Watco 14008 Drain Elbow

Watco 14008 Drain Elbow Fitting for Bath Waste Assemblies

The Watco 14008 Drain Elbow is a rough-in waste fitting designed to connect and redirect drain-line flow within a Watco bath or tub waste-and-overflow assembly. As a dedicated elbow component, it is installed behind the wall or beneath the fixture to change the direction of the waste run between the drain body and the downstream tubular waste piping, helping the installer route the assembly around framing, joists, or other obstructions that a straight run of pipe cannot clear. This is a trade part intended for use by a licensed plumber or contractor during new construction or remodel rough-in work, not a decorative or finish-side component. Because it is sold as a component of the broader Watco waste system, it is intended to be paired with the corresponding Watco drain body, overflow tube, and tubular waste fittings that make up a complete bath drain assembly.

Key Features

• Product Type: A dedicated drain elbow fitting used to change the direction of waste flow within a Watco bath drain assembly.
• System Component: Engineered to integrate with Watco tub and bath waste-and-overflow systems as a connecting fitting between the drain body and tubular waste run.
• Rough-In Application: Installed behind the wall or under the fixture during rough-in, allowing the installer to route waste piping around framing and other in-wall obstructions.
• Brand-Matched Fit: Manufactured by Watco for use with corresponding Watco drain components, supporting a consistent, purpose-built assembly rather than a generic universal fitting.
• Trade-Grade Part: Supplied as an individual replacement or rough-in stocking item for plumbers and contractors completing or servicing a Watco waste assembly.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Residential and Commercial Bath Drain Rough-In
• New Construction Tub and Shower Waste Assemblies
• Replacement or Repair of an Existing Watco Waste Assembly
• Routing Drain Piping Around Framing or Structural Obstructions
• Renovation Plumbing Where Existing Drain Layouts Must Be Redirected

Why Watco?

Watco is a recognized manufacturer of bath waste-and-overflow drain systems, and stocking brand-matched components like this drain elbow helps a plumber keep a Watco assembly consistent from the drain body through the tubular waste run. Using the manufacturer's own fitting for this connection point supports a proper, purpose-built fit with the rest of the Watco system during rough-in installation or service work. For contractors already running Watco drain assemblies, this elbow is a straightforward way to complete or repair the waste line without introducing a mismatched generic fitting into the run.