Trimco 59 Classic Pull - 10" CTC

The Trimco 59 is a commercial pull with decorative roses on 8 inch centers, styled for a finished opening. Where the traffic calls for a heavier bar, Ives offers heavy duty straight pulls: the 8103HD is a 1 inch round bar with through bolt mounting, and the 8102HD is a 3/4 inch round bar with 1-1/2 inch clearance. For an offset grip, the Ives 8145EZHD is a 45 degree offset pull described as ADA compliant, and the Ives 8169 is a C style offset pull of 1 inch diameter.

The Trimco 59 Classic Pull is furnished with thru-bolt mounting as standard, with other mounting methods available. If the opening needs matched pulls on both faces supplied as a set, Deltana lists back-to-back sets including the OHP620 off-set handle pull for 1-1/8 inch to 1-3/8 inch doors, the SSPOBB24 24 inch modern offset pair and the SSPORBB24 24 inch round offset pair. Sure-Loc's PL-2KN is a knurled long pull in a double-sided configuration.

Seven finishes: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome and 626 satin chrome. If you are matching existing openings in a building, order by the BHMA finish number rather than the name, since 613 and 613E are both bronzes but read very differently once installed.

It is a commercial-rated pull. Trimco classifies the 59 Classic Pull as commercial, and the thru-bolt mounting that comes standard is what holds up on doors seeing daily traffic in offices, schools and multi-family common areas. It will work fine on a residential entry if you want the look, but the duty level is aimed at commercial openings.

The 59 Classic Pull is a decorative pull with roses at the mounting points, so the rose covers the fastener location on the pull side and the bolt still runs through the door. Functionally it installs like any thru-bolted pull, but the roses set the visible footprint, so on a narrow stile door or a door with a lock or exit device nearby, check that the rose diameter clears that hardware before you drill.

The 59 is ordered as a pull with thru-bolt mounting, so a back-to-back arrangement is a question of what Trimco mounting method you specify for the second face. If you specifically want a factory back-to-back set out of the box, the Deltana SSPOBB24 24 inch modern offset and SSPORBB24 24 inch round offset are supplied as back-to-back pairs, and the Deltana OHP620 offset handle pull ships as a back-to-back set for 1-1/8 to 1-3/8 inch doors.

No. The Trimco 59 is a door pull on 8 inch centers used as door trim. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height in stainless steel, which mounts over a rim cylinder and is not an equivalent grip for a standard pull prep. If the door has an existing 8 inch pull pattern, stay with a pull such as the Trimco 59 or an Emtek Brisbane 8 inch door pull.

The Trimco 59 is an 8 inch center-to-center pull. For longer grips, Deltana lists the SSP1210 12 inch contemporary pull as a single side unit and the SSPOBB24 at 24 inch back-to-back. ABH's AB3330 offset round end pull is offered with custom length options, and the AB3310 is an offset flat end surface mount pull.

No handing to specify. The 59 Classic Pull is a symmetrical pull, so the only selection you make is the finish. Compare that with the Emtek Art Nouveau 8 inch pull, where handing is a required choice at order time.