IDEAL Industries 44-110 Wire Marker Booklet, Asst 1,2,3,A,B,C,T1,T2,T3,L1,L2,L3

The IDEAL 44-110 booklet is the assortment book carrying 1, 2, 3, A, B, C, T1, T2, T3, L1, L2 and L3. That combination covers phase and terminal marking on three-phase feeders and motor leads, so one pocket book handles both the numeric conductor IDs and the T/L motor terminal designations without carrying separate single-legend books.

Yes. The 44-110 markers are rated for use above or below ground and resist moisture, dirt, oil and abrasion. Service temperature runs -40F to 180F (-40C to 82C), which covers unconditioned attics, exterior panels and buried vault work.

Each marker is 1/4 in. x 1-1/2 in. and is perforated so it can be torn into half-length pieces. The full length wraps larger conductors with overlap; the half length is what you use on small control wire or in tight terminal strips where a full wrap would bunch up.

Go with the 44-110 assortment when you are marking varied circuits on service and troubleshooting work, since it carries 1, 2, 3, A, B, C, T1, T2, T3, L1, L2 and L3 in one pocket-size booklet. Single-legend books make more sense only for repetitive production work where you need many copies of one number and would run the assortment dry on a single page.

The legend is a non-smear black print on plastic/cloth construction, and the marker body is built to resist abrasion, moisture, dirt and oil. That is what keeps a label readable in a panel that gets handled, or on conductors pulled through a dirty raceway.

Order IDEAL Industries 44-110. That is the manufacturer part number for the assorted booklet with 1, 2, 3, A, B, C, T1, T2, T3, L1, L2, L3 legends.