Trimco 57 Classic Pull - 8" CTC with Decorative Roses

The Trimco 57 Classic pull is an 8 inch center-to-center pull, so the two mounting holes in the door sit 8 inches apart. If you are replacing an existing pull, measure hole center to hole center before ordering; anything other than 8 inches means new holes or a different pull.

The Trimco 57 Classic Pull is a commercial pull, but it is a short 8 inch center-to-center design with decorative roses at each end. For an opening taking constant public traffic where the styling is not the point, the Ives heavy duty pulls are the plainer route: the 8103HD is a 1 inch round straight pull with through bolt mounting, the 8102HD is a straight pull on 3/4 inch round bar with 1-1/2 inch clearance, the 8169 is a C style offset solid pull at 1 inch diameter, and the 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware. All four are catalogued at a heavy duty level.

The Trimco 57 Classic Pull is an 8 inch center-to-center pull with decorative roses, thru-bolt mounted as standard. If your drawing calls out an ADA compliant pull by name, the Ives 8145EZHD is the one in the group described as ADA compliant - a 45 degree offset pull in the EZ series with heavy duty mounting hardware. Specify that one where the barrier-free callout has to be satisfied on paper.

Seven finishes: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome, and 626 satin chrome. That covers the usual brass and chrome pairings, so a property manager matching existing lever or hinge finishes across a floor can generally hold the same BHMA number through the building.

It is classified commercial. The 57 Classic is a decorative-rose pull, so it suits entrances, offices, and hospitality openings where the look matters but the traffic is still commercial. For heavier abuse, a plain bar pull like the Ives 8103HD (1 inch round, through-bolt) is a heavy duty alternative.

The Trimco 57 Classic Pull is an 8 inch center-to-center pull supplied with thru-bolt mounting as standard, with other mounting methods available. If you specifically want a factory back-to-back set so both faces are handled in one order, the Deltana OHP620 off-set handle pull is sold as a back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick, and the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back pulls in flat and round offset profiles. Sure-Loc's PL-2KN is a knurled long pull in a double-sided configuration.

The Trimco 57 Classic Pull is a short grip pull on 8 inch centers with decorative roses at the mounting points - it is sized for a hand, not for a full-height storefront look. The long pulls are a different product entirely: the Deltana SSP1210 is a 12 inch contemporary pull mounted on a single side, the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back offset pulls in modern flat and round profiles, and Sure-Loc makes long pulls in knurled, round, and square profiles, single-sided in the PL-1KN, PL-1RD, and PL-1SQ and double-sided in the PL-2KN. Choose the long pulls when you want a tall vertical bar on a glass or entrance door, and the 57 when you want a compact decorative pull.

No. The Trimco 57 Classic Pull is a plain grip pull on 8 inch centers with decorative roses and thru-bolt mounting - there is no cylinder prep in it. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height in stainless steel, designed to carry a rim cylinder for a night latch application. If the door needs to be keyed through the pull, the PUL-175 is the correct part; the 57 will not accept a cylinder.

The Trimco 57 Classic Pull carries decorative roses at each end of an 8 inch center-to-center grip. For a plainer bar without the rose detail, ABH offers the AB3300 straight flat end pull handle at 1.00 inch diameter, the AB7200 solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting, and the offset AB3310 flat end and AB3330 round end pulls, the AB3330 available with custom length options. These are utilitarian commercial profiles rather than decorative ones.

The Trimco 57 Classic Pull is ordered by finish on an 8 inch center-to-center size, with choices including 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome, and 626 satin chrome - no handing selection is part of the order. If your design calls for a directional pull, the Emtek Art Nouveau 8 inch lost wax cast bronze pull is ordered with handing selected, so left and right doors get mirrored parts.

The roses are the two decorative escutcheon plates the pull's posts land on at each end, covering the mounting holes in the door face. They are part of the 57 Classic design rather than a separate order item, which is why this pull reads as traditional trim next to a plain bar pull.

No. The 57 Classic is a symmetrical 8 inch center-to-center pull, so it goes on either a left or right hand door without a handing call-out. If you specifically need a handed decorative pull, the Emtek Art Nouveau 8 inch pull is ordered by hand.