You may also like
Weslock CASTLETOWN Handleset
If security, safety, and style are important to you, then Weslock is your choice for quality hardware for your home. Not only are Weslock door handle and deadbolt products strong and long lasting, but they also offer a beautiful aesthetic for your home. With designs that enhance the look and feel of your home and details, such as concealed installation screws, that merge function and form, Weslock offers a product unmatched by the competition.
Standard features
- 5-Pin Cylinder, Weslock keyway
- Exceeds ANSI A 156.2 Grade II Lock standards
- Solid Molten Brass
- 1” Throw bolt with two hardened steel rollers prevent sawing
- Removable knob/lever prevents scratching during installation
- Heavy Duty Security Strikes with 3” screws
- Fits doors prepared with 2-1/8” top (1-5/8“ optional) and 2-1/8” bottom cross holes and 1” edge hole
- 5-1/2” minimum center to center cross hole spacing
- Adjustable latches 2-3/8” or 2-3/4” with removable faceplates
- Optional door thickness up to 2-1/4”
- Adjusts to door thickness from 1-3/4” - 2”
- Limited Lifetime Mechanical Warranty
- Limited 10 Year Finish Warranty
Manufacturer Resources
Product Specs
- Product Group:
- Mechanical Locks
- Series:
- Molten Bronze
- Warranty:
- Limited Lifetime Mechanical and Limited 10 Year Finish
- Latch Faceplate:
- 1" x 2-1/4"
- Collection:
- Molten Bronze
- Cross Bore:
- 2-1/8"
- Keyed:
- Yes
- Product Subgroup:
- Bored Locksets
- Product Type:
- Interior Trim Only
- Subcategory:
- Residential Handlesets
- Keyed Function:
- Single Cylinder
- Commercial/Residential:
- Residential
- Cylinder and Keyways:
- 5 Pin Cylinder, Weslock Keyway
- Lock Function:
- Entry
- IMAP Policy:
- Yes
- Backset (Distance):
- 2-3/8 or 2-3/4
- Product Function:
- Single Cylinder
- Door Thickness Range:
- 1-3/8" to 2"
- Product Dimension:
- 18-1/2" x 2-3/4" with 2-3/4" Projection
- Door Strike:
- Round Corner Strike
- Product Style:
- Castletown
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Weslock 07400--F2SL20 – Frequently Asked Questions
1) Is the Weslock 7400 Castletown a complete handleset or just the inside trim?
Interior trim only. The 7400 Castletown with Wexford knob is the inside half that pairs with a Weslock exterior handleset: you get the inside knob, the deadbolt trim, the adjustable latch and the round corner strikes. If you are replacing a whole entry set, you need the outside handleset section as well.
2) Will the Weslock 7400 fit a 1-3/4 inch entry door, and what about a thicker one?
1-3/4 inch is the standard fit and the default configuration. The trim adjusts across a 1-3/8 to 2 inch range, and for anything heavier there is a 2 inch to 2-1/4 inch door thickness option to select at order. Pick the standard 1-3/4 to 2 inch setting for a typical commercial-grade residential entry door and the thicker option only for a genuine oversized slab.
3) Does the Weslock Castletown handleset trim work with a 2-3/8 backset or do I need 2-3/4?
Either. The latch adjusts between 2-3/8 and 2-3/4 inches, so one part covers both of the standard residential backsets and you do not have to know which one the door was bored for before ordering. The faceplates are removable, which lets you match a drive-in or a face-mounted prep on the door edge.
4) What door prep does the Weslock 7400 handleset need, and will it drop into an existing bored door?
It wants 2-1/8 inch cross bores top and bottom (the top hole can be 1-5/8 inch instead) with a 1 inch edge bore, and the two cross holes must be at least 5-1/2 inches center to center. A door already bored 2-1/8 inch for a standard knob and deadbolt will usually take it, but measure the center to center spacing first, since that is the dimension that stops a handleset from dropping in.
5) Can I get Weslock Castletown trim keyed alike with my other Weslock locks?
Yes. Keyed alike is one of the two keying selections made at order, alongside keyed different, and a key code can be supplied so the cylinder is cut to an existing Weslock key. The cylinder is a 5-pin on the Weslock keyway, so it keys with other Weslock cylinders, not with a Kwikset or Schlage keyway.
6) What is a comparable interior handleset trim pack if I am not on Weslock hardware?
Depends on what the outside handleset is, since inside trim only fits its own family. On Kwikset, the 966BRL Brooklane lever interior single cylinder trim is a Grade 2 entry pack, and the 966BRNL Breton lever on a square rose fits the Signature 687 and 800 series outside trim. On Schlage residential, the JH59 Broadway lever inside trim with Collins deadbolt thumbturn is Grade 3 and covers 1-3/8 to 1-3/4 inch doors, which is a narrower thickness range than the Weslock.
7) Is the Schlage F59 Accent or FC59 Alexandria interior pack a substitute for the Weslock 7400 Castletown trim?
Not on function. The Weslock 7400 Castletown is a single cylinder entry trim with a keyed 5 pin Weslock cylinder. The Schlage Residential F59 Accent lever interior pack and the FC59 Alexandria glass knob interior trim pack are both dummy function, meaning the interior grip does not operate a latch. The FC59 does include a deadbolt thumbturn. If you need a working interior knob or lever on the opening, the dummy trims will not do the job.
8) I need interior trim that includes a deadbolt thumbturn, not a single cylinder handleset trim. What should I order instead of the Weslock 7400?
The Weslock 7400 Castletown is single cylinder interior trim with the Wexford knob. If the opening needs interior trim paired with a deadbolt turn, the Kwikset 966AO Aliso and the Kwikset 966BL Balboa are knob and deadbolt interior packs with the deadbolt keyed one side, both Grade 3 entrance function and both built for Kwikset Signature Series 800 and 687 handlesets. The Schlage Residential JH59 Broadway lever inside trim comes with a Collins deadbolt thumbturn, and the Schlage Residential FC59 Alexandria glass knob interior trim pack includes a deadbolt thumbturn. Note the Kwikset 966 interior packs are matched to Kwikset outside trim, so they are not a drop-in behind a Weslock exterior handleset.
9) Can I use a Kwikset 966 series interior trim behind a Weslock Castletown exterior handleset?
No. The Kwikset 966AO Aliso and 966BL Balboa interior packs are specified for Kwikset Signature Series 800 and 687 handlesets, and the Kwikset 966BRNL-SQT Breton lever trim is a universal design for 687 and 800 Series outside trim. Those are matched to Kwikset exterior trim. The Weslock 7400 Castletown is Weslock interior trim with a 5 pin Weslock keyway and fits doors bored 2-1/8 inch top and bottom cross holes with 5-1/2 inch minimum center to center spacing. Keep the interior trim with the same manufacturer's exterior handleset.
10) How secure is the deadbolt on the Weslock Molten Bronze Castletown set?
The bolt throws 1 inch and carries two hardened steel rollers inside it so a saw blade spins on them instead of cutting. Strikes are heavy duty with 3 inch screws, which reach past the jamb into the framing rather than stopping in the trim. Weslock rates the set above ANSI A156.2 Grade II.
11) How much of the door does the Weslock Castletown interior escutcheon cover?
The trim measures 18-1/2 x 2-3/4 inches with a 2-3/4 inch projection. That length matters on doors with narrow stiles or a glass panel close to the lock edge, so check you have 2-3/4 inches of flat stile to land it on before ordering.
12) Do I need to mortise the door edge for the latch faceplate?
The latch faceplate is 1 x 2-1/4 inches, so if the existing latch mortise matches that footprint the new latch drops straight in. The faceplates come off, which lets you fit a drive-in prep where there is no mortise at all.
13) Is the Weslock Castletown handleset trim rated for commercial or apartment entry doors?
Weslock lists it as residential, and it exceeds ANSI A156.2 Grade II. That suits single family and light multi-family unit entries. For a high traffic commercial opening you want a Grade 1 device instead, not this trim.
14) Is the Weslock 7400 Castletown handed left or right?
No handing to specify. The Wexford knob trim is non-handed and the latch adjusts for backset, so the only choices at order are finish, keying, and door thickness. That is a difference from some lever trims, such as the Kwikset 966BRL Brooklane, which is ordered left hand.
15) The door is 2-1/4 inch thick. Does the Weslock 7400 Castletown or one of the alternates cover it?
The Weslock 7400 Castletown lists a door thickness range of 1-3/8 inch to 2 inch and offers a door thickness selection of 2 inch to 2-1/4 inch, with the description noting optional door thickness up to 2-1/4 inch. Among the peers, the Schlage Residential FC59 Alexandria glass knob interior trim pack reaches 1-5/8 inch to 2-3/4 inch, though it is dummy function rather than a working entry trim. The Kwikset 966BRL-LH and 966BRNL-SQT lever trims and the Schlage JH59 do not state coverage at that thickness.
16) Which interior handleset trim options are handed, and which avoid the handing question?
The Weslock 7400 Castletown carries the Wexford knob, and a knob does not raise a handing choice. The Kwikset 966BRL-LH Brooklane lever is a left hand lever, so it must match the door swing. The Kwikset 966BRNL-SQT Breton lever on a square rose is described as a universal design for 687 and 800 Series outside trim. The Schlage Residential FC59 Alexandria is a glass knob trim pack. If you are ordering across a run of doors with mixed swings, the knob and universal lever options remove one line item you have to verify per opening.
17) How does the Weslock 7400 Castletown compare on grade to the Kwikset and Schlage interior handleset trims?
The Weslock 7400 Castletown exceeds ANSI A156.2 Grade II lock standards. Among the peers, the Kwikset 966BRL-LH Brooklane lever and the Kwikset 966BRNL-SQT Breton lever trims are Grade 2, as are the Schlage Residential F59 Accent and FC59 Alexandria interior packs. The Kwikset 966AO Aliso, the Kwikset 966BL Balboa and the Schlage Residential JH59 Broadway are Grade 3. For a facility standardizing on a Grade 2 residential entry trim, the Grade 3 items sit in a different tier.
18) What finishes does the Weslock 7400 Castletown with Wexford knob come in?
Two: oil rubbed bronze and matte black, both with the Wexford knob. The body is solid molten brass under the finish, and the installation screws are concealed so the escutcheon reads clean once mounted.
19) Will the knob get scratched during install on a painted door?
The knob comes off. Weslock builds the Castletown trim with a removable knob so you can mount the escutcheon and drive the concealed screws without the finish taking a hit, then put the knob on last. Useful on a fresh paint or stain job where the trim goes on before the door is fully cured.
How fast can I get the Weslock 07400--F2SL20 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Weslock 07400--F2SL20 come with a warranty?
Absolutely. The Weslock 07400--F2SL20 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Weslock 07400--F2SL20?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Weslock 07400--F2SL20 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.