Washers 1/4 Channel SS (Jar 50)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 7.25 in
- Product Height:
- 3.25 in
- Product Material:
- Stainless Steel
- Product Weight:
- 6.43 lbs
- Product Width:
- 6.75 in
Metallics MSCW14SS – Frequently Asked Questions
1) What size channel hardware do Metallics MSCW14SS channel washers fit?
The MSCW14SS is a 1/4 inch channel washer, so it pairs with 1/4-20 channel nuts, bolts and rod used in strut channel runs. The washer seats in the channel to spread the load of the bolt head against the strut lip.
2) Are these channel washers stainless steel or plated steel?
Stainless steel, not zinc-plated. That matters on outdoor strut runs, rooftop mechanical supports, wash-down areas and anywhere a plated washer would rust out and stain the channel. Keep the rest of the joint (nut, bolt, channel) stainless too so you are not setting up dissimilar-metal corrosion.
3) How many washers come in the Metallics MSCW14SS jar?
Fifty washers per jar, packaged in a jar rather than a bag or box, which is why it stacks on a shelf on the truck and pours without spilling. The packed jar weighs 6.43 lbs.
4) What does a channel washer do that a flat washer does not?
A channel washer is shaped to bridge the open lips of strut channel so the bolt load bears on both edges instead of pulling the lip. A plain flat washer can slip into the slot or deform the channel edge under load. If you are bolting into a solid surface rather than channel, a flat washer is the right part.
5) Can I use these stainless channel washers for electrical conduit and cable tray support?
Yes. These are electrical-trade fasteners, used with 1/4 inch channel hardware on conduit racks, cable tray hangers and trapeze supports built from strut. Stainless construction suits damp, corrosive or exterior locations.
6) Will a jar of 50 channel washers fit in a van bin or shelf?
The jar measures 7.25 by 6.75 by 3.25 inches, so it drops into most standard van bins and parts-room shelving without being decanted.
How fast can I get the Metallics MSCW14SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MSCW14SS come with a warranty?
Absolutely. The Metallics MSCW14SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MSCW14SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MSCW14SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.