You may also like
Wire 3/32 x 5' Kwik-Loc Cbl & Join (1 pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Group:
- Hangers, Supports & Fasteners
- Product Subgroup:
- Cable Support Systems
- Product Type:
- Wire Rope Hanger
Metallics RLC5 – Frequently Asked Questions
1) What cable size and length comes with the Metallics RLC5 Kwik-Loc hanging kit?
The Metallics RLC5 is a single-piece kit with 3/32 inch cable in a 5 foot length, supplied with the Kwik-Loc cable and joiner together. Order quantity is one piece, so a run needing multiple suspension points takes one kit per point.
2) Is the RLC5 a complete kit or do I need to buy the locking device separately?
Both parts come together. The RLC5 ships as one piece that includes the 3/32 inch by 5 foot cable and the Kwik-Loc joiner, so you are not sourcing the gripper separately. What is not included is the anchor into the structure above, so plan on your own beam clamp, eye bolt, or deck anchor to suit the overhead you are attaching to.
3) Can I use the Metallics RLC5 to hang light fixtures or cable tray in an electrical install?
Yes, that is the intent. The RLC5 is an electrical department suspension item: a 3/32 inch aircraft-type cable with a Kwik-Loc grip used to hang fixtures, strut, and raceway from structure. The locking joiner lets you set height by pulling the cable through and releasing, rather than cutting threaded rod to length.
4) Will a 5 foot cable reach from a high deck down to my fixture height?
Each RLC5 gives you 5 feet of 3/32 inch cable per hanger, which covers most drops from deck to a suspended fixture or tray in a typical commercial ceiling cavity. For deeper plenums or open high-bay structure, a 5 foot length will come up short, so step up to a longer Kwik-Loc cable length instead of splicing two kits together.
5) How many RLC5 kits do I need per fixture?
The RLC5 is sold one piece at a time and each piece is a single suspension point. A two-point hang on a linear fixture takes two, and a four-corner hang on a tray section or large fixture takes four. Count your attachment points, not your fixtures, when you build the order.
6) Do I have to cut the cable to length when using the Kwik-Loc hanger?
No cutting is needed to set the drop. The Kwik-Loc joiner on the RLC5 grips the 3/32 inch cable where you set it, so you pull the cable through to the height you want and the lock holds it. Excess tail can be left or trimmed off, which makes it faster than measuring and threading rod for each point.
7) What is the Metallics part number to reorder this cable hanger?
Order it as Metallics RLC5. That number covers the complete one-piece assembly with the 3/32 inch by 5 foot cable and the Kwik-Loc joiner, which is what a distributor or MRO storeroom should put on a standing line item.
How fast can I get the Metallics RLC5 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics RLC5 come with a warranty?
Absolutely. The Metallics RLC5 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics RLC5?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics RLC5 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.