You may also like
Washers M6 Split Lock SS (Jar 50)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 3 in
- Product Height:
- 2.15 in
- Product Material:
- Stainless Steel
- Product Weight:
- 0.14 lbs
- Product Width:
- 3 in
Metallics JMLW6SS316 – Frequently Asked Questions
1) What size bolt does the Metallics JMLW6SS316 split lock washer fit?
It's an M6 split lock washer, so it pairs with M6 metric bolts and screws. If your hardware is imperial (1/4-20, for example), this is the wrong washer, metric and inch thread diameters are close but not interchangeable for a correct seat.
2) Should I use a split lock washer or a flat washer under an M6 nut?
Different jobs. A flat washer spreads load over the surface and protects soft material; a split lock washer like the JMLW6SS316 is a spring that bites the nut and the joint face to resist loosening under vibration. On equipment, enclosures, strut, or motor mounts that shake, you want the split lock. Where you need both load spreading and vibration resistance, run a flat washer against the material and the split lock against the nut.
3) Are these M6 lock washers stainless steel, and will they hold up outdoors?
The JMLW6SS316 washers are stainless steel, which is why they get specified for damp, washdown, and exterior work where a plain steel washer would bloom rust and seize the bolt. Pair them with stainless fasteners of the same family so you are not mixing dissimilar metals at the joint.
4) How many washers come in a jar of Metallics JMLW6SS316?
Fifty M6 stainless split lock washers per jar. The jar packaging is the reason these show up on service vans and in MRO cribs, the lid reseals so loose hardware doesn't end up loose in a drawer.
5) Can I use these stainless M6 lock washers on electrical enclosure and strut hardware?
That's the intended use. Metallics catalogues the JMLW6SS316 as an electrical fastener, and M6 stainless split locks are standard on enclosure doors, ground lug hardware, and channel-mounted equipment where vibration would otherwise back a nut off.
6) What is the shipping weight and jar size for a 50-count jar of M6 stainless lock washers?
The jar measures 3 x 2.15 x 3 inches and weighs 0.14 lbs. Small enough to live in a bin drawer or a van tray without eating shelf space.
How fast can I get the Metallics JMLW6SS316 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMLW6SS316 come with a warranty?
Absolutely. The Metallics JMLW6SS316 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMLW6SS316?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMLW6SS316 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.