Watco Push-Pull Bath Waste Drain Trim Assembly

Watco Push-Pull Bath Waste Drain Trim Assembly

The Watco Push-Pull Bath Waste Drain Trim Assembly gives plumbers and contractors a simple, mechanical stopper-actuation option for tub and lavatory drain installations. As a Push-Pull configuration, the stopper is opened and closed by hand directly at the drain body itself, eliminating the need for a separate trip-lever, rotary, or cable-actuated overflow assembly. This line is available across several configurations — including the 500-PP-WI, 601-PP-NP, 38190-WI-2H, and FLEX924-PP-CP — giving installers flexibility to match a specific finish or drain-body style while keeping the same dependable Push-Pull actuation. This makes the family a straightforward retrofit or new-construction choice when a job calls for a mechanically simple, low-maintenance drain trim rather than a linkage-driven system.

Key Features

• Push-Pull Operation: The stopper is engaged and released directly by hand at the drain, giving a direct mechanical action with no external trip lever or waste-and-overflow linkage to align, adjust, or service.
• Drain Trim Assembly: Supplied as a trim-level component intended to pair with a compatible Watco drain body and waste line for a complete bath waste installation.
• Simplified Servicing: Because the Push-Pull mechanism relies on a single hand-actuated stopper rather than a rocker arm, lift rod, or cable, there are fewer moving parts behind the wall or under the tub to inspect, clean, or replace over the life of the installation.
• Multiple Configurations: Offered across models such as 500-PP-WI, 601-PP-NP, 38190-WI-2H, and FLEX924-PP-CP, helping installers cross-reference the correct stopper and trim components when specifying replacement or new-install hardware.
• Rough-In Compatible Design: Intended for use as part of a bath or lavatory waste and drain rough-in, connecting to the associated tailpiece and waste tubing supplied or specified for the installation.

Technical Specifications

• Actuation Type: Push-Pull
• Available Configurations: 500-PP-WI, 601-PP-NP, 38190-WI-2H, FLEX924-PP-CP
• Refer to manufacturer documentation for complete dimensional, material, and finish specifications for each configuration.

Typical Applications

• Residential Bathtub and Lavatory Waste Installations
• New Construction Bath Rough-In
• Drain Trim Replacement and Remodel Projects
• Retrofit of Trip-Lever or Linkage Drains to a Simplified Push-Pull Mechanism

Why Watco?

Watco is a recognized name among plumbing contractors for bath waste and drain trim hardware, and the Push-Pull mechanism used across this family reflects a design philosophy built around mechanical simplicity: fewer linkage parts behind the wall means fewer points of failure and an easier service call when a stopper needs attention. For plumbers specifying drain trim on a rough-in job, a direct-actuation Push-Pull assembly like those in the 500-PP-WI, 601-PP-NP, 38190-WI-2H, and FLEX924-PP-CP lineup offers a dependable alternative to lever-driven waste and overflow systems.