WAC Lighting 19.06" Slim Night...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$196.00

WAC Lighting 19.06" Slim Nightstick LED Bathroom Vanity or Wall Light WS-35819

(No reviews yet) Write a Review

Model: WAC-WS-35819
From the Nightstick Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$196.00
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

WAC Lighting 19.06" Slim Nightstick LED Bathroom Vanity or Wall Light WS-35819

A slender bar of light available in a variety of lengths from very short (1.5 feet) to very long (over 8 feet) gives you multiple mounting options for a clean and consistent lighting scheme no matter the size of your environment. Energy efficient integrated LED's provide a long-lasting maintenance-free bright and even illumination.
  • Aluminum construction with a co-extruded acrylic diffuser for bright and even illumination. Decorative plate included for installation over a standard 4in Junction Box.
  • Can be mounted vertically, horizontally, at an angle or on ceiling. Multiple size options available.
  • 120V AC LED Technology, no transformer or driver needed. Specially rated for installation in closets.
  • Smooth and continuous dimming with an electronic low voltage (ELV) dimmer.

Manufacturer Resources:

Specification Sheet

Installation Guide

Manufacturer Resources

Product Specs

Bulb Base:
Integrated LED
Bulbs Included:
Yes
Collection:
Nightstick
Dimmable:
ELV
Hardwired or Portable:
Hardwired
Lumens:
1276
Product Type:
Vanity Light
Shade/Glass Description:
Co-Extruded White Acrylic Diffuser
Warranty:
5 Years Functional, 2 Years Finish
Product Group:
Lighting
Product Subgroup:
Light Fixtures
ADA Compliant:
Yes
Number of Bulbs:
1
Avg Rated Hours:
54000
Base Material:
Aluminum
Location Rating:
Damp
Brand Family:
WAC Standard
Backplate Length:
19.06"
Energy Star:
No
Title 20:
Yes
Subcategory:
Indoor Wall Lighting
Certification:
ETL, cETL, IP44
Glass Finish:
Co-Extruded White Acrylic Diffuser
Location Indoor/ Outdoor:
Indoor/Outdoor (Covered)
Shade Material:
Acrylic
Title 24 Compliant:
Yes
Bulb Type:
Integrated LED
Segment:
Lighting
Product Voltage:
120V
Beam Spread Angle:
Flood
Light Temperature:
3000K
Mounting Method:
Wall;Up/Down
Product Style:
Contemporary
Product Height:
1.31"
Product Category:
Wall Lighting
Product Width:
19.06"
Product Wattage:
17W
Department:
Electrical

WAC Lighting WAC-WS-35819 – Frequently Asked Questions

1) Will the WAC Nightstick WS-35819 mount over an existing 4 inch junction box in my vanity wall?
Yes. The Nightstick bar ships with a decorative plate for installation over a standard 4 inch junction box, so a typical existing vanity rough-in works without moving the box. It is a hardwired fixture on 120V, and the bar itself measures 19.06 inches across the backplate with a 1.31 inch projection off the wall.
2) Can the WS-35819 LED bar be installed vertically alongside a mirror instead of horizontally above it?
It can. The Nightstick bar is designed to mount vertically, horizontally, at an angle, or on the ceiling, so you can flank a mirror with a pair or run one above it. Mounting is wall-type with up/down orientation supported.
3) Is the WAC Nightstick WS-35819 rated for use inside a shower or a wet bathroom area?
It is damp location rated with an IP44 rating, which covers a bathroom with normal shower humidity and covered outdoor locations such as a soffit or porch ceiling. It is not a wet location fixture, so keep it out of direct spray inside a shower enclosure.
4) What dimmer do I need for the WAC WS-35819 vanity light, and will a standard incandescent dimmer work?
Use an electronic low voltage (ELV) dimmer. The 120V AC LED engine is onboard, so there's no separate transformer or driver to match, but a standard incandescent or TRIAC dimmer is not the specified control and you can get flicker or a limited dim range. With an ELV dimmer the output is smooth and continuous.
5) Does the WS-35819 meet ADA and California Title 24 requirements for a commercial restroom?
Yes to both. It is listed as ADA compliant, and it carries Title 24 and Title 20 compliance for California projects. It is ETL and cETL listed for US and Canadian installs. Note that it is not Energy Star rated, if your spec calls for that specifically.
6) Can I use this WAC Nightstick bar as a closet light where code restricts fixture type?
Yes, the Nightstick is specifically rated for installation in closets. The sealed acrylic diffuser and low profile (1.31 inch off the wall) are what make that work, since there is no exposed lamp and no bulb to change.
7) How much light does the 19 inch WAC WS-35819 put out, and is one enough over a bathroom vanity?
The 19.06 inch Nightstick draws 17W and delivers 1276 lumens at 3000K with a flood distribution, so it reads as warm white and spreads evenly rather than spotting. For a single-sink vanity one bar above the mirror is typically adequate; for a double vanity or for shadow-free face lighting, most spec writers run two units vertically at the sides of the mirror instead.
8) What finishes does the WAC Nightstick WS-35819 come in, and can I get a different color temperature?
Two finishes: Brushed Aluminum (WS-35819-AL) and White (WS-35819-WT). Both are 3000K warm white; the Nightstick in this length is a single color temperature fixture, so if your project standardizes on 2700K or 3500K this is not the one to spec.
9) I need to light several rooms of different sizes with a matching linear fixture. Does the Nightstick come in other lengths than 19 inches?
Yes. The Nightstick line runs from about 1.5 feet up to over 8 feet, so you can carry one look across a powder room, a long vanity, and a corridor using the same profile and finish. The 19.06 inch version is the short end of that range.
10) Is there a lamp to replace in the WAC WS-35819, and what is the rated life?
No lamp to replace. The LED is integrated into the extruded aluminum body and included, rated for 54,000 average hours. For an MRO or multi-family fleet that means no relamping cycle, but end of life means replacing the whole fixture.
How fast can I get the WAC Lighting WAC-WS-35819 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-WS-35819 come with a warranty?
Absolutely. The WAC Lighting WAC-WS-35819 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-WS-35819?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-WS-35819 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.