You may also like
TRIMCO 7150 fOCAL Straight Cane Pull
7150 fOCAL Straight Cane Pull, 10" CTC 1" dia., Matte Black Poly Grip
7150/7160 SERIES fOCAL CANE PULLS OVERVIEW
The fOCAL 7150/7160 Series Cane Pulls offer a unique, modern design at an economical price point. Standard features include 1″ diameter stainless steel, bronze or brass construction and a matte black poly grip. ADA compliant and different mounting options available.
FUNCTIONS/OPTIONS
- 7150 fOCAL Straight Cane Pull, 10" CTC 1" dia., Matte Black Poly Grip
- 7160 fOCAL Offset Cane Pull, 10" CTC 1" dia., Matte Black Poly Grip
APPLICATIONS
- Commercial & Industrial Buildings
- Retail & Strip Malls
- Hospitality
- Multifamily & Mixed-Use
- Office Buildings
STANDARDS
- USGCBC Certified
- BHMA Certified
- ADA Compliant
DOWNLOADS & RESOURCES
Manufacturer Resources
Product Specs
- Series:
- 7150 Series
- ADA Compliant:
- Yes
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Door Pulls
- Duty Level:
- Heavy Duty
- Commercial/Residential:
- Commercial
- Subcategory:
- Door Pulls, Push and Pull Plates
- (CTC) Center-to-Center:
- 10"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Brass or Bronze
- Department:
- Door Hardware
Trimco TRI-7150.626 – Frequently Asked Questions
1) What is the difference between E-Mount and G-Mount on the Trimco 7150 cane pull?
E-Mount is a thru-bolt with a finish washer, used when there is a push plate, flat plate, or nothing on the opposite face and you want the fastener heads covered. G-Mount is the back-to-back arrangement, using threaded shoulder bolts and set screws so two pulls mount through the door opposite each other with no exposed heads. Both are required selections, so decide the opposite face before you order.
2) Is the Trimco 7150 cane pull ADA compliant for a public entrance?
Yes. The 7150 fOCAL straight cane pull is listed ADA compliant, and it is BHMA certified and USGBC certified per Trimco. The 1 inch diameter round grip is the shape that gives the graspable, no-tight-pinch operation ADA looks for on an accessible opening.
3) Can I use the Trimco 7150 to replace an existing pull without drilling new holes?
Only if the existing pull is on 10 inch centers, which is the fixed spacing on the 7150. Anything else and you are into new prep or a filler plate. If your current holes are on a longer spread, look at a pull offered in custom lengths such as the ABH AB3330 offset round end series rather than trying to force this one.
4) I need an offset pull instead of a straight one - what should I use?
The Trimco 7150 is the straight version; the companion 7160 fOCAL offset cane pull uses the same 10 inch center-to-center and 1 inch diameter with matte black poly grip. Outside the Trimco line, offset options include the ABH AB3310 offset flat end pull, the ABH AB3330 offset round end pull with custom length options, the Ives 8169 C style offset pull at 1 inch diameter, and the Ives 8145EZHD, which is a 45 degree offset pull described as ADA compliant.
5) What is the closest straight 1 inch diameter commercial pull to the Trimco 7150 cane pull?
The Trimco 7150 fOCAL is a straight cane pull with a 1 inch diameter grip on 10 inch center-to-center spacing. Two straight 1 inch peers cover the same basic shape: the Ives 8103HD heavy duty straight door pull is a 1 inch round with through bolt mounting, and the ABH AB3300 is a straight flat end pull handle at 1.00 inch diameter. The difference is the grip treatment - the 7150 carries a matte black poly grip over the metal bar, while the Ives and ABH pulls are plain metal bar.
6) The 10 inch center-to-center is too short for our entrance doors - what is a longer pull?
The Trimco 7150 fOCAL is fixed at 10 inch center-to-center. For longer grips, the Deltana SSP1210 is a 12 inch contemporary pull in a single side configuration, and the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back offset pulls in modern flat and round profiles. The ABH AB3330 offset round end pull is offered with custom length options if you need a length between those points.
7) If I need an ADA compliant pull for a commercial entrance, which options state ADA?
The Trimco 7150 fOCAL cane pull is ADA compliant and rated heavy duty for commercial use, in brass or bronze substrate with finishes from bright brass and satin brass through oil rubbed bronze, matte black, satin chrome, and bright or satin stainless steel. Among the peers, the Ives 8145EZHD 45 degree offset pull is also described as ADA compliant with heavy duty mounting hardware, so it is the offset choice when the same requirement applies.
8) What finishes does the Trimco 7150 fOCAL cane pull come in?
Eight: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 626 satin chrome, 629 bright stainless steel and 630 satin stainless. If you are matching existing hardware across a building, 630 satin stainless is the usual commercial standard and 626 satin chrome is the common match to older chrome trim. The poly grip section itself is matte black regardless of the metal finish.
9) Is the Trimco 7150 tough enough for a high traffic retail or apartment entrance?
It is rated heavy duty and built for commercial use, with a 1 inch diameter stainless steel, bronze or brass bar. Trimco lists it for commercial and industrial buildings, retail and strip malls, hospitality, multifamily and mixed-use, and offices. The poly grip is the wear surface, so it takes the hand oils and cold-weather contact rather than the metal.
10) Do I get two pulls when I order the Trimco 7150, or one?
The 7150 is a single cane pull. Choosing G-Mount is the back-to-back configuration, which means a pull on each face of the door, so order accordingly for the count you need. E-Mount thru-bolt with finish washer is the single-side arrangement.
11) Is the Cal-Royal PUL-175 an alternative to the Trimco 7150?
No. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, in stainless steel - it mounts around a rim cylinder to pull the door and is not a grab bar. The Trimco 7150 fOCAL is a 10 inch center-to-center cane pull with a 1 inch diameter poly grip, used as the hand-hold on the door face. If your door has a rim cylinder and you need the cylinder escutcheon pull, the PUL-175 is the right family; otherwise stay with the 7150.
How fast can I get the Trimco TRI-7150.626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-7150.626 come with a warranty?
Absolutely. The Trimco TRI-7150.626 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-7150.626?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-7150.626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.