Trimco 58 Classic Pull - 8" CTC

The Trimco 58 Classic Pull is an 8 inch center-to-center pull, so the two mounting holes sit 8 inches apart. If you're replacing an existing pull and the old holes are 8 inches apart, this drops onto the same prep.

Thru-bolt mounting is standard on the 58 Classic Pull, meaning fasteners pass through the door and anchor against the opposite face. Trimco publishes additional mounting methods if thru-bolting isn't workable on your door, such as when a plate or another pull occupies the back face.

The Trimco 58 Classic Pull uses decorative roses at the mounting points, which suits a finished storefront or office door. For heavy traffic openings, Ives offers heavy duty straight pulls: the 8103HD, a 1 inch round bar with through bolt mounting, and the 8102HD, a 3/4 inch round bar with 1-1/2 inch clearance. The Ives 8145EZHD is a 45 degree offset pull described as ADA compliant, and the 8169 is a C style offset pull in 1 inch diameter with heavy duty mounting. These are plain bar profiles rather than decorative.

Seven finishes: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome and 626 satin chrome. For a building already standardized on satin chrome hardware, 626 is the usual match; 613 and 613E are both bronze but 613E is the darker, oxidized version, so order the same code across a project rather than mixing the two.

The 58 is a classic-style pull with decorative roses at the mounting points, so the escutcheon detail is part of the look. A straight bar pull like the Ives 8103HD, a 1 inch round with through-bolt mounting, or the ABH AB3300 flat end pull at 1 inch diameter, is purely functional with no decorative rose. Pick the 58 when the opening has traditional trim; pick a bar pull for utility and back-of-house doors.

The 58 is a single pull at 8 inch centers, so a door needing a pull on each face takes two. If you want a factory back-to-back set instead, Deltana offers pairs such as the OHP620 off-set handle pull back-to-back set and the SSPOBB24 24 inch back-to-back offset pulls. Note the 58 mounts thru-bolt as standard, which is what a back-to-back arrangement relies on.

The Trimco 58 Classic Pull is thru-bolt mounted as standard, with other mounting methods available. If you specifically want a factory back-to-back set, Deltana offers the OHP620 off-set handle pull as a back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick, the SSPOBB24 24 inch back-to-back modern offset pulls, and the SSPORBB24 24 inch back-to-back round offset pulls. Sure-Loc also lists the PL-2KN knurled long pull in a double-sided configuration.

No. The Trimco 58 Classic Pull is a commercial door pull at 8 inch center-to-center, gripped to open the door. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height in stainless steel, used at a rim cylinder on a night latch application. They serve different purposes and are not interchangeable.

The Trimco 58 Classic Pull is offered in plated and decorative finishes including 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome and 626 satin chrome. If you want solid stainless, the ABH AB7200 is a solid stainless steel flat end pull handle, 7/8 inch diameter, with through-bolt mounting. ABH also lists the AB3300 straight flat end pull at 1.00 inch diameter and the AB3310 offset flat end pull in surface mount.

It's classified as commercial hardware. The decorative rose styling reads residential, but the 58 is built for commercial door trim use, which makes it a common choice on office entries, hospitality suites and historic retrofits where a plain bar pull would look wrong.