You may also like
Washers 1/4 X 1-1/4 Fender St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Country Of Origin:
- United States
- Division:
- Electrical H1
- Field Application:
- Larger Diameter For Greater Bearing Surface.
- Outside Diameter:
- 1/1/2004 IN
- Pack Type:
- Jar
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- Fender Washer
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Finish:
- Zinc Chromate
- Product Length:
- 3 in
- Product Height:
- 3.6 in
- Product Material:
- Steel Zinc
- Product Weight:
- 2.09 lbs
- Product Width:
- 3 in
Metallics JW116D – Frequently Asked Questions
1) What size bolt does the Metallics JW116D fender washer fit?
The JW116D is a 1/4 inch fender washer, so it goes over 1/4 inch bolts, screws, and threaded rod. The washer body itself is 1-1/4 inches across, which gives you a much wider bearing surface than a standard 1/4 inch flat washer.
2) Are Metallics JW116D washers OK for damp or outdoor electrical work?
They are zinc plated steel with a zinc chromate finish, which handles normal indoor and protected outdoor exposure. For sustained wet, coastal, or corrosive environments, spec stainless instead, since plated steel will eventually rust where the coating is scratched during install.
3) Can I use these fender washers for strut, hanger, and conduit support work?
Yes. 1/4 inch fender washers are a common electrical rough-in item for backing up 1/4 inch bolts and rod at hangers, brackets, and box mounts, and for covering oversized or slotted holes where the fastener head alone has too little bearing. Metallics catalogs the JW116D as an electrical fastener and calls out the larger diameter for greater bearing surface.
4) What part number do I order for 1/4 x 1-1/4 zinc fender washers from Metallics?
Order Metallics JW116D. That number covers the 1/4 inch by 1-1/4 inch zinc plated steel fender washer in the 100 piece jar; there are no finish or size options to choose beyond it.
5) How are the JW116D fender washers packaged, and how much does a pack weigh?
They ship 100 washers in a jar, and the jar weighs 2.09 lbs. The jar package is handy on a van or a shop shelf where a loose bag tears open, and 100 pieces is a sensible restock quantity for an MRO cart or a service truck.
6) Where are Metallics JW116D washers made?
The JW116D is made in the United States, which matters if you are buying against a domestic-preference spec on a government, institutional, or federally funded job.
How fast can I get the Metallics JW116D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JW116D come with a warranty?
Absolutely. The Metallics JW116D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JW116D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JW116D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.