You may also like
Washers 3/4 USS Flat St-zn (Box 1000)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Country Of Origin:
- MUL
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 7.25 in
- Product Height:
- 6 in
- Product Material:
- Steel Zinc
- Product Weight:
- 96.8 lbs
- Product Width:
- 6.25 in
Metallics WW85M – Frequently Asked Questions
1) What bolt size does the Metallics WW85M flat washer fit?
The WW85M is a 3/4 inch USS flat washer, so it goes over 3/4 inch bolts, anchors, and threaded rod. USS pattern means a larger outside diameter and a wider bearing surface than the SAE pattern of the same nominal size, which is what you want when you are clamping against strut, sheet metal, or wood rather than machined steel.
2) Are these washers zinc plated for damp or outdoor use?
Material is steel with zinc plating. Zinc gives ordinary corrosion protection for indoor and sheltered outdoor work, which covers most conduit support, strut, and panel mounting. For direct weather exposure, continuous wet locations, or coastal work, hot dip galvanized or stainless washers are the usual call instead.
3) How many washers come in a box of Metallics WW85M?
They ship 1000 washers to a box, packed as a box rather than a bag or carded pack. That is a bulk quantity aimed at shop stock or a job that is setting a lot of 3/4 inch hardware, not a one-off repair.
4) Should I use a USS flat washer or an SAE washer on 3/4 inch bolts?
Pick the USS 3/4 washer, like the Metallics WW85M, when the bolt bears on a softer or oversized-hole surface and you need to spread the load: strut, unistrut trapeze, wood blocking, sheet steel. SAE washers in the same 3/4 size are narrower in outside diameter and thinner, which suits tight counterbores and machined joints where a wide washer would overhang the seat.
5) How much does a box of 1000 of these 3/4 inch washers weigh, and what are the carton dimensions?
A full box runs 96.8 lbs, in a carton measuring 7.25 x 6.25 x 6 inches. Plan on a two-hand lift and a solid shelf; at that weight per box it is worth staging it near the work rather than carrying it up a ladder.
6) What part number do I order for a 3/4 inch USS zinc flat washer from Metallics?
Order Metallics WW85M. It is a single-configuration item, 3/4 USS flat, steel zinc, boxed 1000, so there is no finish or pack option to specify beyond the part number.
How fast can I get the Metallics WW85M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WW85M come with a warranty?
Absolutely. The Metallics WW85M is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WW85M?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics WW85M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.