You may also like
SATCO Lighting S11844 7W, 4in, Deep Baffle, CCT-Selectable Recessed LED Downlight
Model: SATCO-S11844
SATCO Lighting S11844 7W, 4in, Deep Baffle, CCT-Selectable Recessed LED Downlight7 Watt - 4 inch - Deep Baffle - CCT-Selectable Recessed LED DownlightWarranty: 5 Year Limited - FixturesDimensions:...
Satco Lighting
$17.07
WAC Lighting Pop-in 4in 5-CCT Selectable LED Recessed Downlight, 12W 1080 Lumens
WAC Lighting's Pop-in 4in 5-CCT Selectable LED Recessed Downlight is a low-profile, shallow-regressed recessed downlight with a driver and electrical connection junction box attached directly to the fixture for an easy installation. This 12W high-powered LED module delivers 1,080 lumens at 90 CRI with a 50,000-hour rated life, and an on-board 5-CCT selectable switch toggles between 2700K, 3000K, 3500K, 4000K, and 5000K color temperatures. The fixture installs in a 4in cutout on ceilings between 0.5in and 1.5in thick, pairs a die-cast aluminum housing with a frosted TIR lens, and is ETL & cETL UL #1598 Listed for Dry, Damp, and Wet locations.
Key Features
- Trade Size: Installs in a 4in cutout for ceiling thicknesses between 0.5in and 1.5in, with retention clips holding the light engine securely in place.
- Durable Construction: Die-cast aluminum housing with a frosted TIR lens; the regressed lens design reduces glare while delivering powerful ambient illumination.
- 5-CCT Selectable Switch: Toggle between 2700K Warm, 3000K Warm White, 3500K White, 4000K Cool White, and 5000K Natural White, accessible before, during, or after installation by removing the twist-lock diffuser.
- Light Output: High-powered LED module delivers 1,080 delivered lumens at 90 CRI with a 50,000-hour rated life.
- Universal Voltage: Universal input driver operates on 120V-220V-277V for flexible electrical compatibility across projects.
- Smooth Dimming: Compatible with ELV dimmers (dims down to 10%) and TRIAC dimmers (dims down to 5%) for smooth, continuous dimming.
- Integrated Junction Box: Electrical connection junction box is attached to the fixture with 5 convenient knockouts, simplifying wiring on the job.
- Concealed Diffuser: Frosted acrylic diffuser conceals the internal CCT selector switch and driver components for a clean finished look.
Certifications & Compliance
- ETL & cETL UL #1598 Listed for Dry, Damp, and Wet Locations
- Airtight and IC-Rated for direct contact with insulation
- CEC and Title 24 JA8-2016 Compliant
Technical Specifications
- Bulb Base: LED Module - Universal Driver
- Bulbs Included: Yes
- Dimmable: ELV;TRIAC
- Energy Star: No
- Hardwired or Portable: Hardwired
- Number of Bulbs: 1
- Product Type: Recessed Lighting Kit
- Safety Rating: ETL, cETL, CSA CAN, Title 24, Energy Star
- Shade/Glass Description: Frosted Acrylic Diffuser
- Warranty: 5 Years Functional, 2 Years Finish
- Subcategory: 4" LED Kit
- Beam Spread: Flood
- Voltage: 120-240-277
- Country of Origin: Thailand
- Location Rating: Wet
- Total Wattage: 12
- Color Temperature: 2700-3000-3500-4500-5000
- Style: Functional
Typical Applications
- Residential and Commercial Ceiling Lighting
- New Construction Installations with Exposed Rafters
- Remodel and Renovation Projects
- Wet and Damp Location Applications such as Covered Outdoor Areas and Bathrooms
- Ambient and General Illumination
Why WAC Lighting?
WAC Lighting engineers the Pop-in Series with a die-cast aluminum housing, an integrated driver and junction box, and ETL & cETL listing for Dry, Damp, and Wet locations, delivering reliable, code-compliant performance for professional lighting installations. The 5-CCT selectable switch and universal 120V-220V-277V driver give installers flexibility across a wide range of residential and commercial projects, backed by a 5-year functional and 2-year finish warranty.
Manufacturer Resources
Specification Sheet
Product Specs
- Bulb Base:
- LED Module - Universal Driver
- Bulb Shape:
- LED Module
- Bulbs Included:
- Yes
- Collection:
- Pop-in
- Dimmable:
- ELV;TRIAC
- Energy Star:
- No
- Hardwired or Portable:
- Hardwired
- Number of Bulbs:
- 1
- Product Type:
- Recessed Lighting Kit
- Safety Rating:
- ETL, cETL, CSA CAN, Title 24, Energy Star
- Shade/Glass Description:
- Frosted Acrylic Diffuser
- Subcategory:
- 4" LED Kit
- Avg Rated Hours:
- 50000
- Beam Spread Angle:
- Flood
- Product Voltage:
- 120-240-277
- Product Material:
- Aluminum
- Location Rating:
- Wet
- Total Wattage:
- 12
- Light Temperature:
- 2700-3000-3500-4500-5000
- Product Style:
- Functional
- Mounting Method:
- Ceiling
- Department:
- Electrical
WAC Lighting R4DSDR-F9CS-BK – Frequently Asked Questions
1) What size hole does the WAC Pop-in 4 inch recessed downlight need, and how thick can the ceiling be?
The Pop-in 4in downlight drops into a 4 inch cutout and is built for ceiling material between 0.5 inch and 1.5 inch thick. Retention clips hold the light engine against the ceiling, so there is no housing or can to frame in. If your ceiling is thicker than 1.5 inches, this fixture is the wrong choice.
2) Can I put this WAC Pop-in downlight in a shower or a covered porch?
Yes. The Pop-in 4in LED downlight is ETL and cETL UL #1598 Listed for Dry, Damp, and Wet locations, so covered outdoor ceilings, soffits and bathroom installations are all within rating.
3) Is the WAC Pop-in 4in downlight IC rated for contact with attic insulation?
It is airtight and IC-rated, so insulation can sit directly against it. That also means it can go in an insulated ceiling without a standoff box, and it is CEC and Title 24 JA8-2016 compliant for California work.
4) Do I need a separate junction box for the WAC Pop-in recessed light?
No separate box is needed. The driver and an electrical connection junction box come attached to the fixture, and the box has 5 knockouts for your feed and loop-through. It is a hardwired fixture, so the supply has to be run to the opening.
5) Will one part number work on 120V and 277V circuits in the same building?
Yes. The Pop-in uses a universal input driver rated 120V-240V-277V, so the same fixture can go on residential 120V branch circuits and 277V commercial lighting circuits. For a property manager standardizing across a portfolio, that means one stock item instead of two.
6) Can I change the color temperature after the Pop-in downlight is already installed in the ceiling?
Yes. The 5-CCT selector switch is reachable before, during or after installation by removing the twist-lock frosted diffuser. Settings are 2700K, 3000K, 3500K, 4000K and 5000K, so you can match a run of existing fixtures on site rather than ordering a specific Kelvin.
7) What dimmers work with the WAC Pop-in 4in LED downlight?
ELV and TRIAC dimmers. On an ELV dimmer it takes the output down to 10 percent; on TRIAC it goes to 5 percent. Match the dimmer type to the driver or you will get flicker or a dead band at the bottom of the slider.
8) How much light does a 12W Pop-in 4 inch downlight actually put out, and is it enough for general room lighting?
1,080 delivered lumens from a 12W LED module at 90 CRI, with a flood beam spread. That is a general ambient output suited to kitchens, corridors and living spaces rather than tight accent work. Rated life is 50,000 hours.
9) Is the WAC Pop-in suitable for a remodel where I can't get above the ceiling?
That is its main use case. It is a low-profile, shallow-regressed canless downlight: no housing to hang, the driver and junction box ride on the fixture, and clips grip a 0.5 to 1.5 inch ceiling from below. It also works in new construction with exposed rafters where plenum depth is limited.
10) What finishes and pack sizes does the WAC Pop-in 4in downlight come in?
Trim finish is Black or White. Black is sold as a single; White is available as a single, a 4 pack, or a 12 pack, which is the practical way to buy it when you are doing a whole floor or a unit turnover.
11) Will the Pop-in downlight glare in a low ceiling?
The lens is regressed behind a frosted TIR lens with a frosted acrylic diffuser, which pulls the bright source back from the ceiling plane and cuts direct glare. The housing itself is die-cast aluminum, which also helps the LED run cool.
How fast can I get the WAC Lighting R4DSDR-F9CS-BK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting R4DSDR-F9CS-BK come with a warranty?
Absolutely. The WAC Lighting R4DSDR-F9CS-BK is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting R4DSDR-F9CS-BK?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting R4DSDR-F9CS-BK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.