You may also like
TRIPLEX SPLICE CON. No6 TO No4 ACSR
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Number Of Conductors:
- 2
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Splice Service Entrance
- Selling Unit Of Measure:
- each
- Type2:
- Wire or cable compression splice
- Department:
- Electrical
- Product Subgroup:
- Splices
- Product Size:
- 4.315 inches
- Installation Category:
- None
Blackburn TR613 – Frequently Asked Questions
1) What wire sizes does the Blackburn TR613 triplex splice connector handle?
The TR613 is a triplex service entrance splice sized for No. 6 through No. 4 ACSR conductor. It is a compression connector, so it is crimped onto the conductor with a compression tool rather than bolted or set-screwed.
2) Is the Blackburn TR613 splice insulated, or do I need to cover it after crimping?
It is a bare compression splice with no insulation on the body, so the joint has to be insulated in the field. Plan on tape, a heat shrink sleeve, or a cover appropriate for the service voltage once the crimp is made.
3) Can I use the TR613 on stranded copper service entrance cable instead of ACSR?
The TR613 is specified for No. 6 to No. 4 ACSR, aluminum conductor steel reinforced. Compression splices are sized to the exact conductor construction they are stamped for, and ACSR has a steel core that changes the effective diameter versus copper or all-aluminum conductor of the same AWG. For copper or AAC service drop, use a splice rated for that conductor rather than this one.
4) How many conductors does the TR613 triplex splice join?
Two. The TR613 is a single two-conductor compression sleeve, one splice per connection point, so a triplex drop with two insulated phase legs plus the bare ACSR neutral messenger takes more than one connector to complete the run. Order by the count of joints you are actually making, since it sells as an each.
5) How long is the Blackburn TR613 splice body?
The connector measures 4.315 inches, which matters when you are checking clearance at the splice point and figuring how much conductor to strip and how much room you need between the crimp and the drip loop or the rack.
6) Where is the Blackburn TR613 splice connector made?
Manufactured in Mexico. The part number to specify on a submittal or purchase order is Blackburn TR613.
How fast can I get the Blackburn TR613 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn TR613 come with a warranty?
Absolutely. The Blackburn TR613 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn TR613?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn TR613 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.