You may also like
UNINS FLAG TERM, 12-10 AWG 1/4 BLT
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Flag Terminals
- Product Type:
- Non-Insulated Flag Terminal
- Wire Size:
- 2/0 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
Sta-Kon J671 – Frequently Asked Questions
1) What wire gauge and bolt size does the Sta-Kon J671 flag terminal take?
The J671 is sized for 12-10 AWG conductor and a 1/4 inch bolt or stud. Both of those have to match: crimping a 14 AWG wire in a 12-10 barrel gives you a loose, high-resistance joint, and a 1/4 inch tongue will not seat on a #10 stud without slop.
2) Is the Sta-Kon J671 insulated, and does that mean I need to sleeve it?
It is a non-insulated terminal, bare metal on the barrel and the tongue. If the connection sits where it could be touched or could short to an adjacent stud or a grounded enclosure wall, plan on heat shrink or an insulating cap over the barrel, or choose an insulated flag terminal in the same 12-10 AWG range instead.
3) Why use a flag terminal instead of a standard ring or fork terminal?
On a flag terminal the tongue comes off the side of the crimp barrel rather than in line with it, so the wire runs parallel to the terminal block or stud face instead of straight at it. That is what you want in a shallow panel, a tight motor connection box, or behind a contactor where there is no room to make the bend. If you have depth to work with, an in-line ring terminal on the same 12-10 AWG wire is simpler and cheaper.
4) Can I crimp this with regular pliers or do I need a Sta-Kon crimper?
Use a proper ratcheting crimp tool with a non-insulated terminal die in the 12-10 AWG range. A non-insulated barrel is formed metal only, so the joint depends entirely on a correctly indented crimp; pliers deform the barrel without compressing the strands and the connection backs out or heats under load.
5) I am standardizing terminations across a building's control panels. What exactly do I order to repeat this one?
Order by manufacturer part number J671, Sta-Kon brand. It is a single-configuration item, one model, so there is no finish, pack, or gauge option to specify: the part number alone pins down the non-insulated flag body, the 12-10 AWG barrel, and the 1/4 inch bolt tongue. For other gauges or stud sizes on the same panels you move to a different number in the series.
6) Is the Sta-Kon J671 made in the USA? I have a domestic-sourcing requirement on this job.
Country of origin on the J671 flag terminal is the United States. That is the detail institutional and government buyers working to a domestic-preference clause usually have to document, so it is worth capturing on the submittal with the part number.
How fast can I get the Sta-Kon J671 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon J671 come with a warranty?
Absolutely. The Sta-Kon J671 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon J671?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon J671 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.