Trimco APC11 1/2" Diameter Squ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$83.99
$72.82
Trimco Trimco APC11 1/2" Diameter Square Ends Architectural Pull TRI-APC11

Trimco APC11 1/2" Diameter Square Ends Architectural Pull

(No reviews yet) Write a Review

Model: TRI-APC11E-4-4.605
$83.99
$72.82
Selected Mounting is
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$83.99
$72.82
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

TRIMCO APC11 1/2" DIAMETER SQUARE ENDS ARCHITECTURAL PULL OVERVIEW

APC11 1/2" Diameter Square Ends Architectural Pull. 1/2" Diameter Square Ends.

Trimco’s APC10 Series Ladder style closet and cabinet pulls are precision crafted for beauty and ultimate durability. Offered with a multitude of material sizes, these pulls can be the architectural highlight of your design.

Buy the TRIMCO APC11 Series today to add a stylish hardware for your home!

TRIMCO APC11 DIAMETER SQUARE ENDS ARCHITECTURAL PULL PRODUCT FEATURES

  • Manufactured from stainless steel, bronze, brass or aluminum for long lasting durability.
  • Flexibility in design from material sizes and orientation to standoff locations (end or bridge).
  • Wide range of lengths available from 12″ to over 9′.
  • Additional options for door thickness, leather wrapping and engraving.
  • Available in most architectural finishes.
  • ADA Compliant.
  • Optional: Engraving for Singe Pulls or Back to Back (BTB) Pulls
  • Optional: Leather Wrapped
  • If a price is not shown for a particular finish, it may be available at the special price or by special quotation if quantaties warrant. Minimum quantities may apply.

TRIMCO APC11 SERIES COLOR VARIATIONS

Trimco APC11 1/2" Diameter Square Ends Architectural Pull Bright Brass (605)
Trimco APC11 1/2" Diameter Square Ends Architectural Pull Satin Brass (606)
Trimco APC11 1/2" Diameter Square Ends Architectural Pull Bright Bronze (611)
Trimco APC11 1/2" Diameter Square Ends Architectural Pull Satin Bronze (612)
Trimco APC11 1/2" Diameter Square Ends Architectural Pull Oil Rubbed Bronze (613)
Trimco APC11 1/2" Diameter Square Ends Architectural Pull Dark Oxidized Satin Bronze (613E)
Trimco APC11 1/2" Diameter Square Ends Architectural Pull Matte Black (622)
Trimco APC11 1/2" Diameter Square Ends Architectural Pull Satin Aluminum (628)
Trimco APC11 1/2" Diameter Square Ends Architectural Pull Bright Stainless Steel (629)
Trimco APC11 1/2" Diameter Square Ends Architectural Pull Satin Stainless Steel (630)

APPLICATIONS 

  • Commercial & Industrial Buildings
  • Government & Military Facilities
  • Hospitality
  • Multifamily & Mixed-Use
  • Retail & Strip Malls

TRIMCO APC10 SERIES COLLECTION

Trimco APC11 1/2" Diameter Square Ends Architectural Pull
Trimco APC12 5/8" Diameter Square Ends Architectural Pull

RESOURCES & DOWNLOADS

Manufacturer Resources

Product Specs

Commercial/Residential:
Commercial
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Series:
APC10 Series
Subcategory:
Door Pulls, Push and Pull Plates
Fasteners:
Wood and Machine Screws
Product Diameter:
1/2"
Product Dimension:
1/2" Diameter
Product Category:
Door Trim and Accessories
Product Substrate:
Stainless Steel
Department:
Door Hardware

Trimco TRI-APC11E-4-4.605 – Frequently Asked Questions

1) Will the Trimco APC11 pull work on a 1-3/8 inch door?
Yes. The APC11 ladder pull is ordered by door thickness, and 1-3/8 inch is one of the three choices along with 1-3/4 inch and 2 inch. Pick the one that matches the leaf you are mounting to, since the through-bolt hardware is sized to that thickness.
2) Is the Trimco APC11 pull ADA compliant?
Trimco lists the APC10 Series ladder pulls as ADA compliant. The 1/2 inch round bar is operable with a closed fist and no tight grasping or wrist twisting, which is what the requirement turns on.
3) What do I need to specify to order a Trimco APC11 correctly?
Four things: length (4 through 30 inches), door thickness (1-3/8, 1-3/4 or 2 inch), mounting style (E-Mount or G-Mount), and finish (one of ten, 605 through 630). Engraving and leather wrapping are add-on options on top of that. Miss the door thickness and the through-bolt hardware will not land right.
4) What is a heavier-diameter alternative to the Trimco APC11 pull for a high-traffic entrance?
The Trimco APC11 is a 1/2 inch diameter ladder-style pull with square ends, offered in sizes from 4 inch to 30 inch. For a thicker grip bar, the Ives 8103HD is a straight door pull using a 1 inch round bar at a heavy duty level, and the Ives 8102HD is a straight pull with a 3/4 inch round bar and 1-1/2 inch clearance. The ABH AB3300 is also a straight flat end pull at 1.00 inch diameter. Those larger bars fill the hand more on doors pulled constantly, while the APC11's 1/2 inch bar keeps a slimmer architectural profile.
5) I need an offset pull instead of a straight ladder pull - what should I look at?
The Trimco APC11 is a straight ladder-style pull with square ends and standoffs at the ends or as a bridge. If the opening calls for an offset shape, the Ives 8145EZHD is a 45 degree offset pull described as ADA compliant, the Ives 8169 is a C style offset solid pull at 1 inch diameter, and the ABH AB3310 is an offset flat end pull in a surface mount configuration. ABH also offers the AB3330 as an offset round end pull with custom length options. Offset pulls move the grip away from the door face, which suits doors where a hand needs clearance from a frame or adjacent glass.
6) What is the closest back-to-back pull set if I need both faces of the door done?
The Trimco APC11 is built in E-Mount and G-Mount configurations with door thickness options of 1-3/8 inch, 1-3/4 inch and 2 inch, and offers engraving for single pulls or back to back sets. If you want a factory-paired set, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset pull set and the Deltana SSPORBB24 is a 24 inch back-to-back round offset set. The Deltana OHP620 is an off-set handle pull back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick, and the Sure-Loc PL-2KN is a double-sided knurled long pull.
7) What lengths does the Trimco APC11 square-end pull come in?
Nine center-to-center sizes: 4, 5, 6, 8, 10, 12, 18, 24 and 30 inches. The short sizes suit cabinet and closet doors, the 18 to 30 inch range is what you would use on an entry or a full-height door leaf.
8) Can I match the Trimco APC11 to the bronze and black hardware already on my openings?
Ten architectural finishes are offered: 605 bright brass, 606 satin brass, 611 bright bronze, 612 satin bronze, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 628 satin aluminum, 629 bright stainless and 630 satin stainless. Between 613, 613E and 622 you can pair it with most dark hardware suites, and 630 is the usual match for commercial stainless trim.
9) What fasteners come with the Trimco APC11 pull, and do I need anything else to install it?
Wood and machine screws are the mounting hardware for the APC11. Machine screws are for through-bolting or tapped metal doors, wood screws for wood substrates. Because the pull is ordered to a specific door thickness, no extra sleeves or spacers are needed as long as the thickness you ordered matches the door.
10) Can the Trimco APC11 be ordered back to back on a glass or full-height door?
Yes. Trimco offers the APC10 Series pulls as single or back-to-back (BTB), and engraving is available on either arrangement. Leather wrapping is another option on the bar. Back to back is the normal choice on a swinging entry leaf where you need a pull on both faces.
11) How is a Trimco APC11 ladder pull different from an offset pull like the Ives 8145 or Deltana SSPOBB24?
The APC11 is a straight square-end ladder bar on standoffs, mounted parallel to the door edge, ordered in 4 to 30 inch lengths. An offset pull bends the grip away from the door face: the Ives 8145EZHD is a 45 degree offset, the Ives 8169 is a C style offset at 1 inch diameter, and Deltana's SSPOBB24 is a 24 inch back-to-back modern offset set. Offsets give more knuckle clearance and are common on exit doors; the straight ladder is the cleaner architectural look and matches contemporary storefront and millwork.
12) Can I get a Trimco APC11 longer than 30 inches for a tall entry door?
Trimco makes the APC10 Series in lengths from 12 inches to over 9 feet, though the standard stocked sizes top out at 30 inches. Anything beyond that is a special length order. If you need a long bar off the shelf instead, the ABH AB3330 series is offered with custom length options.
13) What is a simpler single-sided pull if I do not need the Trimco APC11's finish and mounting options?
The Trimco APC11 is ordered across ten finishes from 605 Bright Brass through 630 Satin Stainless Steel, two mounting styles and nine lengths, which is a lot of configuration for a straightforward opening. For a more direct pick, the Sure-Loc PL-1RD is a round long pull, single-sided, with concealed or thru-bolt mounting, the Sure-Loc PL-1KN is a knurled single-sided pull with thru-bolt mounting, and the Deltana SSP1210 is a 12 inch contemporary pull for a single side.
14) Is the Cal-Royal PUL-175 a substitute for the Trimco APC11?
No. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch in height, in stainless steel - it is the small pull that mounts around a rim cylinder on a night latch application, not a grab bar for opening a door. The Trimco APC11 is a 1/2 inch diameter ladder pull in lengths from 4 inch to 30 inch. If you are replacing a full-length pull, the PUL-175 will not serve.
15) Which pull should I use if the spec calls for through-bolt mounting?
The Trimco APC11 ships with wood and machine screws and is configured as E-Mount or G-Mount against a stated door thickness. Where the drawing calls out through-bolting, the ABH AB7200 is a solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting, the Ives 8103HD is a 1 inch round straight pull with through bolt mounting, and the Sure-Loc PL-1RD offers concealed or thru-bolt mounting.
16) What is the Trimco APC11 made of?
Stainless steel is the listed substrate, and Trimco also produces the APC10 Series bars in bronze, brass and aluminum depending on the finish specified. Stainless is the one to take for exterior or coastal openings and for washdown areas in healthcare and food service.
How fast can I get the Trimco TRI-APC11E-4-4.605 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-APC11E-4-4.605 come with a warranty?
Absolutely. The Trimco TRI-APC11E-4-4.605 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-APC11E-4-4.605?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-APC11E-4-4.605 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!