Watco 901-LT-PVC Lift and Turn...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$96.83
Watco 901-LT-PVC Lift and Turn Bath Waste

Watco 901-LT-PVC Lift and Turn Bath Waste

(No reviews yet) Write a Review

Model: 901-LT-PVC-BB

In Stock (leaves warehouse same day if ordered before 3pm ET)

$96.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Watco 901-LT-PVC-NP Trip Lever Bath Waste with PVC Tubular, Nickel

The Watco 901-LT-PVC-NP is a trip lever bath waste and overflow assembly built with PVC tubular waste components and finished in nickel where visible. Designed for behind-the-wall rough-in and finish-out of bathtub drain systems, this Watco bath waste pairs a trip lever style overflow control with PVC tubular drain piping, giving plumbers and contractors a straightforward, code-familiar waste assembly to install on new construction or renovation tub installs. The PVC tubular construction is lightweight and easy to cut and fit during rough-in, while the nickel-finished trim components are intended for the portions of the assembly that remain visible after the tub is set. As with all tubular bath waste kits, this assembly is intended to be installed by a licensed or experienced plumbing professional, following the tub manufacturer's overflow location and the local plumbing code requirements for the jobsite.

Key Features

  • Trip Lever Operation: This Watco bath waste uses a trip lever style stopper mechanism, a common configuration for bathtub waste and overflow assemblies that plumbers regularly install and service.
  • PVC Tubular Construction: The tubular waste and overflow tube sections are PVC, offering a lightweight, easy-to-cut material for fitting the assembly to the tub's drain and overflow openings during rough-in.
  • Nickel Finish: Exposed trim components carry a nickel finish, coordinating with the visible portion of the waste and overflow assembly once the tub is installed.
  • Bath Waste & Overflow Assembly: Configured as a complete bath waste kit, combining the drain waste tubing, overflow tube, and trip lever trim needed for a single bathtub installation.
  • Watco Model 901-LT-PVC-NP: Identified by Watco under this specific model designation for ordering, matching, and replacement purposes on the jobsite or in a plumbing supply house.

Technical Specifications

  • Model: Watco 901-LT-PVC-NP
  • Configuration: Trip Lever (LT)
  • Tubular Material: PVC
  • Finish: Nickel (NP)

Typical Applications

  • Bathtub Drain and Overflow Rough-In
  • Residential Bathroom Renovation and Remodel
  • New Construction Tub Installations
  • Bath Waste Replacement and Repair

Why Watco?

Watco is a recognized name in bath waste and overflow assemblies, and the 901-LT-PVC-NP combines a familiar trip lever configuration with PVC tubular construction and a nickel finish for a straightforward professional installation. For plumbers and contractors sourcing tub drain hardware, Watco offers a dedicated model number that keeps ordering and jobsite matching simple.

Manufacturer Resources

Product Specs

list_batch:
WAO-20260924
Product Material:
PVC
Department:
Plumbing
Product Subgroup:
Pipe and Tubing
Product Type:
Bath Waste and Overflow Assembly
Product Group:
Rough-In and Supports

Watco 901-LT-PVC-BB – Frequently Asked Questions

1) Is the Watco 901-LT-PVC a complete tub drain kit or do I need to buy the overflow tube separately?
It ships as a complete bath waste and overflow assembly for one bathtub: the drain waste tubing, the overflow tube, and the finish trim. One kit covers one tub, so order per fixture. You will still need to cut the tubular sections to the tub's actual drain and overflow spacing on site.
2) Is the Watco 901-LT-PVC waste PVC or brass tubular?
PVC tubular. The waste and overflow tube sections are PVC, which cuts and fits fast during rough-in and keeps the assembly light. If your spec or local code calls for brass tubular waste on the job, this is not the model to order.
3) What finish options does the Watco 901-LT-PVC bath waste come in?
The Watco 901-LT-PVC bath waste is offered in seven finish codes: BB, BN, BZ, CP, NP, WH and WI. The NP version is nickel, and the finish applies to the exposed trim components that stay visible once the tub is set, so pick the code that matches the tub filler and other bathroom trim on the job.
4) Can I use a Watco 901 bath waste on a tub I am replacing, or is it only for new construction?
Both. The 901-LT-PVC is used for new construction tub installs, bathroom remodels, and straight replacement or repair of a failed bath waste. Because the PVC tubular sections are cut to fit, it adapts to the drain and overflow spacing of the tub you are setting rather than one fixed length.
5) Do I need to follow the tub maker's overflow height when installing this Watco bath waste?
Yes. Set the assembly to the tub manufacturer's overflow location and to the local plumbing code for the jobsite. It is a behind-the-wall rough-in and finish-out assembly meant for a licensed or experienced plumber, since the tubular connections and overflow position are made before the tub is closed in.
6) If I am standardizing tub drains across a building, which Watco part number do I put on the order?
Order by the full model with the finish suffix, for example 901-LT-PVC-CP or 901-LT-PVC-WH. The base 901-LT-PVC designation is constant across all seven finishes, so a property manager or purchasing group can hold one model number for the building and vary only the suffix where trim finishes differ by unit.
How fast can I get the Watco 901-LT-PVC-BB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Watco 901-LT-PVC-BB come with a warranty?
Absolutely. The Watco 901-LT-PVC-BB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Watco 901-LT-PVC-BB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Watco 901-LT-PVC-BB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!