Watco 601 Series Push-Pull Bat...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$35.93
Image coming soon

Watco 601 Series Push-Pull Bath Waste Trim

(No reviews yet) Write a Review

Model: C38080-CP-2H

In Stock (leaves warehouse same day if ordered before 3pm ET)

$35.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Watco 601 Series Push-Pull Bath Waste Trim

The Watco 601 Series Push-Pull Bath Waste Trim is a finished-side trim kit designed to pair with a Watco 601 drain and overflow rough-in assembly for tub installations. Rather than a trip lever or toe-touch mechanism, this trim gives plumbers and contractors a simple push-pull control at the overflow faceplate to raise and lower the drain stopper. It is available in a choice of Trim Finish options — Chrome, Oil Rubbed Bronze, and White — so the visible overflow plate and stopper mechanism can be matched to the other bath fittings in the installation. As the finish-out component of the 601 platform, it installs after the tub is set and completes the visible portion of the waste and overflow assembly that was roughed-in earlier in the job.

Key Features

  • Push-Pull Operation: A push-pull mechanism at the overflow faceplate raises and lowers the drain stopper, giving installers a simple, low-maintenance control style for the finished bath waste assembly.
  • Selectable Trim Finish: Offered in Chrome, Oil Rubbed Bronze, or White so the finished trim can coordinate with other bath fittings in the same installation.
  • 601 Series Trim: Designed as the trim component of the Watco 601 waste and overflow platform, intended to be matched with the corresponding 601 rough-in assembly.
  • Finished-Side Component: Installs after the tub is set, completing the visible portion of the drain and overflow assembly that was roughed-in earlier in the job.
  • Consistent Trim Kit Match: Provides a uniform push-pull control and finish across the overflow plate and stopper mechanism for a clean, finished look.

Technical Specifications

  • Series: Watco 601
  • Operation Type: Push-Pull
  • Trim Finish Options: Chrome, Oil Rubbed Bronze, White
  • Refer to manufacturer documentation for complete technical specifications, including compatible drain body and overflow tube dimensions.

Typical Applications

  • Bathtub Waste and Overflow Trim Replacement
  • New Construction Bath Rough-In Finish-Out
  • Residential Bathroom Remodels
  • Matching Trim Upgrades for Existing 601 Series Waste Assemblies
  • Contractor and Plumber Installed Tub Trim Kits

Why Watco?

Watco is a long-established name in bath waste and overflow trim, and the 601 Series Push-Pull trim is built to complete a 601 waste assembly with a durable, coordinated finish and dependable push-pull operation. For plumbers and contractors finishing out a tub installation, this trim offers a straightforward, code-standard control mechanism paired with a finish choice that matches the rest of the bath fittings. Stock the Watco 601 Series Push-Pull trim alongside your rough-in waste and overflow bodies to keep finish-out jobs moving without a mismatched trim kit.

Manufacturer Resources

Product Specs

Product Type:
Bath Waste Trim
Configuration:
Push-Pull
Series:
601
Department:
Plumbing
Product Subgroup:
Drains and Cleanouts
list_batch:
WAO-20260924
Product Group:
Rough-In and Supports

Watco C38080-CP-2H – Frequently Asked Questions

1) Is the Watco 601 push-pull bath waste a complete drain assembly or just the trim?
Trim only. The Watco 601 Series Push-Pull Bath Waste Trim is the finished-side kit (overflow faceplate and stopper mechanism) and it pairs with a separate Watco 601 drain and overflow rough-in assembly. If you are plumbing a tub from scratch, you need the rough-in waste and overflow body as well; this part goes on after the tub is set.
2) Will the Watco 601 push-pull trim fit a trip lever or toe-touch waste and overflow body?
Don't count on it. This trim is built as the push-pull trim for the Watco 601 waste and overflow platform and is meant to be matched with the corresponding 601 rough-in. Swapping a push-pull face onto a trip-lever body changes the whole actuation method, since a trip lever works a plunger through internal linkage rather than a stopper at the drain. If your rough-in is not a 601, order the trim that matches the body you have.
3) Can I use this to replace just the worn overflow plate and stopper on an existing tub without opening the wall?
Yes, that is one of the intended uses. The 601 Series push-pull trim is the finished-side component, so a trim replacement or finish upgrade on an existing 601 waste and overflow assembly is done from the tub side with the rough-in left alone. It is specified to match the corresponding Watco 601 rough-in, so confirm what is behind the tub is a 601 body before you order.
4) What finishes does the Watco 601 push-pull tub trim come in, and can I match the rest of the bath fittings?
Three finishes: Chrome, Oil Rubbed Bronze, and White. The finish covers the visible overflow plate and stopper, so you can coordinate it with the tub filler and other bath fittings. Order by the finish code, Chrome is C38080-CP-2H, Oil Rubbed Bronze is 601-PP-BZ, and White is 500-PP-WH.
5) I manage apartments with a lot of tubs. Is push-pull a sensible standard to settle on across units?
It is a reasonable fleet choice. Push-pull puts the control at the overflow faceplate and is described as a simple, low-maintenance control style, with no trip lever linkage inside the overflow tube to fall out of adjustment. Standardizing on the Watco 601 push-pull trim in one finish, Chrome, Oil Rubbed Bronze, or White, also means one trim SKU on the truck for turns and make-readies, provided the units are roughed in with 601 bodies.
6) At what point in a new tub rough-in do I install the 601 push-pull trim?
Last. The waste and overflow body is roughed in before the tub goes in; this push-pull trim installs after the tub is set and finishes the visible part of the drain and overflow. For contractors that means the trim can be ordered and finish-selected later in the job, after the rough-in inspection is behind you.
How fast can I get the Watco C38080-CP-2H delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Watco C38080-CP-2H come with a warranty?
Absolutely. The Watco C38080-CP-2H is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Watco C38080-CP-2H?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Watco C38080-CP-2H from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!