You may also like
Weslock 7680 Wiltshire Keyed Entry Handle with Wexford Knob
Model: WES-7680
Weslock STONEBRIAR INTERCONNECTED Single Cylinder Handleset
If security, safety, and style are important to you, then Weslock is your choice for quality hardware for your home. Not only are Weslock...
Weslock
$576.00
$324.58
Weslock WILTSHIRE DUMMY HANDLESET OVERVIEW
If security, safety, and style are important to you, then Weslock is your choice for quality hardware for your home. Not only are Weslock door handle and deadbolt products strong and long lasting, but they also offer a beautiful aesthetic for your home. With designs that enhance the look and feel of your home and details, such as concealed installation screws, that merge function and form, Weslock offers a product unmatched by the competition.
Standard features
- Exceeds ANSI A 156.2 Grade II lock standards
- Solid Molten Brass
- 1” Throw bolt with two hardened steel rollers prevent sawing
- Removable knob/lever prevents scratching during installation
- Fits doors prepared with 2-1/8” top (1-5/8“ optional) and 2-1/8” bottom cross holes and 1” edge hole
- 5-1/2” minimum center to center cross hole spacing
- Optional door thickness up to 2-1/4”
- Adjusts to door thickness from 1-3/4” - 2”
- Limited Lifetime Mechanical Warranty
- Limited 10 Year Finish Warranty
Manufacturer Resources
Product Specs
- Product Group:
- Mechanical Locks
- Series:
- Molten Bronze Series
- Warranty:
- Limited Lifetime Mechanical and Limited 10 Year Finish
- Collection:
- Molten Bronze
- Keyed:
- No
- Cross Bore:
- 2-1/8"
- Product Subgroup:
- Bored Locksets
- Product Type:
- Exterior Handle Only
- Subcategory:
- Residential Handlesets
- Commercial/Residential:
- Residential
- Keyed Function:
- Non-Keyed
- Lock Function:
- Dummy
- IMAP Policy:
- Yes
- Product Function:
- Dummy
- Door Thickness Range:
- 1-3/4" to 2"
- Product Style:
- Wiltshire
- Product Substrate:
- Brass
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Weslock 07685-2--0020 – Frequently Asked Questions
1) Does the Weslock 7685 Wiltshire dummy handleset actually latch or lock the door?
No. The 7685 Wiltshire is a dummy function handleset, non-keyed, with no latch and no bolt. It is a pull that mounts to the door face only, which is why it is used on the inactive leaf of a double door, on a french or patio door, or anywhere you want the look of a handleset without any operating hardware. If you need the door to latch or lock, you need an entry or keyed handleset instead.
2) Do I get the interior trim with the Weslock 7685, or only the outside half?
Only the outside half. The 7685 Wiltshire is an exterior handle only, so there is no interior knob, lever, or rose in the package. On a double door where both faces show, plan on a separate inside trim piece.
3) What door thickness does the Weslock Wiltshire handleset fit?
Standard setup covers 1-3/4 inch to 2 inch doors, which is where most exterior residential doors land. For thicker doors there is a 2 inch to 2-1/4 inch option that has to be selected when you order, so measure the door edge before you pick. There is no configuration for a thin 1-3/8 inch interior door.
4) Will the Weslock 7685 cover the holes in a door already bored for a handleset?
It fits doors prepped with a 2-1/8 inch top cross bore (1-5/8 inch is an option) and a 2-1/8 inch bottom cross bore, with a 1 inch edge bore, and it needs at least 5-1/2 inch center to center between the two cross holes. If your existing door has that standard two-bore handleset prep, the Wiltshire drops onto it. If the spacing is tighter than 5-1/2 inches, it will not line up.
5) I need a handleset that actually locks, not a dummy - what should I order instead of the Weslock 7685 Wiltshire?
The 7685 Wiltshire is a dummy, non-keyed exterior handle with no latch or cylinder, so it only pulls. For a lockable opening, the Schlage Residential F58 Addison is an exterior active handleset with a C keyway in entrance function, and the JH58 with Barcelona trim is a single cylinder entrance handleset. The F58 Addison fits 1-3/8 inch to 1-3/4 inch doors and is Grade 2; the JH58 covers the same 1-3/8 inch to 1-3/4 inch range and is Grade 3.
6) What is the closest equivalent to the Weslock 7685 Wiltshire dummy handle from another brand?
The Schlage Residential F92 Custom Addison Dummy Exterior Handleset is the closest match in role: it is also a dummy function exterior handleset half. The difference that decides the order is the door: the Weslock 7685 Wiltshire adjusts to a door thickness of 1-3/4 inch to 2 inch, while the F92 Addison is specified for 1-3/8 inch to 1-3/4 inch doors. On a standard 1-3/4 inch door either will sit; on a thicker door the Weslock is the one that covers it. The F92 also carries a Grade 2 rating, and the Wiltshire is stated to exceed ANSI A156.2 Grade II lock standards.
7) My door is 2-1/4 inches thick - which handleset covers it?
The Weslock 7685 Wiltshire adjusts from 1-3/4 inch to 2 inch as standard and is offered with an option for 2 inch to 2-1/4 inch doors, so it reaches 2-1/4 inch as a dummy pull. If the opening also needs to lock, the Schlage Residential FCT58 Custom Addison keyed entry single cylinder handleset is rated for 1-5/8 inch to 2-1/4 inch doors and is Grade 2. The other Addison variants, F58 and F92, stop at 1-3/4 inch.
8) Can I key the Weslock 7685 Wiltshire to match my other doors?
No. It is a non-keyed dummy, with no cylinder to key. Keying only matters on the entry handleset next to it; the Wiltshire dummy just has to match that hardware's finish and trim.
9) Will the Schlage F92 Addison dummy work as a drop-in replacement for a Weslock 7685 Wiltshire?
They share the dummy function, but treat them as different products rather than interchangeable trim. The Weslock 7685 Wiltshire is a Molten Bronze Series solid brass handle in the Wiltshire style and is set up for 2-1/8 inch cross bores with 5-1/2 inch minimum center to center spacing, adjusting to 1-3/4 inch to 2 inch doors. The Schlage F92 is an Addison design in the FC Series for 1-3/8 inch to 1-3/4 inch doors. Style, door prep, and thickness range all need to be confirmed against the existing opening before swapping one for the other.
10) What is the difference between the Schlage JH58 Barcelona and the F58 Addison if I want a keyed handleset alongside a Weslock 7685 Wiltshire dummy?
Both are single cylinder entrance handlesets for 1-3/8 inch to 1-3/4 inch doors. The F58 Addison carries a C keyway and is Grade 2; the JH58 uses Barcelona trim and is Grade 3. The Weslock 7685 Wiltshire itself is non-keyed, so it pairs as the inactive or fixed side of a pair of doors rather than as the locking leaf.
11) What finishes does the Wiltshire exterior dummy handle come in?
Two: Oil Rubbed Bronze and Matte Black. Both are dark finishes, so if you are matching existing Weslock hardware on a house, those are the choices in this trim.
12) Is this handleset solid brass or a plated casting?
The Wiltshire is built from solid molten brass, which is what the Weslock Molten Bronze Series refers to. It is a residential grade product, not a commercial spec item.
13) Does the Weslock Wiltshire dummy handleset need to be ordered left or right handed?
Handing is not an ordering choice here. Because it is a dummy exterior half with no latch mechanism, there is nothing to hand, unlike a keyed entry set where the latch and trim have to match the swing.
14) Is this Weslock handleset suitable for an apartment building or commercial entrance?
It is classed residential, and as a dummy pull it carries no security function at all. For multi-family common areas or commercial openings you want a graded keyed or commercial lockset; the Wiltshire is for unit doors and homes where the look is the point.
How fast can I get the Weslock 07685-2--0020 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Weslock 07685-2--0020 come with a warranty?
Absolutely. The Weslock 07685-2--0020 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Weslock 07685-2--0020?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Weslock 07685-2--0020 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.