Watco Push-Pull Bath Waste Drain Assembly

Watco Push-Pull Bath Waste Drain Assembly

The Watco Push-Pull Bath Waste Drain Assembly is a trade rough-in plumbing component built for tub drain and overflow installations where a plumber needs a reliable stopper mechanism without electronic or lever-actuated overflow linkage. As a push-pull style bath waste, the stopper is operated by hand at the drain opening itself — pull up to open the drain, push down to seal it — which keeps the mechanism simple and reduces the moving parts that can fail or bind behind the tub wall compared to trip-lever or cable-actuated waste-and-overflow kits. This family is available across a range of finish and waste-assembly-material combinations, including Bronze with PVC Waste, Brushed Nickel, and Oil Rubbed Bronze with Flexible Waste, so a plumber or contractor can match the waste assembly to the drain finish and waste-material configuration specified on the job. This is a trade rough-in plumbing component intended for installation by a licensed plumber or contractor as part of a bathtub drain and overflow system, not a decorative accessory chosen for looks alone, though the exposed strainer and stopper finish will coordinate with matching bath trim where that finish is specified on the job.

Key Features

• Push-Pull Operation: the stopper is opened and closed by hand directly at the drain opening, eliminating the need for a trip-lever overflow plate or a separate rocker/cable mechanism inside the overflow tube.
• Finish and Material Options: available in Bronze with PVC Waste, Brushed Nickel, and Oil Rubbed Bronze with Flexible Waste, allowing the assembly to be matched to the job's specified bath trim finish and waste-material requirements.
• Bath Waste Assembly: designed as a tub drain waste component, installed behind the tub apron and connected to the tub's drain outlet during rough-in and finish plumbing.
• Simplified Mechanism: the push-pull design reduces the internal linkage found in trip-lever waste-and-overflow assemblies, which can simplify service and reduce points of failure over time.
• Watco Manufacturing: supplied by Watco, a manufacturer recognized in the plumbing trade for bath waste and drain products.

Technical Specifications

• Product Type: Bath Waste (Push-Pull Style)
• Configuration: Push-Pull Stopper Mechanism
• Finish and waste-assembly material vary by selected option (Bronze - PVC Waste, Brushed Nickel, Oil Rubbed Bronze - Flexible Waste); refer to the selected variant and manufacturer documentation for complete technical specifications, including thread size and overflow tube compatibility.

Typical Applications

• Bathtub Drain and Overflow Rough-In
• Residential Bathroom Remodel and New Construction
• Replacement of Existing Trip-Lever or Toe-Touch Bath Waste Assemblies
• Tub Trim-Out Matching Coordinated Fixture Packages Across Multiple Finishes

Why Watco?

Watco is a name plumbers and contractors recognize for bath waste and drain hardware, and this push-pull waste family continues that focus with a straightforward mechanical design offered across multiple finish and waste-material options to suit coordinated bath trim packages. Choosing a push-pull mechanism keeps the installation simple behind the tub wall, which can make service calls faster if the stopper ever needs attention down the road, regardless of which finish or waste-material configuration is selected for the job.