IDEAL Industries 44-107 Wire Marker Booklet, Asst T1, T2, T3, 150 Each

The IDEAL 44-107 booklet is an assortment of T1, T2 and T3 legends, 150 markers total. It's a pocket-size booklet, so an electrician can carry it in a shirt pocket while pulling and tagging circuits rather than hauling a full marker book.

Yes. These wire markers are rated for use above or below ground, and the plastic-cloth construction resists moisture, dirt, oil and abrasion. That covers direct-burial pull boxes, handholes and damp mechanical rooms as well as dry panel work.

Each marker is 1/4 in. x 1-1/2 in. and perforated, so you can tear it into half-length tags for small-gauge conductors or tight terminations where a full-length wrap won't lay flat.

The 44-107 markers are rated from -40F to 180F (-40C to 82C). That spans unconditioned attics and rooftop conduit runs through to outdoor winter work, so the same booklet works on a cold-weather service call and inside a hot equipment room.

The legend is printed non-smear black on a plastic-cloth stock built to resist abrasion, moisture, dirt and oil, so tags stay legible in a panel that gets re-entered years later. That matters for MRO and facility crews who have to trace circuits long after the install.

An assortment like the 44-107 (T1, T2, T3, 150 markers) suits service and troubleshooting work where you tag a handful of conductors per job and can't predict which legends you need. If you're labeling long repetitive runs, say fifty conductors all tagged the same, single-legend books are the better buy because the assortment will run out of one character long before the others.