and 1-3/4 inch commercial doors. Thinner slabs will not take a pull on both faces.
3) Is the Trimco fOCAL flush cup pull ADA compliant for a commercial project?
Yes, the fOCAL cup pulls are listed ADA compliant and are a commercial-rated product. Typical use is hospitality, multifamily and mixed-use, and office buildings.
4) I need a sliding door pull that locks the bathroom. Does the Trimco 7060 do that, or do I need something else?
The Trimco 7060 fOCAL flush cup pull is a pull only, with no locking mechanism. For a bath or bedroom pocket door that needs to lock, use a pull with a privacy function instead: the Ives 991A aluminum sliding door pull and the Schlage Residential SC991 solid brass sliding door pull are both privacy/bed/bath function and both carry decorative coined edges. Choose the Trimco 7060 when the opening is a closet, pantry, or barn door that only needs a grip.
5) My barn door needs something to grab on the outside face, not just a recessed cup. What should I use instead of the Trimco 7060?
The Trimco 7060 fOCAL is a flush cup that sits recessed in the door face, so there is nothing protruding to grab from the open side. For a door that needs a surface grip plus a recessed pull, Orca Hardware's AH Series combos pair a bar pull with a recessed pull in one set: AH-COMBOPULL uses a round bar and AH-COMBOSQ uses a square bar. Both AH Series combos fit doors 1-3/8 inch to 1-3/4 inch thick.
6) What finishes are available on the Trimco 7060 fOCAL flush cup pull?
Seven: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome and 626 satin chrome. Every one of them has a black recessed interior, so the cup reads as a dark pocket against the finished face. If you are matching levers and hinges across a floor, these are standard BHMA finish numbers and will line up with the rest of your schedule.
7) Is a flush cup pull enough for a barn door, or do I need a bar pull too?
A flush cup like the 7060 sits in the door face and is meant for a pocket or bypass slider where the leaf passes into a wall or behind another panel and a projecting handle would foul. On a surface-mounted barn door you usually want something to grab from a standing position, so a combo is better. The Orca Hardware AH Series pairs a round bar or square bar pull with a recessed pull in one set, sized for 1-3/8 to 1-3/4 inch doors.
8) Will the Trimco fOCAL cup replace the standard flush cup already routed into my sliding doors?
Trimco positions the fOCAL cups as an upgrade to standard sliding door cups, so the intent is a straight aesthetic swap. Pick the fOCAL size closest to your existing mortise: the 7060 at 4-1/4 by 3-1/8 inches for a large rectangular cutout, 2-3/4 by 2-1/16 inches for a small rectangle, or the 2-1/2 inch round. Measure the existing pocket before you order, because any of the three will need the routing enlarged rather than reduced if it does not match.
9) For a hotel corridor closet pocket door, is the Trimco 7060 the right call over the residential privacy pulls?
For a closet or non-privacy opening in hospitality, the Trimco 7060 fOCAL large flush cup pull is the commercial-duty choice: it is rated commercial, ADA compliant, and made from stainless steel, bronze, or brass in seven architectural finishes including 613 Oil Rubbed Bronze, 622 Matte Black, and 626 Satin Chrome. The Ives 991A and Schlage Residential SC991 are privacy/bed/bath function pulls, so they belong on the guest bath or bedroom pocket door rather than the corridor closet.
10) What material are the Trimco fOCAL flush cup pulls made from?
They are manufactured from stainless steel, bronze or brass depending on the finish selected. That matters for a hospitality or multifamily corridor where a plated zinc cup would wear through at the thumb contact point within a few years.
11) Which Orca AH Series combo matches a modern square hardware package?
Orca Hardware offers the AH Series combo in two bar profiles: the AH-COMBOSQ with a square bar and recessed pull, and the AH-COMBOPULL with a round bar and recessed pull. Both are rated for 1-3/8 inch to 1-3/4 inch doors, so the choice is purely the bar profile against the rest of your lever and pull shapes.
How fast can I get the Trimco TRI-7060.626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-7060.626 come with a warranty?
Absolutely. The Trimco TRI-7060.626 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-7060.626?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-7060.626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.