You may also like
Viega ProPressG tee - 23348
Manufacturer Resources
Product Specs
- Application:
- Commercial; Residential
- Connection Type:
- P1 x P2 x P3
- Material Type:
- Copper
- Product Dimension:
- 1-1/2'' x 1-1/2'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 4173
- Product Height:
- 3191
- Product Weight:
- 809
- Product Width:
- 175
- Product Material:
- Copper
Viega 23348 – Frequently Asked Questions
1) What pipe does the Viega ProPressG 23348 tee connect to?
The fitting body is copper and all three ends are press sockets, so it goes onto copper tube of the matching nominal sizes: 1-1/2 inch on the two run ends and 3/4 inch on the branch. You need a press tool with jaws for both 1-1/2 inch and 3/4 inch to complete all three joints.
2) Does the Viega 23348 tee need soldering, or is it a press fitting?
It presses. All three ends are press connections (P1 x P2 x P3), so the joint is made cold with a press tool and jaws sized to the fitting. No flame, flux, or solder, which matters on occupied buildings and on gas work where hot work permits are a problem.
3) Can I use this Viega tee on a commercial job, or is it residential only?
Both. The 23348 ProPressG tee is rated by Viega for commercial and residential applications, so it is equally at home on a multi-family riser branch or a single-family run.
4) What is the difference between ProPressG and standard ProPress fittings?
ProPressG is Viega's gas line press system; standard ProPress is for water and hydronic service. The sealing element is what differs, which is why the two are not interchangeable even though the fitting bodies look similar and both press with the same style of tool. Order 23348 when the branch is on a fuel gas line.
5) Is the Viega 23348 tee made in the USA?
No. The 23348 ProPressG tee is manufactured in Germany. If your spec or procurement rules call for domestic origin, this fitting will not satisfy it.
6) How do I order the right Viega ProPressG reducing tee by part number?
Call it out as Viega ProPressG tee 23348, 1-1/2 x 1-1/2 x 3/4. The manufacturer part number is 23348 and that single number pins the configuration, so there is no finish, handing, or sealing option to specify on top of it.
How fast can I get the Viega 23348 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 23348 come with a warranty?
Absolutely. The Viega 23348 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 23348?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 23348 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.