Watco 901-ZRI-PVC-CP Bath Waste Rough-In Kit, PVC Tubular with CP Trim
The Watco 901-ZRI-PVC-CP is a bath waste rough-in kit built around PVC tubular drain components, paired with CP (chrome-plated) trim hardware for the finished portion of the assembly. As a rough-in unit, it is designed to be installed behind the wall or beneath the tub before the finished trim is set, giving plumbers and contractors a PVC tubular waste path that mates to standard bathtub drain and overflow configurations. The model designation — 901 series, ZRI rough-in configuration, PVC tubular body, CP finish trim — identifies this as a trade rough-in product intended for new construction or remodel work where the tub waste and overflow run needs to be set prior to wall closure.
Key Features
- PVC Tubular Construction: The waste and overflow tubular components are PVC, a lightweight, corrosion-resistant material commonly used for tub drain rough-in runs.
- CP Trim Finish: Trim components carry a CP (chrome-plated) finish for the visible portion of the assembly once the tub surround is installed.
- Rough-In Configuration: The "ZRI" designation identifies this unit as a rough-in kit, meant to be set and connected to the tub drain and overflow openings ahead of finish work.
- Watco 901 Series: Part of Watco's 901 series bath waste line, sized and configured for standard bathtub drain and overflow rough-in applications.
- Behind-the-Wall Installation: Designed for installation by a licensed plumber or contractor during the rough-in phase of tub installation, not as a finished decorative assembly.
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Bathtub Waste and Overflow Rough-In
- Residential and Commercial Bathroom Remodel Plumbing
- New Construction Rough-In Plumbing
- Replacement of Existing Tub Waste Assemblies
Why Watco?
Watco is a recognized name in bath waste and overflow systems, and the 901-ZRI-PVC-CP pairs a PVC tubular rough-in body with CP trim components to give installers a straightforward path from rough-in to finished tub drain. For plumbers and contractors setting bathtub waste and overflow runs behind the wall, this configuration keeps the rough-in material (PVC) separate from the finish material (CP trim), simplifying planning for both the rough-in and trim-out phases of the job.
Manufacturer Resources
Product Specs
- list_batch:
- WAO-20260924
- Product Type:
- Bath Waste Rough-In Kit
- Product Finish:
- Chrome-Plated
- Series:
- 901
- Department:
- Plumbing
- Product Subgroup:
- Pipe and Tubing
- Product Material:
- PVC
- Product Group:
- Rough-In and Supports