You may also like
UNINS FLAG TERM 22-14 No10
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Flag Terminals
- Product Type:
- Non-Insulated Flag Terminal
- Standards:
- UL E9809
- Wire Size:
- 22-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon AB53 – Frequently Asked Questions
1) What wire sizes does the Sta-Kon AB53 flag terminal accept?
The AB53 flag terminal crimps onto 22 through 14 AWG conductors, so one part covers everything from small control and signal wire up to 14 AWG branch wiring. If your conductor is 12 AWG or larger, this is the wrong barrel size and you need a heavier terminal.
2) Why use a flag terminal instead of a standard ring terminal?
On a flag terminal the wire barrel sits at a right angle to the tongue, so the conductor runs parallel to the mounting surface instead of straight out from it. That is what you want in a shallow enclosure, a crowded terminal block, or against a motor or panel wall where a straight ring terminal would force a tight bend in the wire. If you have room for the wire to come off the stud in line, a plain ring terminal is the simpler choice.
3) Is the Sta-Kon AB53 insulated?
No. It is a bare, non-insulated copper terminal with no sleeve or color band. If the connection needs covering, you add heat shrink or an insulating cap yourself, and you will not get the wire-size color code that insulated terminals give you, so label or track your sizes on the job.
4) Will the AB53 work on aluminum conductors?
No. The AB53 is a copper terminal intended for copper conductors. Aluminum wire needs a terminal rated AL or AL9CU with the proper inhibitor compound, otherwise you get a corroding, high-resistance joint.
5) Is the Sta-Kon AB53 made in the USA?
Yes, country of origin is the United States, which matters if you are filling a government, transit, or institutional order with domestic sourcing language in the spec.
6) What is the manufacturer part number for this Sta-Kon flag terminal?
Order it as Sta-Kon AB53. That single MPN covers the 22-14 AWG, No. 10 stud, non-insulated flag configuration, so there are no finish or size options to specify alongside it.
How fast can I get the Sta-Kon AB53 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon AB53 come with a warranty?
Absolutely. The Sta-Kon AB53 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon AB53?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon AB53 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.