You may also like
Washers 6 Flat Br (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Field Application:
- Metal to Metal
- Fits Bolt Size:
- #6 IN
- Inside Diameter:
- May-32 IN
- Outside Diameter:
- 8-Mar IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- Flat Washer
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 3 in
- Product Height:
- 2.15 in
- Product Material:
- Brass
- Product Weight:
- 0.1 lbs
- Product Width:
- 3 in
Metallics JSWBR6 – Frequently Asked Questions
1) What bolt size do the Metallics JSWBR6 flat washers fit?
They are sized for #6 screws and bolts. That is the smallest end of the common machine-screw range, so they suit #6 panel screws, small device screws, and light bracket work rather than anything larger.
2) Are the JSWBR6 washers solid brass or just brass plated?
Brass is the washer material itself, not a plating. For an electrician that matters in two ways: brass stays non-magnetic and it is a reasonable match where you are bearing against brass or bronze hardware and want to avoid a dissimilar-metal pair under the fastener head.
3) How many washers come in a jar of Metallics JSWBR6?
One hundred #6 brass flat washers, packed in a jar rather than a bag. The jar is the practical part for an MRO crib or a van drawer, since you can scoop a handful without the pack splitting open.
4) What is the JSWBR6 brass flat washer actually used for on a job?
It is called out for metal-to-metal applications: spreading the load of a #6 screw head against a metal panel, enclosure, strut fitting, or bracket so the head does not pull through or dig in. It is a plain flat washer, so it does no locking on its own. If the joint sees vibration, pair it with a lock washer or a thread-locking fastener.
5) Will a #6 brass flat washer work under a sheet metal screw in a steel enclosure?
Yes, as long as the screw is a #6. Bore size is what governs fit, and this washer is dimensioned for #6, so it seats under a #6 pan or hex head regardless of whether the screw is a machine screw or a sheet metal screw. For anything #8 or larger the hole is too small and the washer will not pass over the threads.
6) Are the Metallics JSWBR6 washers made to a dimensional standard?
They are built to ANSI washer dimensions, which is what lets you order them against a spec that calls for a #6 ANSI flat washer and expect a standard outside diameter and thickness rather than a proprietary size.
7) How much does a jar of 100 JSWBR6 washers weigh?
About 0.1 lbs. These are very small parts, so stocking several sizes across a service van costs essentially nothing in payload.
How fast can I get the Metallics JSWBR6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSWBR6 come with a warranty?
Absolutely. The Metallics JSWBR6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSWBR6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSWBR6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.