Modern Forms FM-W44815 Pi LED Round Flush Mount
This brand-new design in durable stainless steel handles the outdoor elements with ease, while the sleek polished hardware also gives interiors a welcome touch of industrial refinement. A user-friendly twist lock mechanism makes installation a snap. As for illumination, the finely crafted diffuser enhances the brightness for a beautiful mix of task and ambient light.- Available in a weather-resistant marine grade 316 stainless steel or a black powder coated finish with enhanced durability for outdoor applications. Can be used indoor or outdoor.
- Lightweight acrylic diffuser maximizes brightness with a smooth and even illumination. Easy installation of acrylic diffuser through a twist-lock mechanism (no visible hardware).
- AC LED technology - no driver or transformer required. Easily fits on a pancake junction box. 277V, 240V, or custom CCT options available by special order.
- Smooth and continuous dimming with an electronic low voltage (ELV) dimmer.
- High Powered Replaceable LED Module CRI: 90, Rated Hours: 54,000, Color Temp: 3000K or 3500K
- Standards: ETL, cETL & IP65 UL 1598 listed for wet locations.
Manufacturer Resources
Product Specs
- ADA Compliant:
- Yes
- Collection:
- Line Voltage Puck Light
- Hardwired or Portable:
- Portable
- Product Type:
- 120V Puck Light Accessory
- Warranty:
- 5 Years Functional, 2 Years Finish
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Accessories
- Base Material:
- Aluminum
- Location Rating:
- Damp
- Brand Family:
- WAC Limited
- CEC Listed:
- Yes
- Energy Star:
- No
- Wire Length:
- 12"
- Subcategory:
- Button Light
- Certification:
- ETL, cETL
- Location Indoor/ Outdoor:
- Indoor/Outdoor (Covered)
- Title 24 Compliant:
- Yes
- Segment:
- Lighting
- Product Length:
- 1.77"
- Mounting Method:
- Any
- Product Style:
- Functional
- Product Height:
- 4.33"
- Product Category:
- Task & Cove
- Product Width:
- 1.77"
WAC Lighting HR-IC12-BK – Frequently Asked Questions
1) How much run does the WAC Lighting HR-IC12 joiner cable add between two line voltage puck lights?
The HR-IC12 joiner carries 12 inches of wire, so it adds a foot of spacing between pucks in a run. That is the number to work from when you are laying out cabinet or cove segments: count the gaps between fixtures, not the fixtures, and order one joiner per gap.
2) Can the WAC line voltage puck light extension joiner be used in a damp location like a covered porch or a bathroom?
Damp locations, yes. The joiner cable is rated for damp use and for indoor or covered outdoor installation, which covers soffits, covered porches, and vanity or shower-adjacent cabinetry. It is not a wet location part, so keep it out of anywhere exposed to direct rain or spray.
3) Will WAC line voltage puck lights with these joiner cables pass a California Title 24 inspection?
The accessory is both Title 24 compliant and CEC listed, so it does not put a California job offside on the lighting side. It also carries ADA compliance, which matters on institutional and multi-family work where the cabinet and task lighting package gets reviewed as a whole.
4) Do I need an electrician to add a joiner cable to a WAC line voltage puck light run, or is it plug-together?
The joiner is a portable, plug-together interconnect, not a hardwired component, so extending an existing puck run with one is not an electrical rough-in task. The supply end of the run is what determines whether you need a licensed electrician; the joiner itself just lengthens the gap between fixtures.
5) Is the WAC puck light joiner cable ETL listed for a commercial spec job?
ETL and cETL, which covers both US and Canadian work. If your submittal package calls for a listed interconnect on the task and cove lighting, those are the marks to reference. Energy Star does not apply to this accessory.
6) How much clearance do I need behind the cabinet for the WAC 12 inch puck light joiner?
The joiner is listed at 4.33 inches high by 1.77 inches long by 1.77 inches wide, so the connector end needs a pocket roughly two inches across. Mounting method is open, so it can be run flat against a shelf underside, up a cabinet gable, or through a back panel, whichever keeps the 12 inches of wire from bunching.
7) What is the WAC HR-IC12 puck light joiner made of, and will it hold up under a cabinet that gets heat and cleaning?
Aluminum base material on the joiner body. That is the reason it takes a damp rating and covered exterior use rather than being limited to dry interior cabinetry, and it is the more durable choice for MRO and hospitality work where the underside of a cabinet gets wiped down regularly.
How fast can I get the WAC Lighting HR-IC12-BK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting HR-IC12-BK come with a warranty?
Absolutely. The WAC Lighting HR-IC12-BK is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting HR-IC12-BK?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting HR-IC12-BK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.